Search results for query: *

count Steve Spurrier out. c&p AP at CNN/S.I.

get all 0's in South Carolina, hr20, with slimline 5 lnb set up... signal on on all the rest of the sats are @90's.... guess i'll have to wait to it's fully implented???

so nothing for us in the southeast? if so, which bird?

147.63 to be exact.... got well over a 100 on the signal.... receiver says 153 is the azimuth...wonder why....

ok...sometime it's better to start from scratch...i did away with with the switch, rg6, got a brand new dish, new rg6, and brand new lnb....just to make sure it was none of the above. MIND YOU, this is only to find 61.5. made a new mount, made sure mounting pole was plumb with a level. set...

anyone know if this is a sign of a bad lnb?

have a 622vip, dpp44, superdish @ 105, 110, 119.... seperate dish 500 with dual dpp lnb @ 61.5 going to dpp 44 ....i just lost 61.5 due to bad weather...couple of questions: what's the best transponder to find 61.5 with? i used to be able to just quickly nab it, now i can't? so i'm looking...

i tried 219 az, 45 elev, 63 skew...zinwell switch... still got nothing.... to quote charlie brown "ugggg" any more tips?

29212 Columbia, SC Hemi...the pic you have in your avatar...is the same dish i have... that's 5 lnb, as someone else mentioned in the thread? the reason i ask, is because the people i bought it from said it only picked up 101, 110, and 119... so i was using 3 lnb set up... thanks for any...

i'll give it a shot, thank you

it only has three lnbs...not the 5 at9 but it won't hurt to try to the settings for the 5lnb dish attatched is the pic of the dish...you might be right...i'm still rather a newb! thanks..keep the tips coming.

does anyone have the elevation, skew, and azimuth for the AU9 slimline (101, 110, 119 setup) .... for Columbia, SC? ...cause my hr20 has to be wrong with 40el, 55sk, and 231 az. i don't want to take down my old dish until i can the slimline working...but according to that 231 azimuth, i...

dtv subscriber, self installed... i came home tonight and turned on my hr20...no guide, odd transponders only, and all i get is a grey screen. directivo upstairs in my bedroom, all is fine. what y'all think, lnb and/or cabling problems? hopefully it's not the receiver. anyone ever have...

does it matter which coaxial gets screwed into the lnb? do i have to have both tuners plugged in, or for just setting this up could i just use one?

those numbers are straight off the HR20... are they wrong? also...what about the switch?

i have a HR20 dvr plus... self install. currently i'm just using the standard old oval dish (won't take it down until slimline install is complete), but with the purchase of the dvr plus, i got a DIRECTV AU9 Slimline with three lnbs for 101, 110, and 119. i also have a zinwell wb68 switch. i...

ok...since that didn't work, and only got odd transponders, i ordered an au-9 slimline (for 110, 119, 101) from sadoun.... any tips ...find 101 first for example, then tilt? also, on au-9, which is the 101 lnb... the center part of the lnb? i'm in columbia, sc. picture included.

i recently switched over to dtv from dish, and have zinwell switch, dtv hd-dvr, already have a my old superdish mounted, and have a spare 18" dtv dish i can point at 101. does anyone know if this will work, running 110 and 119 from superdish, and dtv 18" at 101, and run them to zinwell switch...

yeah, i called, and they're sending a 622.

ok...have it running to a dual dp lnb, straight to grounding block, then to receiver... when i do a switch test, it's still reboots.

i moved about 8 months ago... no dish installer nearby...i've been working a lot, and occasionally when i have free time, i searched for any installers. none where i moved. so i thought i'd do it myself. here's a) my equipment b) problem a) i have a 501, and a 921. dish 500, dp lnbs...

yes, i have a superdish 105... hooked up a new dpp44 (plan on eventually adding 61.5). 119 to 1st sat input, 110 to second, 105 to third. all running to 501 pvrs. power inserter hooked in between switch and 1st receiver. none of the receivers see the switch. 1st receiver does a check switch...

still can't get 105... which i have on port 1 of dp34. I have signal strength of 95 on 110 (port 2) and 95 on 119 (port 3). i couldn't get a signal until i went up to 46 degrees elevation, although the book says 43...i guess that could throw off 105? update: still nothing on 105...i'm...

thanks guys...i appreciate the encouragement...i will give it a go after work today and let ya know how it goes!

would someone mind pm'ing me the tvm site or a good broker for *choice?