So I have 2 USB cooling fans and a USB powered LED TV back light strip as part of my 722 setup. Problem is that the USB connector on the 722 is always on. With the fans constantly running and the TV backlight strip on 24/7 it is difficult to sleep in that room. I wish the 722 or my TV had a USB connector that would only come on when the TV is turned on, but neither one does.
I used a little 24 hour 120v mechanical timer for a while (the one with the little tabs you set on/off for each hour of the day), to only power the backlight and fans from 8am to12midnight, but it's impossible to know when someone will want to watch TV and I only want these devices on when the TV or 722 is on.
If anyone has suggestions, I will appreciate it very much!
I used a little 24 hour 120v mechanical timer for a while (the one with the little tabs you set on/off for each hour of the day), to only power the backlight and fans from 8am to12midnight, but it's impossible to know when someone will want to watch TV and I only want these devices on when the TV or 722 is on.
If anyone has suggestions, I will appreciate it very much!