Urgent Testing Assistance for Galaxy 19 Temporary Transponder

  • WELCOME TO THE NEW SERVER!

    If you are seeing this you are on our new server WELCOME HOME!

    While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!

    Thank you for your patience and again WELCOME HOME!

    CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
Status
Please reply by conversation.

SatelliteAV

SatelliteGuys Master
Original poster
Lifetime Supporter
Sep 3, 2004
6,486
186
Roseville, CA
5:30pm EST 3/18/2010 - Request from Uplinker and IntelSat Engineering

We urgently need your testing assistance for a temporary transponder currently Testing until 12mid EST today 3/18/2010.


  1. Please provide Signal Level and Signal Quality for these 4 transponders.
  2. Indicate if you peak SQ for 11842, does the SQ drop on the other TPs?


  • TP6 - Frequency: 11842 Polarity: Horizontal Symbol Rate: 22000 -SL SQ
  • TP11 - Frequency: 11929 Polarity: Vertical Symbol Rate: 22000 -SL SQ
  • TP13 - Frequency: 11960 Polarity: Vertical Symbol Rate: 22000 -SL SQ
  • TP25 - Frequency: 12146 Polarity: Vertical Symbol Rate: 22000 -SL SQ
 
Minneapolis, MN
Coolsat 5000/Geosatpro 36" dish

11929-76
12146-75
11842-75
11960-75...actually bouncing between 72 & 75

no I did not peak on 11842. I am peaked on 11966 but even if I try on the 36" to peak on 11842 I dont gain anything quality wise and dont lose anything on the other...When one goes they all go
 
The 30" has different results

11842-73
11929-75
11960-75/76
12146-75

I am peaked on 12115...If I peak the 30" to 11842 then I lose quality on a few transponders like 11966
 
North Florida
Pansat 9200HD/1.0m Primestar

11842 73%

11929 70%

11960 60-68%

12146 68%

...Overcast skies today, so readings may be a few points low. :)
(Also this dish is fixed on G19)
 
Coolsat 6000 1.2 Meter

* TP6 - Frequency: 11842 Polarity: Horizontal Symbol Rate: 22000 94
* TP11 - Frequency: 11929 Polarity: Vertical Symbol Rate: 22000 94
* TP13 - Frequency: 11960 Polarity: Vertical Symbol Rate: 22000 93
* TP25 - Frequency: 12146 Polarity: Vertical Symbol Rate: 22000 94

Same if I peak for 11842.
 
Fortec 90 cm, Coship 3188C
San Jose, California

11842 H SL 74.5 SQ 55

11929 V SL 75.1 SQ 54

11960 V SL 75.4 SQ 53

12146 V SL 76.1 SQ 55

2. Indicate if you peak SQ for 11842, does the SQ drop on the other TPs? No
 
Sacramento, CA / Clear / 72F / 90cm GEOSATpro

TP6 - Frequency: 11842 Polarity: Horizontal Symbol Rate: 22000 -SQ 80 (peaked - Bump to west fraction of a degree)
TP11 - Frequency: 11929 Polarity: Vertical Symbol Rate: 22000 -SQ 77
TP13 - Frequency: 11960 Polarity: Vertical Symbol Rate: 22000 -SQ 55
TP25 - Frequency: 12146 Polarity: Vertical Symbol Rate: 22000 -SQ 75
--------------------------------------------------------------------------------
TP6 - Frequency: 11842 Polarity: Horizontal Symbol Rate: 22000 -SQ 65
TP11 - Frequency: 11929 Polarity: Vertical Symbol Rate: 22000 -SQ 80
TP13 - Frequency: 11960 Polarity: Vertical Symbol Rate: 22000 -SQ 70 (peaked)
TP25 - Frequency: 12146 Polarity: Vertical Symbol Rate: 22000 -SQ 80
 
Chicago on a 90 CM dish & pansat 9200

11842 H SL 71 SQ 58-61 fluctuating

11929 V SL 72 SQ 56

11960 V SL 72 SQ 10 -24 (fluctuating)

12146 V SL 70 SQ 44 & 58, It was at 44 for a moment and now is fluctuating between 52 & 58
 
Central Mexico / Clear / 84F / 90cm GEOSATpro

TP6 - Frequency: 11842 Polarity: Horizontal Symbol Rate: 22000 -SQ 53
TP11 - Frequency: 11929 Polarity: Vertical Symbol Rate: 22000 -SQ 59
TP13 - Frequency: 11960 Polarity: Vertical Symbol Rate: 22000 -SQ 50
TP25 - Frequency: 12146 Polarity: Vertical Symbol Rate: 22000 -SQ 55
 
So Cal 93555 area code / China Lakes Naval Weapons Center / clear / temp 78°
GEOSAT pro 36" motorized dish
Coolsat 6100 private

Peaked on 11842:
TP6 - 11842 Polarity: Horizontal Symbol Rate: 22000 -SL SQ = 84%
TP11 - 11929 Polarity: Vertical Symbol Rate: 22000 -SL SQ = 86%
TP13 - 11960 Polarity: Vertical Symbol Rate: 22000 -SL SQ = 76 to 78% touchy
TP25 - 12146 Polarity: Vertical Symbol Rate: 22000 -SL SQ = 86%


Peaked on 11960:
TP6 - 11842 Polarity: Horizontal Symbol Rate: 22000 -SL SQ = 84%
TP11 - 11929 Polarity: Vertical Symbol Rate: 22000 -SL SQ = 84%
TP13 - 11960 Polarity: Vertical Symbol Rate: 22000 -SL SQ = 82 to 84% touchy
TP25 - 12146 Polarity: Vertical Symbol Rate: 22000 -SL SQ = 85%

First peaked on 11842, I then had to jog the motor slightly EAST to fine tune 11960 which I found very touchy to peak. All of these TP's seem a bit touchy today as if the beam has been narrowed or more narrow than days ago.
 
97222 / Coolsat 6000 / Geosatpro 90cm / Geosatpro GSL1u / Wx: Sunny and Dry

TP6 - Frequency: 11842 Polarity: H SR: 22000 -SQ 70
TP11 - Frequency: 11929 Polarity: V SR: 22000 -SQ 72
TP13 - Frequency: 11960 Polarity: V SR: 22000 -SQ 70 (peaked)
TP25 - Frequency: 12146 Polarity: V SR: 22000 -SQ 70
=================================
TP6 - Frequency: 11842 Polarity: H SR: 22000 -SQ 73 (peaked)
TP11 - Frequency: 11929 Polarity: V SR: 22000 -SQ 73
TP13 - Frequency: 11960 Polarity: V SR: 22000 -SQ 67
TP25 - Frequency: 12146 Polarity: V SR: 22000 -SQ 69-72 fluctuating
 
Last edited:
31" fortec
TP6 - Frequency: 11842 Polarity: Horizontal Symbol Rate: 22000 -SQ peaked 55 a nudge west
TP11 - Frequency: 11929 Polarity: Vertical Symbol Rate: 22000 -SQ 55
TP13 - Frequency: 11960 Polarity: Vertical Symbol Rate: 22000 -SQ 54
TP25 - Frequency: 12146 Polarity: Vertical Symbol Rate: 22000 -SQ 54
--------------------------------------------------------------------------------
TP6 - Frequency: 11842 Polarity: Horizontal Symbol Rate: 22000 -SQ 42
TP11 - Frequency: 11929 Polarity: Vertical Symbol Rate: 22000 -SQ 46
TP13 - Frequency: 11960 Polarity: Vertical Symbol Rate: 22000 -SQ 56(peaked)
TP25 - Frequency: 12146 Polarity: Vertical Symbol Rate: 22000 -SQ 54
 
Milwaukee/Madison:
N-fusion HD 90cm WSI Inva SNH-031

11842 SL 99% SQ 53%
11929 SL 99% SQ 51%
11960 SL 99% SQ 70-75%
12146 SL 99% SQ 62%

No peaking of dish, dish is fixed to G19

Musher
 
I just tried peaking all frequencies requested on my unimesh 7.5 and i noticed as i nudged west i lost all signal on all fr's except 11842 .Mind you the sig dropped off quite a bit but hung there for , 4 more clicks ( west ) till it dropped on the GBOX.
 
Fortec Merc II one meter Fortec Dish
Freq SL SQ
11842 78 66
11929 80 64
11960 78 64
12146 77 64

Skywalker 1 slaved off of the Merc II
Freq SS SNR(dB)
11842 74 11.2
11929 71 10.8
11960 74 11.1
12146 72 10.7

Dish is already peaked on 11842
 
can´t pick G19

Can't pick up G19 Horizontal using satmeter, only vertical. Can't pick up on receiver 11842 h 22000,but 11960 v 22000 signal quality 54-58 . Leon,Mexico.
 
CS5K on an Andrews 1.2m:
L/Q
11842: 88/76
11929: 89/79 (peaked)
11960: 89/77
12146: 89/78

11842: 88/76
11929: 89/76
11960: 89/79
12146: 89/78 (peaked)


Genpix on an Andrews 1.2m:
SNR (dB)
11842: 11.4 - 11.6
11929: 12.1 - 12.2
11960: 11.1 - 11.2
12146: 11.6 - 11.8


 
Status
Please reply by conversation.

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Who Read This Thread (Total Members: 1)

Latest posts