Social Feed
Hello, I am new to the forum here and this is only my second post, so please bear with me, and mods feel free to move this if there is a better area for it.
A few years ago a friend of mine had set me up with a BUD that looks to be in near perfect condition, the unit was fully functional at the time of removal. I have the polar mount and all the original cabling (very professional job on the install, everything was in PVC pipe and no problem to remove). I have only a few problems, and that is: 1. I don't even know how to measure this dish, and 2. I don't know what the dish is capable of.
To address question #1 I measured the dish from one rim to the opposite side (not following the shape of the dish, but keeping the tape tight straight across) and the dish measured 90". I know that there has got to be a correct way to measure this dish and identify it.
To address question #2 I know that the dish was only used for C band reception at the previous owners installation, but I would like to find out if it is capable of receiving Ku band as well (it only has a C band LNB on it at the moment). I read a very informative page about BUD installation and it touched on this discussion and had mentioned that you could tell if a metal mesh dish was C or C, C/Ku by the size of the mesh. The only thing is it didn't mention how you could tell the difference, only that you could.
Now if the dish is only capable of C band reception, I am ok with that as I was already getting my 75cm Channel Master (recycled primestar dish) ready for a motor. Any help would greatly be appreciated. I am happy to have a community of other satellite hobbyists around to help encourage and guide me through this.
Thanks in advance,
John
I included an attachment with a pic of the dish, it is the one on the right the one on the left had a rather large tree limb drop on it, and bent the edge in and I don't know if it can be repaired.
A few years ago a friend of mine had set me up with a BUD that looks to be in near perfect condition, the unit was fully functional at the time of removal. I have the polar mount and all the original cabling (very professional job on the install, everything was in PVC pipe and no problem to remove). I have only a few problems, and that is: 1. I don't even know how to measure this dish, and 2. I don't know what the dish is capable of.
To address question #1 I measured the dish from one rim to the opposite side (not following the shape of the dish, but keeping the tape tight straight across) and the dish measured 90". I know that there has got to be a correct way to measure this dish and identify it.
To address question #2 I know that the dish was only used for C band reception at the previous owners installation, but I would like to find out if it is capable of receiving Ku band as well (it only has a C band LNB on it at the moment). I read a very informative page about BUD installation and it touched on this discussion and had mentioned that you could tell if a metal mesh dish was C or C, C/Ku by the size of the mesh. The only thing is it didn't mention how you could tell the difference, only that you could.
Now if the dish is only capable of C band reception, I am ok with that as I was already getting my 75cm Channel Master (recycled primestar dish) ready for a motor. Any help would greatly be appreciated. I am happy to have a community of other satellite hobbyists around to help encourage and guide me through this.
Thanks in advance,
John
I included an attachment with a pic of the dish, it is the one on the right the one on the left had a rather large tree limb drop on it, and bent the edge in and I don't know if it can be repaired.
21 Replies
·
4515 views
Holy Cow!
Someone relatively close to me. You must be somewhere between Warrenton and Montgomery City.
That's cool! We'll have to get together sometime, and if you need help, I could probably be persuaded.
Fred
Staff member
HERE TO HELP YOU!
Cutting Edge
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68531 Replies
·
2672927 views
Supporting Founder
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
149 Replies
·
1801 views
Was thinking same thing. It should be a good week for sec shorts and roll callThey ought to have fun with this…
My year was almost up and we got the new bill for a year of service for $ 360.00 insane sat radio is becoming like cable!!! i logged into my acct and hopped onto chat and told the rep that i wanted to cancel. she understood my concern and went quiet for a few minutes. i figured that she was canceling my service. she comes back and said that she seen that i have been a sub since 07 and then offers me the same package for a year for 120.00 with taxes and fee's!!! i grabbed it. after almost having a stroke 
239 Replies
·
11057 views
S
Don't you mean phone sex operators
Is That why you keep SXM ???Don't you mean phone sex operators
Mrs. Foxbat reminded me it's that time of the year to do the Cancel Tango
The A.I. agent appears to be better than in the past. It got to the acceptable price quicker than previous years, no human operator involved. $5/mo and I still have over $50 in SiriusXM credit from my FordPartner benefits.
The A.I. agent appears to be better than in the past. It got to the acceptable price quicker than previous years, no human operator involved. $5/mo and I still have over $50 in SiriusXM credit from my FordPartner benefits.
I forgot you can pay that with Ford Pass points, I won't be due again till Feb, but I'll have to remember to try it ... Not sure what needs to be done, but I do have a substantial amount of points currently.Mrs. Foxbat reminded me it's that time of the year to do the Cancel Tango
The A.I. agent appears to be better than in the past. It got to the acceptable price quicker than previous years, no human operator involved. $5/mo and I still have over $50 in SiriusXM credit from my FordPartner benefits.
S
.
when i say cancel. they give the moon and stars!!! iv'e gotten free radios and a free month once since it was my bdayIs That why you keep SXM ???
.
Pub Member / Supporter
America’s Fastest-Growing EV State Isn’t California—Not by a Long Shot
New data shows electric vehicle adoption is increasingly driven by state policies, electricity prices and charging access—not federal incentives
www.autoweek.com
The number-one US state for EV growth, according to the June 22 Yardi report?
Oklahoma.
It has no ZEV mandates and "minimal" incentives, Yardi says, but also has cheap electricity, high multi-car household rates (so, for example, a non-Lightning Ford F-150 pulls their trailers), and a consumer base willing to switch.
113 Replies
·
925 views
tomwellborn3rd (@wellborn.net)
This author has chosen to make their posts visible only to people who are signed in.
bsky.app
Never realized that Tesla is losing to BYD at manufacturing too, which IMO is Tesla's biggest accomplishment and area of innovation. Nice writeup about the state of play and how we got here though. I have no faith that we're moving any productive direction though sadly, most changes and efforts feel reactionary rather than rooted in making use of the time being bought by tariffs, with few exceptions.
So: how are the cars so cheap, and what is being cut to get there? The best public accounting comes from the Rhodium Group, which compared BYD, Geely, and Leapmotor against Tesla's Chinese operation, a fair comparison because it removes labor costs and shipping from the equation entirely. Their estimate is that BYD builds a car for about $4,700 less than Tesla builds a Model 3 in Shanghai, roughly 15 percent of the Model 3's price. The breakdown is the interesting part. Direct government grants account for about $292 per vehicle, which is 5 percent of the gap. The biggest single factor is vertical integration: BYD makes about 80 percent of its top-tier components in-house, against 37 percent for Tesla, and that eliminates roughly $2,369 per vehicle in supplier markups. Lower overhead, meaning cheaper engineering talent and administrative cost spread across enormous volume, accounts for another $1,719. And BYD pays its suppliers on 155-day terms, against Tesla's 60, which is worth about $214 per car in float. When people say the Chinese advantage is subsidies, the per-vehicle number says otherwise. When people say it is slave wages, the Tesla Shanghai comparison says otherwise too. The advantage is mostly that BYD decided, twenty years ago, to make its own batteries, its own motors, its own power electronics, and its own semiconductors, and Western automakers decided the opposite.
US EV sales are rising again. Here’s why the recovery is set to last.
Even though sales tanked last year after the end of federal incentives, the American EV sector is on the mend as drivers face sky-high gasoline prices.
www.canarymedia.com
Staff member
HERE TO HELP YOU!
Stumbled across this ... http://www.gaspricewatch.com/USGas_ZipSearch.asp
I found no local prices, although it did show stations at my location...
Added these to this post...
USA National Gas Temperature Map
State By State Gasoline Taxes
Gas Buddy
Ethanol Free Stations
I found no local prices, although it did show stations at my location...
Added these to this post...
USA National Gas Temperature Map
State By State Gasoline Taxes
Gas Buddy
Ethanol Free Stations
5553 Replies
·
460684 views
Here in Indiana, the difference between Regular and Premium is usually a dollar, but some charge even more:
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/watch?v=beTFfPz10OI
Direct YouTube Link - Club TWiT: Media Club #3 - Best of Adult Animation: Futurama, Rick and Morty, and Simpsons Classics
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/watch?v=beTFfPz10OI
Direct YouTube Link - Club TWiT: Media Club #3 - Best of Adult Animation: Futurama, Rick and Morty, and Simpsons Classics
TWIT's Website
TWIT Live Feed
0 Replies
·
7 views
Why are ViP922s So rare? like its crazy how ebay has none, i checked everywhere, also, i got a ViP222k now, which is actually activated!
4 Replies
·
101 views
Staff member
HERE TO HELP YOU!
6 Replies
·
66 views
Booredatwork.com
Time for another AWESOME video from BoredAtWork!
View: https://www.youtube.com/shorts/apQ9G9Nr9so
Direct YouTube Link - Alexa Tablet 12 Pro Unboxing!
Booredatwork.com Website
Booredatwork on Facebook
View: https://www.youtube.com/shorts/apQ9G9Nr9so
Direct YouTube Link - Alexa Tablet 12 Pro Unboxing!
Booredatwork.com Website
Booredatwork on Facebook
0 Replies
·
5 views