TV2 can not recognize signal

[cowentz]

I have a dual tuner DVR receiver. HD on output 1 only. Left for work yesterday and everything was fine. Came home and TV 2 says it does not recognize signal. TV1 works fine. On phone with dish for 1 1/2 hrs last night, and no fix. It acts as if it is on the wrong channel but it is not. I have tried channel 60, and 73, I have unplugged the tv, reset the receiver, and have done a channel search on the tv (which found no channels). I won't be available to take off work for someone to come out until mid next week. Is there anything else I can try? Thanks

 

[ZachS@DISH]

I have a dual tuner DVR receiver. HD on output 1 only. Left for work yesterday and everything was fine. Came home and TV 2 says it does not recognize signal. TV1 works fine. On phone with dish for 1 1/2 hrs last night, and no fix. It acts as if it is on the wrong channel but it is not. I have tried channel 60, and 73, I have unplugged the tv, reset the receiver, and have done a channel search on the tv (which found no channels). I won't be available to take off work for someone to come out until mid next week. Is there anything else I can try? Thanks

When you say you have tried channel 60 and 73 you mean on the TV itself? What is the modulator setup set to Air or Cable? You can find that by pressing menu then 6-1-5 from TV 1?

 

[Lord_Vader]

You might also want to check if the TV has changed from "NORM/AIR" or something. I don't remember what you use for Dish, but I think it is equivalent to antenna, not CATV.

Cable TV Connection Guide

 

[cowentz]

I have tried air 60, and cable 73. Set up through the modulator, and then tried that channel on the TV. neither worked. We went through the tv menu and the tv is setup as cable, so cable 73 should be the channel

 

[Lord_Vader]

Can you try hooking the TV2 out to your other TV? ( TV1)

( just there locally )

 

[cowentz]

I will try that this evening.

 

[cowentz]

The output on the receiver went bad. They gave me a new receiver.

 

[Lord_Vader]

ok

 

[navychop]

The output on the receiver went bad. They gave me a new receiver.

Thanks for letting us know how it turned out.