EVERY Day for the last two weeks I have had one timer that keeps stopping at 12 minutes:Morning Joe on HD channel 209 from 5:00am -8:00am. I have the 722k receiver and the 1000.2 sat dish and a side sat for 61.5. Some things I 've doon to try to fix it.
1) Now I have changed the remote control codes on both remote controls to different codes , just in case the neighbor across the street with DISH has been changing my show.
2) I have changed the timer to Mon-Fri from new, from New to Daily, fom New to Manual , from Manual to DISH Pass. Doesn't matter the show stops at 12 minutes.
3) My update time is set for 1:30 am and the status updates on the counters shows around 7:30 am daily.
4) Checked today to see if the transponder is weak. I am getting a 61 Strength on the transponder on 129 sat. But when I first hit pip and changed to the channel that was supposed to be recording and checked, I got a lost transponder screen. Checked again after changing the channels from 209 to 208 and back and now I am getting 47 strength on 61.5 sat trasnponder 31 . So it changed from 129 sat to 61.5 sat.
5) Diagnostics screens all show good on all sats.
Today I set a manual timer along with the regular timer for the same channel and show , to back up my show. I hope this fixes the problem. Any one else have this problem on a 722k?
1) Now I have changed the remote control codes on both remote controls to different codes , just in case the neighbor across the street with DISH has been changing my show.
2) I have changed the timer to Mon-Fri from new, from New to Daily, fom New to Manual , from Manual to DISH Pass. Doesn't matter the show stops at 12 minutes.
3) My update time is set for 1:30 am and the status updates on the counters shows around 7:30 am daily.
4) Checked today to see if the transponder is weak. I am getting a 61 Strength on the transponder on 129 sat. But when I first hit pip and changed to the channel that was supposed to be recording and checked, I got a lost transponder screen. Checked again after changing the channels from 209 to 208 and back and now I am getting 47 strength on 61.5 sat trasnponder 31 . So it changed from 129 sat to 61.5 sat.
5) Diagnostics screens all show good on all sats.
Today I set a manual timer along with the regular timer for the same channel and show , to back up my show. I hope this fixes the problem. Any one else have this problem on a 722k?
