Search results for query: *

Thanks Gabshere for your response ..This is the answer I got from a different forum: ========================================================== I wouldn't recommend to remove the film (kapton tape ?) because of : 1st - it RF transparent 2nd - it prevent get moisture inside, hence help against...

I installed a PAT 4106A as shown in pictures. Also refer to my set up at the bottom. I am having a bit of a problem to set it up any help would be much appreciated My questions: 1- Shall I take the yellow transparent paper cover shown in picture to install? 2- the cylinder inside LNB has to...

Can I watch DVB S FTA Channels directly on a DSR922?

Thanks for your response. I am using "ADL-RP3-CKu, PAT-8115, PAT-4106A"

76 views and no comments on my questions.... I guess I started looking for information on understanding polarity and ran into this nice information from Alan's Cband page: I post it because it is very interesting ... xxx.pacificsites.com/~alanjudd/skew.htm Also I found this other information...

My DS922 has an option to rotate polarity 90 degrees I have not used it so far bu I had to rotate my polarity to -90 degrees...What does it mean? would I be better off using the feature of rotate 90 degrees in main menu instead? could somebody explain please

I will not use neither A2 nor E2 as someone mentioned that it causes a download of Star Choice and will mess up my receiver. is this also correct? What to use in Satmex 6c .... M5, M6?

I am looking for designation in 4DTV MAP for Satmex 6c... Anybody has the latest MAP table for 4DTV.... I found Satmex 5C as M5 but do not find correct designation for Satmex 6C

I got it.. I went Options,6,4,3,3 and did it

I am trying to set up the skew on my DSR922 but after selecting my satellite on "Program satellites" menu I get a menu which adjusts the satellite position but "Do not get the lower part to adjust skew" as shown on attachment... All I get is the top part of the attached menu... no "AUTOPEAK...

I installed 5-3000MHz splitters X 2 and a diseqc and now scanning pretty good... started searching all channels. I will hook up another HD receiver Nfusion and see how it goes. Thanks for your response BJ

No a very goog move B.J. that was a good set of tries experimenting bu sometimes mess too much around and ther you have a mistake... I feel sorry about your wasted hour troubleshoot and problem caused. Good start anyways... But need a na answer on my questions! Anyone please:D

Thanks to all of you for your responses. In conclusion best to do is to use a HF splitter (better 2300 MHz) to slave a C band receiver with a Pansat. There are a few concerns after the discussion above: 1- I read in other posts the use of loop out to slave my Pansat, however I have the high...

Thanks Ice...that was quick:D

Hi I have a question on splitters to be used to slave my cband receiver to my pansat... I there a problem using a Splitter 5-3000 MHz or is absolutely necessary to use a 5-2400MHz or 5-2300MHz? does it make any difference?

Thanks for your responses.. how do I know ID number is good to sub and receive 4dtv?

I recently got a Motorola DSR 922 and i came without the Video Cipher module.. Do I need this module to watch Cband with free to air? or can I do it without it?

My appologies but i have to ask this question... All in all is it worth it to buy a DSR Motorola receiver to sub right now or soon we will have to shelve our receivers?

That is correct I only use analog receiver to move my dish... Let me ask if I use the IF (Loop) out from my main receiver to analog how would transponders and polarity work?

Using "IF OUT" to connect Cband analog receiver! That is then a good idea to use the "IF OUT" with the old analog C band receiver instead of using the diseqc and Hi freq spliters set up. Is that correct?

They will sell pretty quick... :D

I installed the pole for my 240cm solid dish and I want to make a clean arrangement for the cables comming from the FEED. Could anybody post a picture of a nice arrangement to install in my dish.:) Much appreciated

WOWW............ Bingo that was really quick. Mr. Shaun Kenny. that is it . Thanks phlatwound

Long time ago I downloaded a video of this gentleman with a lot of knowledge on Cband. Actually there were two or three videos one for setting or planting the dish, other one for aligning the dish and there was another one for final tweeks... I was wondering either any one knows where can I get...