To start with I can only move the 7 ½’ mesh dish between Galaxy 12 and AMC 10 until all the leaves fall off the three trees that are in the way right now. Line from the C/Ku LNBF goes into a Sat-Pro II Plus satellite protection system, then to a 2-way 900-2050 MHz splitter with one line going to the StarBox and the other going to the GI 2770R.
The StarBox is only listing 11 pay channels on AMC 10 and a partial listing on the other satellites that I can get right now. When you look at the LyngSat listing for the satellites there is a lot more than just 11 pay channels. The HSN (Home Shopping Network) and other NTSC channels will not work through the StarBox? but works through the GI 2770R. There is a hissing noise with all the C-Band channels that do come through the GI 2770R. Using the new C/KU Digital LNBF BSC621-2 sure made a big improvement on the C-Band reception. Have not done anything on the K-Band yet. In the StarBox’s satellite scan menu I’m getting a 94% strength reading and 99% quality reading.
I guess the question is should the NTSC crypt work with the StarBox? Should the StarBox be showing all the channels on each satellite? and How do I get rid of the hissing noise from channels that are working through the GI 2770R? Thanks for the help.
The StarBox is only listing 11 pay channels on AMC 10 and a partial listing on the other satellites that I can get right now. When you look at the LyngSat listing for the satellites there is a lot more than just 11 pay channels. The HSN (Home Shopping Network) and other NTSC channels will not work through the StarBox? but works through the GI 2770R. There is a hissing noise with all the C-Band channels that do come through the GI 2770R. Using the new C/KU Digital LNBF BSC621-2 sure made a big improvement on the C-Band reception. Have not done anything on the K-Band yet. In the StarBox’s satellite scan menu I’m getting a 94% strength reading and 99% quality reading.
I guess the question is should the NTSC crypt work with the StarBox? Should the StarBox be showing all the channels on each satellite? and How do I get rid of the hissing noise from channels that are working through the GI 2770R? Thanks for the help.