Hi I can not program my 311 DN remote to control my Viore 32inch tv. I have tried the scan method to no success. Any one else have had problems? And any other way I can get the Dishnetwork remote to control my tv? Thank you
VIORE TV
- Thread starter 4DTV78
- Start date
- Latest activity Latest activity:
- Replies 12
- Views 10K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
You need to be specific about which remote you have (by model number).
Unless your remote is less than a few months old, it probably doesn't support Viore (Akai).
That being said, you might try some of the Akai codes.
RemoteCentral has a thread on Viore and by-and-large, the news is not encouraging with respect to pre-programmed remote compatibility.
Have you tried controlling everything with the Viore remote? DISH receivers are supported by just about everything.
Unless your remote is less than a few months old, it probably doesn't support Viore (Akai).
That being said, you might try some of the Akai codes.
RemoteCentral has a thread on Viore and by-and-large, the news is not encouraging with respect to pre-programmed remote compatibility.
Have you tried controlling everything with the Viore remote? DISH receivers are supported by just about everything.
Remotes.
DISH Network - Tech Portal
Click on a remote thats yours , and you'll see menu options on what you want to do.
DISH Network - Tech Portal
Click on a remote thats yours , and you'll see menu options on what you want to do.
Not the receiver model, the remote model. you probably have is ether a 3.0 or a 4.0 remote, those ones don't have the right codes stored in them. Any of the following would probably work 5.3/5.4, 6.3/6.4, 20.0, 21.0.
I will post remote model number later today. Thank you for all the help you are giving me.
If you click on my link I posted, You'll be able to figure out what you need.
Right Here.
http://tech.dishnetwork.com/departmental_content/TechPortal/content/tech/remotehome.shtml
Then you are most likly SOL.
You need a newer remote.
I hate to say it but the 20.0 is the only one I see your TV listed under.
Your welcome.
I'm not sure the 20.0 remote will work on a 322.
If it does, Ebays sell them for around $20
I would Try starting a thread, asking if the 20.0 remote will work with the 322.
You may get better results.
I'm not sure the 20.0 remote will work on a 322.
If it does, Ebays sell them for around $20
I would Try starting a thread, asking if the 20.0 remote will work with the 322.
You may get better results.
