Search results for query: *

thanks Thanks The dish is movable and when i took it down I took nothing apart but to take the actuator off The dish is only a year old bought it boxed off a dealer that went out of business its a 8 ft Unimesh, when checking the pole today for it being level Its just about dead on the off...

I just moved one of my Prime focus dishes from my one farm to another It was set on W5 before I took her down marked everything so set up would be easier The move of the new Dish is about 8 miles south west from its old location I just put the dish up after waiting for the pole to set the...

thanks That would be sweet but the Ortho run around $450 havent been able to find one used, over the last couple decades I have collected so much and this ADL I cant remember where i got it forgot i had it I have used similar ADL and they are great but such a hassle to get them set up...

I just came across some feedhorns I have had stashed in the barn the one I have a question about is the National ADL as its Brand new never been opened till now Its rather different it has the set scaler ring which cant be adjusted as many of them did inside the scaler ring there is the C...

I have two farms and at the one farm I have my kids set up with a 10ft Bud using the 4DTV receiver I hear now only W5 will be only left I just now set my pole here on this farm for my 8 FT BUD which the dish is all set just have to put her on the pole get my W5 aimed and my Clark Belt...

I think i could reset the servo motor to fix it but its so cold here i just froze my butt off this morning messing with the corotor

I did a 360 and the best quality is at 0V 80 H got close at one time but either hit -45 or 45 then had to go way off skew to get one or the other all evens out the same] guess i am stuck with 0-80 Thanks

I have one of my 7.5 dishes set up with a corotor using a pansat 3500 the settings on the pansat is V 45 H -45 my corotor is set up with the KU at 11 Oclock C at 5 Oclock I have to adjust the setting on the receiver at V 0 H 80 and has to be done with every Sat as i am using a acuator which...

has anyone herd of if any that the high speed data port on the dsr 922 has a purpose I read at one time they where going to roll out high speed internet acess with this receiver, but havent herd anything since I use wildblue as of now as i have only two options wildblue or Hughes net which...

Update fix I went into set up and it would not let me check c lnbf and every time i tried to high light it it would pass it up would not want to stop. so i checked c/ku lnbf and it worked. then i went back in and it let me high light and check c lnbf Not sure why it did this but for some...

Well got it running for some odd reason it did not want to stay on C Band lnbf as everytime i tried to high light it it would pass it up. so i went and set it to c/ku lnbf it then worked went back in after that and i was able to check the c lnbf again not sure what happened but the...

MY Feeds started getting Buggy on G3 a while a ago and went out I am now not getting anything on G3 and east That are horz vert is comming in but when it switches to Horz no Digicipher light and only getting analog in Vert trip counter went to 0 Could this be my lnbf ? or a dsr 922...

Thanks I am going to post a new topic as i just come to find out its not picking up the Horz feeds as only vert I am using a C Band LNBF Thanks

Its not a adjustment issue as i thought it was I am getting all my analog stations just not digicipher east of GO and also just noticed i also noticed my trip counter is at 0 I am getting the channles on GO and lost some of them on W% but not many and lost everything but analog east of GO...

maybe some one can help I all of a sudden lost my subscription channels and all digichiper channels the light wont even come on but its only from G3 east I am getting all the GO , W5 GO and west are ok but no digicipher east of GO not even a light on the dsr 922 it started like loseing...

After restoring a centerline feed horn I want to make sure its working right before i put in on the dish Can i test it by hooking it up to a receiver and switching polarities to make sure the servo is working right and my polarity are right I almost think i can but need to make sure...

That would be the Chapparral Corotor I have a few of the newer models on other dishes, but I havent installed this model as of yet The Corotors are very Stable and very dependable Thanks for the reply

more photos here is a side image

here are a couple photos of a old Chapperral Corotor throat and a CalAmp Centerline feed both are C/KU still have a few dead vistors in the corotor Thought i would post to get some input in which of the feeds would be better feeds I still have 2 almost new still in the box both are identical as...

Thanks Ill do that

I have what seems to be a older Drake KU LNB its a HEMT only other thing i can read off it is +15-24VDC output 950-1.450 and whats real faint is either NP 1.8 or NF 1.8 as the label is worn Its rather rectangular around 5 inches long pretty stout piece and well made for sure I know it will...

I have a zinwell ku lnb 10.7-11.7 lo 11.7-12.75 hi will this work with the dsr922 as the lnb says single universal Thanks

I appreciate all the replies The Centerline feed i have is a dual as a corortor the strange thing about this is the ku LNB sits offset on the back of the scaler which is designed as a offset but its a primefocus feed, Its a well designed unit and I guess it was made to compete with the Corotor...

Thanks I will do that as soon as my daughter brings my camera back The lnbs I have plenty of new c and ku . The feeds i am curious about I was surprised also when a Gentleman sold me the 6 ft perfect 10 new in box for $50 as he once had a sat shop and retired from it so he sold me alot of...

I have a Calamp cenrterline feed with the scaler ring it has only two rings then i have the Chaparral Corotar with the regular scale ring What would be the best one to use as they both are C/ku The Calamp they say is designed for improved rejection of TI The Calamp is Vintage as the...