Wire gauge for Ajak?
- Thread starter Greg Mueller
- Start date
- Latest activity Latest activity:
- Replies 32
- Views 2K
-
WELCOME TO THE NEW SERVER!
If you are seeing this you are on our new server WELCOME HOME!
While the new server is online Scott is still working on the backend including the cachine. But the site is usable while the work is being completes!
Thank you for your patience and again WELCOME HOME!
CLICK THE X IN THE TOP RIGHT CORNER OF THE BOX TO DISMISS THIS MESSAGE
- Status
Just want to confirm that the servo circuit (3+ shield) is a separate cable group from the sensor (2+ shield) cable group. Servo and sensor are not carried inside the same shield.
The shield bare drain wire is typically connected only on the controller and left open (unconnected) at the dish end.
The shield bare drain wire is typically connected only on the controller and left open (unconnected) at the dish end.
IF the Ajak is a reed switch and not an optical, then 2 wires + shield is correct. If it's an optical, convert it to reed switch.
AJAK did not use anything but a reed switch. The only optical one I know of is Titanium's and I built that sensor. 
But if you need an improved reed style sensor, I got em
But if you need an improved reed style sensor, I got em
YES Depends on how you count the drain wire
View attachment 131055 View attachment 131056 View attachment 131057
Magic Static do you sell this Ajak Super-Tracker? I would benefit from this improved reed sensor. Let me know how to buy if you have them for sale.
Correction - should have said that my 12 ft mesh dish would benefit as my motor only has 5 magnets and I use it for C band and Ku band
Click on the users name and it opens a window, conversation is one of the options
- Status
