Search results for query: *

Im probably not going to put it up right away. I got 2- 1 meters up and a Primestar 84E which is 39 inches wide. It has the matching feedhorn. It does fine on 125 West. Not much to gain there in a replacment my opinion. But couldn't let it go in the dumpster. It just wasn't Christian. Thanks...

RimaNTSS... Mine is a little different. My dish is also deepest in the center. I measure 987mm OD and 78mm deep. F/d ratio should be .79. Double check me but I think that's right. bigg t....your welcome. Glad it helped you

Pretty sure this is what I got. http://www.gdsatcom.com/vsat/Technical_Docs/assembly_manuals/4096-661.pdf

Titanium...I don't have the original feedhorn. The installer said he had to take that back with him. I did see it. It was tall. with a large feedhorn. Had fins like a transmitter. RimaNTSS.... Mine also is 315 mm between the 4 mounting holes to the bracket. This dish is only 38 3/4 round.. I...

Thanks for the advice. You all think I should try to straighten that center LNB Bracket? It originally had a transmitter on it or should fabricate a bracket to hold LNB? Thanks Allen

Any Idea how to get those God awful decals off from it?

Got another dish yesterday from a Quicktrip. It was a dumpster save. It measures 38 3/4 and is round. Anyone wanna guess what it is? I think its a .98 Prodelin but not sure. The mount measures 2 1/2 which is bad since all I got here are all 2 3/8. Think I could make it work? Got 8 lock down...

Sorry been out of it a few days. It is an 84E. My brain doesnt work too well anymore. It does pretty good on 125W.

Thanks for the response.. I already have a 2076..actually I had a thought. I could leave the 89E up which is on 125w. and just play with the 2076... The 89E primestar is great for 125w. Thanks again

Anyone tried this? Im using an 89E Primestar right now for 125W but I got "this idea". I'm wondering how the PBS stations are coming in? Thanks

137W Feeds went down at exactly 11.00pm CST Jan 31. I was watching cutlerycorner when it happened. I am going to miss that show. I put the TV on sleep mode and it put me to sleep many a nights. Gray1

I went through several USB drives before I found one that will work. Adata S102 drive works very well in S9 even in High Definition. It is USB 3.0, but it is compatable with 2.0 that the S9 has. I use 16GB. Works well for me. Just my 2 cents. Gray1

Thank You. I have now downloaded my firmware. Gray

Well it's acting up again. Didnt take too long

Sounds like my problem. I got 76SQ and the next second 0SQ. I opened my S9 up and indeed have the W60-065 Polyfuse. Guess I better get a fuse. Its working fine right now. But I bet it acts up again. Thanks for your help. Gray

Congrats Gray Hair

I am having an odd problem with an Openbox S9. I have four dishes connected to the S9 with a DiSEqC switch. The receiver simply quits receiving a signal on all satellite and you get a "no signal". After you change channels with the remote a while it all comes back for a few minutes then it...

Those are nice dishes. I have one the same size. Only agravation is that they are heavy. But they are well made. DTN must had a lot of subscribers, cause there are a lot of those dishes (usually smaller though) here in Missouri. Gray1

My fondest memories was my brother in law taking me fishing. I was very young and was a lot of trouble but he took me every time he went. He has Alzheimer's disease now. He doesn't remember anymore, but I do. I always will. Gray1

Just as an update. I put a new LNB (Spitfire) on the Winegard. I can now get the NBC Mux. The signal is low but I do have a lock. Around 50 on the 30" dish. Thanks for the input. Gray1

Well tomorrow I will switch to a 1 meter dishes and see if that helps. Thanks guys

Skew is set at 10 RH. Im using one of Satellite AV old Bullet LNB's. That is the only dish that I have that is not in use right now. Thanks

Having some trouble with NBC Mux on 103W. Can get Hunnington Beach wil 71% SQ. Nothing on TP 11760 H 30000, TP 11840 H 30000, and TP 11881 H 30000. No NBC on blind scan either. Using Openbox S9, Winegard 2076. Anybody got any ideas or suggestions? Thanks Gray1

Dish is tweaked. If I move it up or down or side to side the signal falls off. Even with the dish a little off I should receive some signal..I got nothing. I am using and older Geosatpro CK1 LNBF. Dont know if that would make a difference. I am low on the horizion maybe signal is blocked...

Thanks for the reply..Yup I already tried that. 4160, 4165 and 4170 for 29125. Not a peep. It does not blindscan either. 65% on Alaskan..gotta be a reason somewhere. Thanks again