VIP 622 and 811 receiver with 2 coax runs?

[iafirebuff]

Sorry for so many questions, this is my last! Anyway, Did I read right that I can run a VIP 622 dual tuners with 1 coax run (separtor in for tv1 and tv2), and also run an 811 from the 2nd port /coax run? That is, I can run 1 dual tuner and 1 single tuner from 2 coax runs from the lnb, without using any switches? If so, that will be perfect! I am prepping my site for my upgrade, so all the installer has to do is swap dishes and plug in the receiver. Thanks in advance!

 

[garys]

If your lnb on 110/119 is DishProPlus, yes (switch is built into the lnb). If legacy or DishPro, No, you will need a third line without seperator.

 

[iafirebuff]

I do not have it yet, but looking at the installation sheet online, it looks like the Dish 1000 has the DPP that has the switches built in.

 

[RandallA]

Yes a D1000 comes with a DPP Twin and you'll be able to run a 622 and a 811 with 2 cable runs. You'll need the separator for the 622.

 

[iafirebuff]

Great, Thanks! This will make it real easy then! The separator comes wiht the receiver I believe. This is going to simplify things alot!