Torque wrench

[garys]

Your diagram shows adding a wing dish to a Superdish, both with DP lnb's, the 1000.4 has DPP lnb with built in switch. If 3 or less receivers are being used with the 1000.4, the DPP44 external switch is not needed.

 

[excalibur]

sorry again guys I dont much about technical terms but in fact I dont have what mancenta as describeb a dpp44 but rather to TheKrell that is a DP Plus with built in switches, 3 outputs and on input. So now being clear do I need only my receiver cable connected to one output and leave the others free, if of course the 3 satellite ,61.5, 72.7 and 77 have beeb aligned.

 

[TheKrell]

Yup. One cable from your receiver to a 1000.4 output and that's it.

 

[excalibur]

thanks guys you were a great help

 

[excalibur]

Hi,

Is it really necessary to adjust the dish mast perfectly on level, otherwise it could be somehow difficult to find and aligned the satellites.

 

[garys]

You want it level in order to use exact numbers from original pointing, if the mast is off, all your numbers will be off.

 

[excalibur]

Thanks garys,

 

[excalibur]

Hi,
Finally my dish 1000.4 was installed but the only issue is that satellite 77 doesn't brodcats, in the system info from the menu of the TV satellite 77 has a red square with a white cross under it, i did a resetting ,I unplug the vip 211 about 20 minutes, but no can do, but I have all hd and sd channels as usual.

 

[garys]

77 has local HD channels at the moment, if your channels are not on 77, you do not need it.

 

[excalibur]

Hi,

Thanks garys, I'm glad to known that, indeed I have all my hd and sd channels.

 

[excalibur]

Hi,

Thanks garys, I'm glad to known that, indeed I have all my hd and sd channels without satellite 77.