This is a mobile optimized page that loads fast, if you want to load the real page, click this text.

Voltage Controlled Polarity and 4DTV

Status
Please reply by conversation.

equant

SatelliteGuys Pro
Original poster
Apr 23, 2007
265
0
Tucson, AZ
From an old thread...
Das Hammer said:
The 920 and 922 models are capable of voltage controlled polarity switching, which means if you get a standard LNB with 10750 LOF then you're good to go.
Click to expand...

I can not seem to get my 920 to do voltage controlled polarity switching. Under "Dish Settings" I've tried C-Band LNB and C-Band LNBF to no avail.

With "LNB" I can get horizontal but not vertical. With "LNBF" I get neither.

I'm using a dual output cband LNBF that works fine with a FTA receiver.

Any thoughts?

Thanks.
 
Status
Please reply by conversation.

Similar threads

H
galaxy 35 and 36
Replies
4
Views
1K
Houston Rockets
H
I killed my Super Jack II and bought a new Actuator ?????
Replies
6
Views
1K
Long Hair
ASC1 and new 36 inch Venture ball
Replies
23
Views
3K
FTA4PA
How to convert from 4DTV to FTA box out on the dish?
Replies
22
Views
4K
Texan61
I
FREE 14ft Prodelin C-band dish, mount, actuator, Seavy feed and LNB in So Cal
Replies
2
Views
2K
Houston Rockets
H
Menu
Log in
Register