Search results for query: *

Are you trying for Spanish language channels ? God bless Wyr

Some of the older Pansats would do skew on a CoRotor and operate a 22 khz switch . Do not know if yours will ? God bless Wyr

You HAVE to have The whole dish / motor assembly pointed due geographic south ( not magnetic south ) when the receiver commands the dish to reference point ( due south ) . If you do not have this right , then you will always have problems on some sats , often at the extreme ends of the...

43 degrees is pretty close to 45 degrees , which you can probably approximate by eyeball . Once you get a signal , you can tweak the skew . If you do not get it on one LNB , power down the receiver , switch to the other LNB , power up the receiver & try again . Or just blind...

A year or two ago & tried a C band feed horn & LNB on a 36" Ku band dish . Analog , a couple channels pretty strong , the rest went down in strength . I scrounged a 10' Dish and played with it for a while . I no longer use it , back to Ku . Wyr

I tried to read this , but with out punctuation , I gave up . :-( Wyr

This is a digital receiver ? Are you shooting for C band ? Ku band ? You can find a user manual at http://www.upfrontfotos.com/downloads/dsr4402x.pdf If you do not have one . Here is the chart for AMC 1 AMC 1 at...

You are going to need to use the GI receiver as master ( move the dish & control polarity ) and the DVB receiver as a slave . Since you have C & Ku band on the big dish , get two splitter , each has one port that passes DC ( the GI receiver ) , the other port does not pass DC ( the DVB...

Ku - AMC 4 channels , or maybe it was T5 . C band on a 90 CM dish , the 2 religious analog channels on G4 wyr

I am presently on 3 mb DSL . What speed is standard with the UVerse package ? Thanks

I think the newer versions of MyTheatre will do USALS ? Blind scan on a SkyStar 2 card ? Wyr

I have a HH100 & have uses it for a few years . Works fine . Wyr

So , AMC 6 is your true south ? If so , enter all the info in the receiver menues & then have the receiver tell the motor to go to AMC 6 . Be sure the scale on the motor - to - pole bracket is set for your latitude . Now , go out & tweek the dish for AMC 6 . Now ...

As several people have mentioned , it may be a conectivity problem or an IE problem . Go into Programs -> Accessaries Look for command prompt & click it You will get a DOS window on the screen type in : Ping http://www.satelliteguys.us ( or any other web...

Try a Diesque switch or a 22 khz switch ( if your receiver supports it ) to get both polarities ? Wyr

Are all your coax connectors OK and tight ? Wyr

I have been using MY for several years . D/l'ed the newest trial version of Proag . It does not seem to want to play well with my Nexus-S ? It finds signal & quality , but will not find any channels when I scan ? No big deal , just curious . Thanks , Wyr

I think MT 3.38 supports USALS ? Set it up in the menues . Go to your sat in the sat menue , select all the Trans Ponders and click scan . The first few TP's may come up empty , while the motor is moving the dish . When the dish is positioned , you should start getting...

Is this with or w/o the sat coax connected ? Check to see if the card is seated all the way in the slot . Check to see if anything on the card is shorting against anything else . Wyr

My old Fortec works fine with USALS . :-) Wyr

Make sure you do not have a short in the coax cable . Does it re-boot if you remove the sat coax cable ? Wyr

Do you have a collection of " ini " files ? If so , import the sat . The sat degrees for the ini files are from the other direction -> AMC 4 101 West will be 2590.ini -> 259 East . If you do not have the ini files , let us know and some one will be glad to email them to you . Wyr

Try re-loading the factory firmware ? Wyr

If you can only get one sat with a moter , w/o re-tweeking the dish , it sounds like the angles are wrong . Is the angle on the motor / pole bracket set to your latatude ? Is the dish and motor both pointing due south when you tell the motor to go to zero / reference position ...

Go to the scrap metal dealers & buy the pipe by the pound . Wyr