switch question

Status
Please reply by conversation.

cruzin

SatelliteGuys Pro
Original poster
Apr 13, 2009
323
0
michigan
My question is, can one use a switch after a zinwell 6x8 either on 22khz on or 22khz off? Go from a zinwell to a 1x4 disqec?
thanks
 
Thanks Iceberg, My setup problem is the C band is so far away from my stationary ku antennas. So I was hoping to run 1 coax our from the zinwell and have a 4x1 disq switch out at the c band for v and h. Now it looks as if I would have to run2 or 4 coax out to them. Which is 75' from the zinwell. SoI have to do some re arrainging of the dish locations for this to work out. thanks again If I want all receivers to be able to access all dishes. Or just have one tv able to receive the c band. thanks again
yes and no

receiver------diseqc------6x8 (well actually its a 4x8)----LNB's will work
receiver----------6x8------diseqc wont


I have a few 4x4 multiswitches set up and on the outputs those go to diseqc switch

see here
http://www.satelliteguys.us/1344315-post8.html
 
That wouldnt work anyways as to have both polarities you need two lines from the LNB to the switch
 
Status
Please reply by conversation.

fiberglass bud opinions...

Question

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)