Search results for query: *

  1. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    I though Eugene said a time or two that other firmware also could be placed on the HDVR3500 and never has expanded on that statement, At least give us a driver interface for chipset since the OS is opensource we could do the build for are self.
  2. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    So it can be used with sling box network remote, MicroHD works HDVR3500 did not till now.
  3. R

    Titanium Satellite CK1S

    Now this is New and would double any person satelite with a multi switch set up.
  4. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    hard and a mystery with out source code to descramble in short.
  5. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    As I see much like the European STB makers, You need to be a STB maker only and have the box use a third party OS. open ATV, open VIX, HDMU, open MIPS, meny others, Will keep flack off you. But if open source software is used you should ensure that they supply the code, Which in Europe is just...
  6. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    I have a prismcube-ruby and the XBMC is from the start part of the GUI, XBMC / linux is the over all OS for the system.
  7. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    I have noticed with the 1152 firmware that the GUI locks up not the video from the satellite. If I leave the channel selection screen on screen for a long time the unit will not respond to the remote control, Requiring a hard reset with back switch. Also a lot of the IPTV will not connect or has...
  8. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    Here is a question or request for the FTA mode, the IPTV loads XMLS files please request the capability to load .m3u files. Both files are some what the same but .m3u files are more common and supported.
  9. R

    OTHER manhatan 1997

    Hi mike can we get a update on the 1997
  10. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    I have the same invacom lnbf you will find if you test current that it draws a lot. Invacom, motor, and two diseqc and or 22khz is to much load, with out adding power from other source. The HH 120 is slow and I mean slow, about half the speed of other motors great motor but slow. As people have...
  11. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    I have a question sorry if it have been asked, how do I delete a channel. If I pick FTA the box always list G19, Astra 3A and I now have it on a single fixed disk not G19or astra 3A.
  12. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    This multi switch is great for use and is simple to use. Use Dual output lnbf on fixed dishes and a small TV station is born. It has antenna input to power an antenna amp. so inside you use a duplexer and put a cable to TV tuner OTA and satellite in one cable. I supply free Satellite and OTA to...
  13. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    I should say I use a Multi switch that supports diseqc control ( EMP centauri MS17/24 piu v10 ). It is diseqc 2.0 which is backwards compatible to diseqc 1.0. As all you have talked about is single output diseqc, to have a 24 output system that way would not be cost effective. the multi has it's...
  14. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    I use a multi switch 8 dishes and 24 outputs, The firmware is the trouble as microHD works and the Manhattan 1997 which use some of the same code works. Cband = 5150 2port lnbf, Kuband= 10750 2port lnbf. All of this was covered in an early post. Also I see a lot of the Apps in xbmc have errors...
  15. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    What I would like to know is when you pick glorystar or FTA, Will the box firmware pick all fta or just looking for G19. With the 1045 and 1107 firmware I have seen that my diseqc D is set wrong ( diseqc D 22khz on works correct for G16. But the firmware sets SES 2 diseqc D with 22khz on also...
  16. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    I must say that I am sorry to see titanium quit with HDVR3500, As he was the one I bought mine from. But we also see why all the drama, some one needs to sell a cheap plastic box that took no design, By those people who said this unit was a scam or POS. thank you to those who have shown why the...
  17. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    Some surge units based on what was used as a protector inside, and do to age it can work backwards with a high current draw. To limit voltage and would cause more heat
  18. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    You see I have no issue with XBMC or IPTV part at all. I watch 3 movies a week on XBMC maybe some buffering, As for IPTV i have have watched maybe 2 hours a week with no buffering. The box does get warm as it is my top of the stack box I use. When I first got the unit I did use the unit under...
  19. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    THAT IS THE POINT. I know that the switch is good cause i have 8 cables entering the house, ( 2 - amiko A2, 2 - amiko 8840, 2 - gigablue quad and 2 test lines 1 - Manhattan 1997, 1 - HDVR3500 replacing a microHD ). All other receiver work perfect but not the HDVR3500, My neighbours who also...
  20. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    You are right in that people need to vent, But if venting is with no point other then to say that the box is a POS over and over. What was the point, If buying this box brought hardship he did the right thing returning it and went with a longer running box that is more stable. As troubles and...
  21. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    quit trolling, He retuned his box so once again where is his drama BASHER. you have stated your troubles with the box and hopefully they will be fixed. that is what is need not the Girls drama.
  22. R

    A jig for proper positioning of replacement LNBF

    get a patent and sign me up for one, I change multi dishes and lnbf for FTA use. would make it far better and quicker.
  23. R

    GEOSATpro HDVR3500 - New DVBS2 STB - Photos and Initial Testing

    Basher, just a poor excuse for a person with to much time on there hands. SatelliteAV keep up the work no receiver has had one update fix all issues or most. But as the manhattan1997 maybe you are tiring to fix to much at one time. As I bought my receiver from titanium satellite. And never took...