gredneck SatelliteGuys Pro Dec 25, 2003 154 0 Oct 13, 2004 #1 I have an old DIRECPC dish w/lnb, does anyone know if I can use that to get 121? thanks
M Mr Tony SatelliteGuys Pro Supporting Founder Nov 17, 2003 2,112 8,603 Mankato, MN Oct 13, 2004 #2 yes it would work (maybe) as long as your Dish500 is Legacy equipment, you should be OK
J jlhugh Supporting Founder Supporting Founder Nov 25, 2003 866 0 Austin, Texas, United States Oct 13, 2004 #3 Don't you need to rotate the LNB like 180 degrees to get it to work?
M Mr Tony SatelliteGuys Pro Supporting Founder Nov 17, 2003 2,112 8,603 Mankato, MN Oct 13, 2004 #4 for directPC...no They work just like a Primestar setup
M Mr Tony SatelliteGuys Pro Supporting Founder Nov 17, 2003 2,112 8,603 Mankato, MN Oct 14, 2004 #6 does the DirectPC have 2 outputs or one?
M Mr Tony SatelliteGuys Pro Supporting Founder Nov 17, 2003 2,112 8,603 Mankato, MN Oct 14, 2004 #8 then you'd be all set
M Mr Tony SatelliteGuys Pro Supporting Founder Nov 17, 2003 2,112 8,603 Mankato, MN Oct 14, 2004 #10 all you have to do is after you aim it, plug that output into "2" of the SW21 and the Dish500 to "1" and run check switch
all you have to do is after you aim it, plug that output into "2" of the SW21 and the Dish500 to "1" and run check switch
L larrystotler SatelliteGuys Pro Jun 5, 2004 591 0 Winchester, VA Oct 14, 2004 #11 The 1 output LNB will only allow you to run 1 receiver with it.