VCT for NET1,2,3 on 89w

[rgk]

Can anyone tell me what the VCT is for Nebraska PBS NET1-3 on 89W Transponder 4 (3780H)? Trying to receive it on a DSR4000. Thanks.

 

[tvropro]

Can anyone tell me what the VCT is for Nebraska PBS NET1-3 on 89W Transponder 4 (3780H)? Trying to receive it on a DSR4000. Thanks.

Can the 4000 do 29270 7/8? if so this may help:

Galaxy 28 at 89.0°W - LyngSat

 

[rgk]

The DSR needs a VCT (Virtual channel table no.) which can be between 0 and 99999 (based on what I have read, I'm new to this receiver). Lyngsat lists it in the ONID - TID column for some channels. It's blank for the NET FTA channels. The DSR4000 finds the symbol rate and FEC in auto mode without any problem.

 

[photoman76]

This is an odd one. TSReader usually shows the VCT number, but for this mux none is shown. The format is different than most DCII muxes. TSReader shows the Network Type as ATSC instead of DCII.

 

[stargaze]

I haven't had time to look or pull out the old equipment at this time but the old VCT when they were on T5 was 237.
I don't think this should have changed, but I could be wrong.

 

[rgk]

Thanks, I'll give that a try and let you know.

 

[B.J.]

I haven't had time to look or pull out the old equipment at this time but the old VCT when they were on T5 was 237.
I don't think this should have changed, but I could be wrong.

I think this is correct. That's what my 4200 shows on Diag A, line 6 .