22khz -ON- for universal
Couple of months ago, I was looking for Whitesprings on a
little 20" dish with a universal LNB.
I used a compass and some nearby subscription dishes to get an idea where to point.
My test-mast was off-plumb by 20º (see first picture!).
Using a $10 signal meter, I think I found the satellite on my second try, and peaked the reading.
Not sure how 61 signal and 59 quality ranks on the meter of the Satpros 500, but reception was fine.
So, pretty much nothing above is the proper way to go about getting the signal.
The one thing I did right, was to have the
22khz tone turned on while searching.
If this map is right, you have as
good a signal down in Florida, as I do in southern California.
Your bigger dish will have a little tighter beam width, so it'll be a bit more critical to aim.
PS: for dealing with the magnetic correction, I use any one of the many
sat finder programs which include that correction.
So, you never have to worry about whether you add or subtract the offset.
ref:
White Springs - Engineering