true free to air

[cheito]

i have a 30inch fta dish with a invacom lnb two linar and two circular outlets i live in the usa florida and this will be a moterized dish my question is on the lnb hook up do i need a disque switch to hook up one side on the linear and the circular ??? like where should i hook up the circular on lnb 1 and the linear on lmb 2 ?? and where sould i point the dish on tru south need help thanks.

 

[Lak7]

Yes, you align to a Sat as close to Your Longitude as possible:
Dishpointer.com, enter you location, select your Motor from the bottom of the Sat List, click GO.

The switch must be located after the motor......

Receiver-------------Motor---------------Port1-------------"L" port on LNB
...........................................................Port2-------------"C" port on LNB

"You" must set up each Sat in the receiver with proper info
Linear Sats:
LNB: Standard or Single
LNB Freq / L.O.: 10750
DiSEqC: 1
Motor: USALS, enter you Long and Lat

Circular Sats:
LNB: Standard or Single
LNB Freq / L.O.: 11250
DiSEqC: 2
Motor: USALS, enter you Long and Lat

 

[cheito]

thanks !! for this usefull thread i have learned a lot of what you have provided me thanks again.

 

[cheito]

question once i find my first satellite how does the others come in does the moter runs and stops when each satellite come in how ???

 

[hd fan]

THE

 

[hd fan]

the receiver calculates the exact amount of degrees to rotate either east or west and then sends a command instructing the rotor to rotate to XX.X degrees either clockwise or counterclockwise accordingly.