Search results for query: *

Does anybody know what satellite the stations that were on Galaxy 10r ku moved to after it failed. Thanks

Where can I find a guide for satellite location, plus channel listings. Thanks

I have a Coolsat 5000 and SG-2100, when you go from one satellite and scan and then program the channels, and then go to the next satellite. Do you have to go to Data Base and delete the previous satellite channels, or does the receiver take care of that? Thanks

I put RG6 Quad cable on my system. I have a Coolsat 5000 receiver and SG2100 motor. When I finished and connected the cable to the receiver, the front panel of the receiver just flickerd and would not go on. I believe the receiver was on when I did this. I have another Coolsat receiver which...

I just put new cable on my system RG6 Quad, at first my Coolsat receiver would not come on so I blamed the cable. But now its the SG 2100 motor not turning on. I have to receivers and tried both but still the motor will not work The motor is only 2 months old. I live in Michigan but it has`nt...

The receiver will come on when I take the cable off. I also have the BUD and when I hook up the KU from the BUD the receiver comes on. I ckecked cable for breaks but its whole. I have a 25 ft run from me pole, unless its the motor. Thanks

I put new cable on my system (RG6 QUAD) now when I hooked the cable to the receiver it wont go on. It tries to come on but it dos`nt. I have a Coolsat 5000 and SG 2100 motor. Did I purchase the wrong cable? Thanks

I have the SG-2100 motor, my dish does not have an arrow to mark the desired degree. I assume you use the nut and bolt to mark the degree, if so do you use the center of the bolt to mark the degree or the left side or right side? Thanks

I have a Coolsat 5000 receiver and a SG-2100 motor. I programed the first satellite using the USALS, and the dish will move to that satellite. After that I use the same procedure to program other satellites, and the dish will not move to those satellites. The window will come saying moving to...

I have the above LNBF that does both Linear and Circular, are these LNBF very reliable? Thanks

I have an DiSEqC 1. 2 motorized dish, I also have a INVACOM LNBF that does both linear and circular. What switch do I use between the LNBF and motor? Also do I need a DiSEqC switch between the incoming cable and my Coolsat 5000 receiver? Thanks

I have the SG-2100 motor and Dish B does`nt have an elevation setting, it has the same latitude setting as the motor. So if the motor latitude is 42 would`nt Dish B also have to be an latitude setting not elevation? Thanks

I motorized my 38 inch ku-dish. On the DiSEqC motor my latitude position is 42, it says my Dish B setting is 23. My Dish B has a latitude position of 10 to 80. Is 23 the correct settig for Dish B. I used the USALS then turned the dish to my strongest satellite but with no luck. Thanks