Search results for query: *

Ota I had the same problem but I was about 15 miles away. I also had a pre amp and when I took it off, it cleared up my problem. It appeared that the pre amp was over driving the receiver.

Connections I have my DVI going to my TV and the S-Video going to my Sony recorder and then back into the tv, doing this allows me to watch in 420P if I want wich on a non HD channel looks great. It is the DVI and Component that don't work at the same time iether one or the other.

Dial Out I also have my old DSL filters still inline, but here is the kicker; when the phone line is unpledgged i get the nasty hook up you're phone line or you will be charged 5 bucks. When the phone line is hooked up I don't get that message, so it must be dialling out and connecting.

How often should the 522 dial out? I have Vonage service and I am able to look at my billing in real time and my 522 dials out constantly about 10 times an hour for 1 minute. It does this for 2 hours or so, stops for a while then starts doing it again. I am on a 500 minute plan w/Vonage and this...

Ota I did have a pre-amp and I was able to get all locals except for 54 which is chan 12. I disconnected the pre-amp and then I could get 54/12, then I removed it completely from the system and all signal strengths went up an additional 10 to 15 percent! I guess it was over driving the...

Antenna I got a Channel Master 3016 and all channels come in at around 85% signal strenth now.

I have an 811 and have got a 3010 Channel master outside antenna mounted on the chimney. I get signal strengths of 70's to 80's but the picture will freeze and come back and sometimes loose signal altogether. This morning I couldn't even get channel 12 at all. I bought another antenna a Channel...

I have an 811 and have got a 3010 Channel master outside antenna mounted on the chimney. I get signal strengths of 70's to 80's but the picture will freeze and come back and sometimes loose signal altogether. This morning I couldn't even get channel 12 at all. :confused: I bought another...

Sony I have mine cabled this way: S-video out to the Sony then Component video to my receiver and from there component video to the tv. Now I have to use the av for left and right audio but, the Sony will still let me output Digital formats with on board circuitry. Does you're recorder have a...

DVD Burners I have a Sony RDR GX300 and it has an option to out put in progressive or not to. When I select progressive I get 480p on both a 811 (non HD channels) and a 522. It will also record off of the HD channel, but outputs it 480p.

Monster All of my signal strengths remained the same, did not degrade at all and it only seems to be the one channel. I did check all connections at the switch and were all ok. I also ran it back normal and don't have the problem, it only happens when run through the monster. I might take it...

7.1 Onkyo 702, w/ Polk audio monitor 70 and surround monitor 40 w center cc2 it kicks but, especially after I got a sound meter and tuned it, which is a whole lot better than the setup mic it comes with.

Channels The Sony remote will not change channels on the 811, have not tried the 522.

DVR Sony Another thing with mine is that when I am not watching an HD channel I watch TV through the Sone on progressive mode and get 480p on my other channel's and wow what a smokin picture! :shocked

Monster When I got home I replaced one of the cables that I was unsure of but it did not correct the problem w/channel 109. But the picture is much clearer and the sound is clearer also, and as for signal strength, I am still at the same levels as before the Monster. :D

Monster HTS 3500 I also have a monster power reference center and am running an 811 and a 522 through it and it really cleaned up the picture a lot. But channel 109 on the 811 will go out and not come back unless I turn on the 522??, if I turn it back off the channel will go back out?? I am...

Sony RDR GX300 I recently bought a Sony RDR GX300 and hooked it up to my 811 through the S-Video output and it works great, very clear crisp recordings. Since I am using my DVI it turns off the Component video but not the S-video. I am still trying to get it to program the channel guide though.

I have recently bought and installed a Monster Reference Power Center HTS3500. I am running a 811 and a 522 through this unit along with all my theater equipment. It has really given me a much clearer picture even in 480 mode and even better in in 1080i HD :) There is one problem though that I...

I am having trouble getting the 119 on my super dish so I thought that I could use the old DTV dish just for 119 and the super for 105 and 110.

I was wondering if it is possible to use an old DTV dish to bring in satellite 119?

Yes I have a super dish, I have replaced the cables with 3 new ones from the dish to the switch. I think I am going to move the dish back to the original location and if 119 comes in then it is being blocked. When you do set up it say's that 119 needs an az. of 230 which I believe they mean the...

I have done that it never sees the 119 satellite, it says "port 3 dp-dual good conection, no signal" :confused:

I had to move my dish because of poor signal, how hard could it be right?? Well 105 and 110 come in great but I can't find 119 to save my a_ _ ! I have done everything and when I try to get a signal for 119 I get; "ECHO STAR locked on signal wrong satellite 110 west" :confused: Any help would be...

Changing channels and then back will fix it, it does on mine when it happens.

I have recieved my 811 about 2 weeks ago and it was hooked up with the composit cables that came with it, it had a great picture in SD and HD. I now have purchased a DVI cable and WOW what a picture in both SD and HD. Now as to the guide problem sometimes I get two days worth of programing and...