I have a BSC621-2 on a BUD. - This dish was used on an old analog system and has not been adjusted for years. But I am picking up channels fine, however, sometimes they get the digital fade in and out.
For dialing in the dish and 621, where should I start?
Should I put the dish on the due south satellite and put the 621 straight up and down in the zero position, then try to get the best happy medium between c and ku at that point? From there should all other sats be solid without further dish adjustments?
For dialing in the dish and 621, where should I start?
Should I put the dish on the due south satellite and put the 621 straight up and down in the zero position, then try to get the best happy medium between c and ku at that point? From there should all other sats be solid without further dish adjustments?
