Search results for query: *

2/24 FYI: 101W 3984MHz, SR 3.978Msps, VPID 308, APID 256 "Flying_C0W Sat #1

Long Live AM Radio The only radio station I find useful in my SF Bay Area is KCBS 740AM. They broadcast news, traffic reports and no rap music. The station is stong in any environment over 100 miles away in all directions. FM stations fade and wane when travelling from pocket to pocket and...

stone1150 and johnnynobody, You guys hit it right on the head! The magnetic sensor wires in the actuator were not connected to the terminal block per diagram, so the wires to the DSR922 did not send the pulses as intended. All is well now with the bump increments much smaller and the arc...

I have authorized a Mot DSR922 through WebSams and have received Hits on the Trip Counter from G1-3. In the programming process every sat shows 5000 on the position counter and cannot be changed. I have not been able to pre-adjust the East-West arc limits even after a Master Reset. Every "bump"...

Unimesh 10' BUD I have aquired 2 versions of the 10' Unimesh, one with the quarter panel meshes secured by screws and one with the panels secured by plastic ribs. While I've successfully installed the "screwed" version with empirical methods, I would welcome any documentation associated with...

c/p from NASA Homepage(Please delete if posted previously): NASA Television Satellite Information NASA Television Moving to AMC 3 Satellite Jan. 16, 2010 NASA Television is moving to satellite AMC 3. The transition will take place January 16, 2010. Cable and satellite providers will...

This guy has been trying to sell this for months, and it's now free. His past posts show pics of an off-set composite CM mounted at roof level. FREE: Ku 10' Satellite Dish, 'transmit quality'

I want to win the new SG9120 Heavy Duty DiSEqC Motor & The WS9036 36 Inch Dish. Thanks for the contest.

I've removed 6 BUDs so far and before each disassembly took detailed photos just in case there is a reassembly problem. A step ladder works better when there is nothing to lean an extension ladder on. A wheel barrow will lighten the loads to the truck. In warm weather or climate a can of wasp...

The Hughesnet/Direcway 23 x 39" elliptical works well for FTA in NorCal. The stock LNB is linear and the transmit portion can be removed to lighten the arm. I prefer this dish, its electronics and heavy duty mount over the flimsy imports and am always on the lookout for freebies.

Wow, a satmeter with USID! The attached photo shows part of my dish farm: the DN Superdish for my sub, the DTV Slimline with DN FSS for 123 or 129W, and the Direcway minus the Xmtr for 97W. Much thanks to Brian and SatAV for the contests.

This is the correct battery: Lithium Battery Sanyo CR14250SE, with Solder Tabs 1/2AA-Size 3 Volts $9.95 free Shipping!

Scalar designs are normally fruits of RF Electronic Engineers, but random experimentation can yield useful results and are encouraged for the hobbyist. Walrus1957(?) an EE has posted extensively on homemade conical scalars for offset reflector applications.

It looks like a Paraclipse, size unknown: large satellite dish

I won that auction for $25 bidding during the last minute. It turns out the seller lives 7 houses from my parents' house, and he had tried to sell the stuff on craigslist a week earlier for $150. The package includes an assembled no-dent 10' Unimesh with a Cal Amp C-LNB, a Skytrack actuator, a...

OK, I found the post I was looking for. It's called Dish Boneyard Post6 http://www.satelliteguys.us/c-band-satellite-discussion/135830-big-dish-boneyard.html#post1378230 by Linuxman. From the pictures and descriptions he posted, it looks like I have one of each. Thanks, Linuxman.

Do you know the way to San Jose? There's a Paraclipse in fine looking condition: Dish

Thanks for the suggestion, Anole. I will PM Iceberg for the move.

I'm bumping up this post hoping for a reply. If this is against site rules, I am sorry. :confused:

I can't seem to find the past post that identified the different Chaparrals. If picture1 is a CorotorII, what model is picture2 w/Ku feed near the scalar? A CorotorI?

I'm near the Carneros wine region, earth station Intelsat Napa and 100 miles from Roseville.

I have power supplies from both the HTS8+ and 10+ open on the bench and plan to work on them when I have time, although there isn't much incentive to do so. Both designs are based on the Unitrode UC3842B Switching Voltage Regulator, so the circuitry closely follows the Application Note for the...

I need a motor for my CM1.0 composite. I hope the DG380 can be shimmed for the 2.38" mount. Thank you, Sadoun for the opportunity.

FYI: My 1.0M CM takes round struts and this CM-B1 LNB holder ($16.99) from prosat looks like a good fit:

I have experienced 60 summers, but some of the best ones were when my Golden Retriever was with me in my life adventures. He loved romping in fields and swimming in water, so almost every weekend we would head out into the Northern California wilderness, lakes or ocean shores to explore, swim...