Search results for query: *

If the boresight one seems wider than a normal 12GHz tube, thats because there are more Feedhorns jammed together. Search for Ka Or Ka/Ku LNBF. All of the LNB are circular. This LNB places the downconverted Ka band outside the usual 900MHz-2200MHz I have one of the 5 LNBF models that I was...

45.4 N, 122.6W Coolsat 6000 0.06 FW Geosatpro 90cm JSC321 (Grey Tracker II clone) SG2100 H-H motor 11990 H 10799 SL: 80 SQ: 72 11995 V 4818 SL: 76 SQ: 69 12080 H 25635 SL: 87 SQ: 75 12089 V 3617 SL: 76 SQ: 69

Fizbi, are you using something for an AC-3 decoder? I know when I have the SonicVoom hooked up it doesn't respect the Left/Right Audio selection on the Coolsat 5000/6000 The analog RCA and RF channel 3/4 modulator built-in to the Coolsat respect the audio Left/Right preference but the digital...

I catch it twice a day, weekdays on 125W 12168 H 4444 Once at 4:30am PST and again at 12:30pm PST

Funny enough I have been working on the Census myself. Now understand I have to be really careful about how I answer anything census related. Two thing I want to make clear. 1. Census enumerators are not allowed to use the Internet to check on places (Google Earth and Maps and the like)...

Sorry about the delay. I had a similar experience with the NFHD I have it on hand since I was helping out in trying to return the box. Anyway, I got better results disconnecting the 8psk board and only watching the regular qpsk stuff. It was approx. a 5% boost to the quality meter The box...

I have my hands on a NFHD. Do you have the 8PSK board installed? (I realize it is a Turbo-coded 8PSK board but that's another discussion.) I get a large amount of loss using the 8PSK board since it is just looped-out and they provide a weak excuse of coax for a jumper I usually cannot get...

The Coolsat 5000 & 6000 need a straight serial cable to work.

*bleep* lost my post. Closed one tab too many. Sorry if I'm short, I just lost a decent amount of good info in a well written post. I saw you have a DishProPlus setup in a older thread of yours. That makes it hard to combine all 3 on one dish cleanly with what you have. If you are fighting...

I know you won't get 119 and 121 on the same dish without modification to the LNBF I could get 119/123/129 using a Geosatpro bullet LNBF. However 119 suffered as it usually was out of focus. In the picture attached, 119 is missing but it was on the right of the large feed horn jammed tightly...

97222 / Cloudy Night / 46F / 23:40 PST / 90cm (must be an odd night since SQ is up all across the arc) Peak on TP6 (11842) then scan these three transponders and provide Quality readings. TP6 - Frequency: 11842 Polarity: Horizontal Symbol Rate: 22000 - SQ 72-75 TP13 - Frequency: 11960...

Get on I-5 North Exit onto SR 503 and head east-bound Let some one else drive while you rubber-neck. About the time you lose sight of one you will see another within a minute the farther out you go. We didn't go past the Swift Reservoir though... If you strike out, I may be able to part with...

97222 / Coolsat 6000 / Geosatpro 90cm / Geosatpro GSL1u / Wx: Sunny and Dry TP6 - Frequency: 11842 Polarity: H SR: 22000 -SQ 70 TP11 - Frequency: 11929 Polarity: V SR: 22000 -SQ 72 TP13 - Frequency: 11960 Polarity: V SR: 22000 -SQ 70 (peaked) TP25 - Frequency: 12146 Polarity: V SR: 22000 -SQ 70...

There is a whole mess of them in SW Washington, north of Vancouver. I don't see any mention of where you're from, but that's what I know.

Still a bit off Brian Geosatpro 90cm, GSL1u, Coolsat 6000 Peaked on 11966 H for 69%, got 70% for 11842 H fine bumped motor 2 west to get 71-72% on 11842 H

Congrats and thanks for all of your work!

I'm showing it here in Oregon. Using a Geosatpro 90cm, a GSL1u on a SG2100 and the Coolsat 6000 with the 0.06 firmware: Tapping the "Move Fine" West 3 times in the Motor menu strengthens the Horizontal side. Makes a significant difference quality-wise 12152 H and 11842 H go up from 69% to 72%...

I've got 69-70% on the Coolsat 6000 right now and I'm watching it just fine here. Sounds like like a switch may be dying? The Coolsat switch I got with my 5000 died in a similar fashion. Would switch for part of a second then go to port 1.

When I was testing out the Geosatpro DVR-1100c circa Jan. 2009, I used a 24" Dish Network dish on 97W. The dish was warped at the time- not that I knew- but it still worked well enough on the brand-new Galaxy 19 to pull in a few transponders especially in better weather MHz Worldwide when it was...

iTunes is/was the most successful authorized digital distribution portal for music. Too many other differences and iTunes only comparable service, Season Passes/Subscriptions, are being passed up in favor of Hulu. (US-centric POV)

Your 30" is showing it's size, Jim. You've got some bleedover, there. 11815 V 2170 is on 103W Coolsat 6000 has 75%Q on the Direcway And I have no audio either. Bust out the Azbox or PC card on that 'cause I don't know what it is...

Transmit would mean whoever is uplinking the feed needs a call from Harpo's lawyers since it doesn't include "without permission"

O RLY? Then why are you burning cash, transmitting it anywhere?

Considering Rupert Murdoch has his Fox paws on both DirecTV and Sky TV (Worldwide) Also that Sky Latin America, D* and D* Latin America are under the same parent company "The DirecTV Group" Yeah, might have something to do with it...

Even the barker channels and the slates are scrambled! (At least the ones I have saved) EDIT: I take it back, did a Coolsat Auto Scan and only Ch. 101 is open.