Time to upgrade? cable question (and maybe more)

  • ENJOY SATELLITEGUYS AD FREE THIS FEBRUARY!

    Thank you to the very generous support we got from our members in December we have decided to make the month of February AD FREE for everyone!

    We want to see the true speed of our site and enjoy SatelliteGuys the way it was meant to be enjoyed!

    If you would like to help us keep the lights on and keep enjoying the site AD FREE consider becoming a PUB MEMBER by CLICKING HERE.

    THANK YOU TO EVERYONE FOR YOUR SUPPORT!
Could you please elaborate on the details of the cabling (and this "node" you refer to), so I better understand?
Right now, we have HDMI (I believe) running from the actual sat dish (on the roof) to a plastic junction box on the exterior of our house. (Is this plastic jucntion box the "node" you're referring to? If not, what is the node?) Then there are 3 coax cables going out from the plastic junction box to....
  • one coax goes from the junction box to the 722 in the living room (there's a HD TV#1 connected directly to the 722 via HDMI)
  • one coax goes from the junction box to TV#2 in the upstairs bedroom (this has only been receiving an SD signal but we want HD up there now)
  • one coax goes from the junction box to the 211k connected to TV#3 in an upstairs office (this is an older, small TV and currently doesn't need HD)
You could get HD to TV 2 location by moving your 211K to TV 2 then going to the junction box and switching the wires going to TV 2 and TV 3. TV 3 would then connect the same as TV 2 used to and TV 2 would have its own box. The only drawback is it would not share recordings with TV 1. If you want to share HD recordings with TV 1 you must go with a Hopper system.
 

Is there a hardware guide?

Hopper DVR records programs, sometimes doesn't list them

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)