Search results for query: *

Just inherited Dish 2700 and 4900 receivers. Was wondering if these would work with my DishPro Plus Twin Lnb?

Okay, for the most part the following has been working since December: 110 & 61.5 connected via SW-21X output from SW-21X & 118 connected via SW-21 output from SW-21 connected to 622 receiver I just have one nagging problem in that the Detroit network Conus feeds (6459 to 6462) seem to...

Do I connect 110 and 118.7 to the SW-21X and the line out to one of the ports in the SW-21?

I'm using a modified setup with an 33" eliptical dish to get 110 and 118.7 combined via SW-21. Can I add 61.5 with the use of a SW-21X. And which sats would I connect with the SW-21X? I am using this setup on a 622 HD-PVR. I've had it with 129, so it isn't an option. Thanks to those who...

All the LNB's I'm using are legacy, and as I understand it I connect 110 and 119 via a SW21X, and then I connect the output from the SW21X to port 1 on the SW21 and then the output from the LNB pointed at 129 to port 2 on the SW21. Then I connect the output from my SW21 to my receiver. Can...

I should point out that we like to view certain network shows 3 hours early, thus the need for 129. :)

Thanks for all your contributions. I'm gonna go with the 30" Winegard, no matter what my wife says!!! :devil:

Anyone living in Blaine, Point Roberts or Bellingham (WA) that is using a 24" dish for 129°? I have a 622 HD-PVR and would hate any picture loss caused by signal dropouts since my wife records network shows such as Prison Break, Ugly Betty, Heroes, etc. I'm really not in a position to...

EKB? Sorry I'm not familiar with that. Could you elaborate please. :)

The reason I'm asking is so that I can just run the 1 RG6 cable into my house from the dish to my 622 and still make use of the DPP separator to split the signal for the 622's dual tuners. Also, is there a new version of the DPP that can pickup all 118.7 and 119 channels? Thanks in advance...

Just out of curiousity, what shows up when you do a CHECKSWITCH?

Thanks Iceberg!!! Thanks Iceberg!!! I knew you would know the answer. Cheers!

Hi all! I have an old Directv Phase III (3-Lnb) dish just laying around in my garage. I was wondering if I could use it along with a DP301 to get Echostar 148°W.

Please don't flame me. I haven't done this for a while. But can I make the above configuration work with a Dish 301.013? Thanks to those who reply.

Hi, unfortunately (because of tight quarters) I can only use my one Winegard 76cm. I formerly used it for FTA, but have since subscribed to DN and I am trying to retrofit it as a Dish1000 to use with my Dish942 HD-PVR. I've also got a lot of dish related junk lying around, so I might as well...

Will the Y-yoke twin lnb adapter work for an 18" (Dish300) dish? Will it be able to pull in 110 and 119? TIA :)

Does anyone have a pic of a BARE DishNet Twin LNB?

Iceberg: Thanks! That's good to know. One other note, I am having problems getting the 2nd satellite, whether it be 110 or 119, but only because I have mounted the LNB temporarily with double-sided tape. It's raining right now so I'm taking a break :). When I finally get to mounting my...

I am doing a modification and I am intending to remove the plastic casing off a DPP Twin LNB so that I can attach it to my Winegard 76cm dish. I've actually got it mounted already (with the case on) but just temporarily with industrial double-sided tape. The idea with removing the casing is...

Just hoping that I can use a DPP separator with my Invacom Quad Feed LNB so that I can run just the 1 RG6 cable from my satellite dish to both tuner inputs on my 942 receiver. Any advice would be greatly appreciated :)

Actually it's for a relative. Would it still be possible to combine the dishes if they had LEGACY LNB's? I will be using an Dish 811 HD Receiver.

1st dish with 2 LNB's pointed at 110 & 119 2nd dish with 1 LNB pointed at 121 3rd dish with 1 LNB pointed at 129 What switches do I need to combine all signals into 1 coax coming into the house? Thanks in advance to those who reply. :)