Social Feed

Airtechjr

Last reply Jan 27, 2008 · posted in DISH Network Support Forum

1 dish 4 receivers

I have a Dish 1000 with 3 LNB ProPlus and I would like to attach 4 separate receivers. Can I add a switch, or must I continue to use 3 separate dishes. I have a 622 and 3 single tuners.

20 Replies · 3594 views

Load Replies (20) Reply Legacy View

garys

Jan 24, 2008

vegassatellite said:
It was implied when I said "Otherwise".

Person not familar with equipment would not know this.

Airtechjr

Jan 24, 2008

Do I need to attach 3 cables to the lnb's? Then to the DPP44? Also does this work with the 622?

vegassatellite

Jan 24, 2008

garys said:
Person not familar with equipment would not know this.

Re-read exactly what I wrote. If it could be construed any other way, then the reader would be to blame for not having good comprehension.

This is why Windows writes their instruction manuals at an 8th grade comprehension level.

garys

Jan 24, 2008

vegassatellite said:
Re-read exactly what I wrote. If it could be construed any other way, then the reader would be to blame for not having good comprehension.

This is why Windows writes their instruction manuals at an 8th grade comprehension level.

I reread this three times, "old school" is really not specific to new people not familiar with Dish equipment.

vegassatellite

Jan 24, 2008

garys said:
I reread this three times, "old school" is really not specific to new people not familiar with Dish equipment.

"old school" could be omitted and the context would stay the same. Here it is again with it omitted:

Otherwise you'll need to replace them or buy an SW64 switch.

The word "Otherwise" reflects what he will have to do as an alternative if his LNBs aren't DP, while "or" reflects what he will have to do if he doesn't replace non- DP LNBs.

Here is another way to read the same message:

"Just make sure they are labeled 'DP' or 'DishPro' on them before getting a DP34 or DPP44 switch, otherwise you'll need to replace them."

The phrase following the "or" should be inferred in accordance with context clues from the first sentence and the first half of the second sentence to indicate that if the LNBs were not DP then he could follow the suggestion indicated in the phrase following the word "or". In fact, the second half of that sentence is explained as an alternative to the previous command of buying a DP34 or DPP44. It is an alternative command stating he could get an sw64 if the first conditions were not met, i.e., the LNBs were not DP. The word "or" defines the phrase as an alternative action.

garys

Jan 25, 2008

vegassatellite said:
"old school" could be omitted and the context would stay the same. Here it is again with it omitted:

Otherwise you'll need to replace them or buy an SW64 switch.

The word "Otherwise" reflects what he will have to do as an alternative if his LNBs aren't DP, while "or" reflects what he will have to do if he doesn't replace non- DP LNBs.

Here is another way to read the same message:

"Just make sure they are labeled 'DP' or 'DishPro' on them before getting a DP34 or DPP44 switch, otherwise you'll need to replace them."

The phrase following the "or" should be inferred in accordance with context clues from the first sentence and the first half of the second sentence to indicate that if the LNBs were not DP then he could follow the suggestion indicated in the phrase following the word "or". In fact, the second half of that sentence is explained as an alternative to the previous command of buying a DP34 or DPP44. It is an alternative command stating he could get an sw64 if the first conditions were not met, i.e., the LNBs were not DP. The word "or" defines the phrase as an alternative action.

My point is that if the OP does not know about switches, you cannot expect him to know about lnb's. Using the word "or" usually means choice of two, where as there are three types depending on the situation especially when what may be the third type, while giving the approapriate switch is then passed off as "old school" instead of what installers, retailers and anyone with any type of knowledge knows the model type is "legacy". Sounds like (at least to me, who is not all that technical) it had to be spelled out otherwise the OP has more research to do when person offering info does not give him all of it.

vegassatellite

Jan 25, 2008

garys said:
My point is that if the OP does not know about switches, you cannot expect him to know about lnb's. Using the word "or" usually means choice of two, where as there are three types depending on the situation especially when what may be the third type, while giving the approapriate switch is then passed off as "old school" instead of what installers, retailers and anyone with any type of knowledge knows the model type is "legacy". Sounds like (at least to me, who is not all that technical) it had to be spelled out otherwise the OP has more research to do when person offering info does not give him all of it.

That's why I explained what he would need to look for on the LNB to determine the type. He says he has 3 of them on his dish which leads me to assume they are either DishPro or Legacy. I'm not aware of a DPP single or dual, are you?

I'm sorry I didn't write it at an elementary school level of comprehension.

garys

Jan 25, 2008

vegassatellite said:
That's why I explained what he would need to look for on the LNB to determine the type. He says he has 3 of them on his dish which leads me to assume they are either DishPro or Legacy. I'm not aware of a DPP single or dual, are you?

I'm sorry I didn't write it at an elementary school level of comprehension.

Dish 1000's do not come with Legacy lnb's and never have. OP have very new equipment, you cannot expect person to know about older equipment.

vegassatellite

Jan 26, 2008

garys said:
Dish 1000's do not come with Legacy lnb's and never have. OP have very new equipment, you cannot expect person to know about older equipment.

I didn't go back and re-read the original post. You'll notice I just replied to his post in #3 where he said he has three LNBs.

For the record, I have seen 1000s with legacy. In fact, the last one was a 1000.2 with a "W" bracket and the person intentionally put in legacy on an sw64 because in his opinion, legacy is more responsive than DishPro. I can't argue with him since band-translation technology requires the additional steps of the receiver telling the DPP switch which satellites/polarities to stick on which band.

If he has the 1000.2 with the integrated triple LNB with built-in switch, then the only switch he can add is the DPP44 without changing out LNBs and the bracket itself. DISH states that a DP34 is not compatible with the Triple LNB. (Probably a current draw issue)

garys

Jan 26, 2008

vegassatellite said:
I didn't go back and re-read the original post. You'll notice I just replied to his post in #3 where he said he has three LNBs.

For the record, I have seen 1000s with legacy. In fact, the last one was a 1000.2 with a "W" bracket and the person intentionally put in legacy on an sw64 because in his opinion, legacy is more responsive than DishPro. I can't argue with him since band-translation technology requires the additional steps of the receiver telling the DPP switch which satellites/polarities to stick on which band.

If he has the 1000.2 with the integrated triple LNB with built-in switch, then the only switch he can add is the DPP44 without changing out LNBs and the bracket itself. DISH states that a DP34 is not compatible with the Triple LNB. (Probably a current draw issue)

As the OP was asking about switches you have to take his install as new and had someone else put it up and not the OP (he only has 5 posts since this past October so far, would back up my assumption). That being the case, there should have been no legacy lnb's (unless the installer tries to be sneaky and use older equipment and getting paid for new stuff by the customer and/or Dish). The instances you list seem like self-installs and those people used equipment they already owned instead of buying all new equipment.

oljim

Jan 26, 2008

Just put up a dish 500 with twin, 129 is needed for the 622 only

vegassatellite

Jan 26, 2008

garys said:
As the OP was asking about switches you have to take his install as new and had someone else put it up and not the OP (he only has 5 posts since this past October so far, would back up my assumption). That being the case, there should have been no legacy lnb's (unless the installer tries to be sneaky and use older equipment and getting paid for new stuff by the customer and/or Dish). The instances you list seem like self-installs and those people used equipment they already owned instead of buying all new equipment.

Well, the OP did state "or must I continue to use 3 dishes." With the other contradictory statements such as "Dish 1000 with 3 LNB ProPlus", etc. We can't make any assumptions in light of some of the contradictions the OP has made in identifying his current configuration.

garys

Jan 27, 2008

vegassatellite said:
Well, the OP did state "or must I continue to use 3 dishes." With the other contradictory statements such as "Dish 1000 with 3 LNB ProPlus", etc. We can't make any assumptions in light of some of the contradictions the OP has made in identifying his current configuration.

But if you take it that the OP can read and "Dish 1000 with 3 LNB ProPlus" is right, you get the idea of what he does not know. The rest of the contradictory statements come as someone who would not know about setting up, lnb types, switches, DPP Separators or additional dishes and coax runs as someone who thinks the fix is a lot harder than it actually is.

If you take in the OP #3 post, OP has one dish with 3 lnb's on it, not three single lnb dishes.

garys

Jan 27, 2008

Airtechjr said:
Do I need to attach 3 cables to the lnb's? Then to the DPP44? Also does this work with the 622?

Attach 119 into #1, 110 into #2 and 129 into #3, #4 remains empty. Hook the output form #1 to the 622 using a DPP Separator (it looks like a splitter and should of came with the receiver when you first got it). This may make using the power inserter unnecessary (someone whill probably chime in on this to be sure). If it turns out you need to use the inserter, it would go on this line. Each of the other three single tuner receivers get one line from the other three outputs from the DPP22 switch.

View all replies (20)

dishstaller

Pub Member / Supporter Lifetime Supporter

Last reply Today at 3:47 AM · posted in The Chit Chat Club

We're less than 4 weeks away from Voyager 1 reaching a distance of one light day from Earth

I've always been super interested in things space related so this is a pretty cool event coming up. Nov 18, 2026 early in the morning, Voyager 1 will reach the distance of one full light day from Earth. Took almost 50 yrs. I was 13 when it launched.

View: https://www.youtube.com/shorts/gjHK3clOwIw?feature=share

2 Replies · 57 views

Load Replies (2) Reply Legacy View

Reactions: Foxbat, FTA4PA, Bobby and 2 others

Foxbat

Today at 12:57 AM

So, 1/1596th the way to Alpha Centauri (if it were headed that way). 79,800 years to go…

Reactions: Bobby and Keith Brannen

Bruce

Today at 3:47 AM

Foxbat said:
So, 1/1596th the way to Alpha Centauri (if it were headed that way). 79,800 years to go…

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply Today at 2:37 AM · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne

Get it?

An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....

68589 Replies · 2676826 views

Load Replies (68589) Reply Legacy View

Reactions: c-spand

sdfntx

Yesterday at 4:52 PM

Devil in Her Heart - The Beatles

long_time_Dish

Yesterday at 7:21 PM

Take Me To Heart - Quarterflash

ClarkGable

Yesterday at 10:03 PM

Take Me To The River - Talking Heads

long_time_Dish

Yesterday at 10:21 PM

Don't Take Me Alive - Steely Dan

hwkn

Today at 2:37 AM

TAKE On ME-A-Ha

View all replies (68589)

Bobby

Supporting Founder Lifetime Supporter

Last reply Today at 12:42 AM · posted in DISH Network Support Forum

4K Events Discussion Thread

This thread is a place to discuss the 4K events that appear on channel 540. We are getting, at this point, one college football game a week. Let's hope there is more coming.

1936 Replies · 299640 views

Load Replies (1936) Reply Legacy View

Reactions: Rixos, DWS44 and charlesrshell

Foxbat

Oct 15, 2026

Which is what is interesting, I see the 4KFox channel on 148-01 but we're not subscribed to our Locals. So why it's coming in is puzzling. I thought that maybe it was a perk for Dish subscribers for the MLB Postseason.

I set a Timer for the Indiana - Ohio State game on Saturday. I'll take advantage of it while I can.

Reactions: long_time_Dish, slow_poke_pete and charlesrshell

Foxbat

Yesterday at 4:48 PM

Foxbat said:
I set a Timer for the Indiana - Ohio State game on Saturday. I'll take advantage of it while I can.

Even though it didn't work out for the Hoosiers, this event recorded and I was able to watch it in full 4K HDR.

Bobby said:
MLB, Rays at Brewers, Friday 10-23, 5PM PDT, Channel 148-01.

Timer is set to Record the Series. Thanks, Bobby!

Reactions: long_time_Dish, charlesrshell and Bobby

long_time_Dish

Yesterday at 7:25 PM

No NASCAR in 4K on Sunday? Bummer...

Reactions: charlesrshell

Jim5506

Today at 12:13 AM

long_time_Dish said:
No NASCAR in 4K on Sunday? Bummer...

It's on Prime.

long_time_Dish

Today at 12:20 AM

Jim5506 said:
It's on Prime.

Ah, ok, thanks!

Foxbat

Today at 12:42 AM

The World Series Game 1 quality was excellent, the Dolby Surround put us in the seats. Thanks, Dish!

View all replies (1936)

jcrandall

Staff member HERE TO HELP YOU!

Last reply Today at 12:07 AM · posted in DIRECTV Programming Forum

Channels on DIRECTV Satellite and not on Stream/Internet

So...DirecTV advertises the Choice package with 95+ bonus channels for Satellite customers. You don't want 90+ of the 95...

Excluding PPV, premium networks, infomercial, shopping, religion, and non-English programming, there are 7 channels on satellite that are not on streaming:
NFL Network, MavTV, FE TV, Free Speech, NASA, INSP, and Pursuit. I'm pretty sure a couple of those are public interest that they have to carry to meet an FCC quota on satellite.

I hope they get called out for this advertising because that is ridiculous. One big network, NFL, will probably get added to streaming when their next agreement comes up, and the rest are likely very low viewership.

What about streaming, what do you get extra with the Choice package that isn't on Satellite:
Two stations - one of which is an internet TV - Fox Weather, and Heros & Icons (a diginet). Nothing special here to look at either.

If they cleaned up a couple of their agreements, added a few public interest stations to streaming, they could probably have their lineups match. It's close now, if you take out all the garbage on satellite that they earn money on. If they can sell infomercials on satellite, why can't they on streaming, seems like a miss. A bigger miss, including those stations in the "bonus channels just for satellite customers." Pretty sad marketing right there.

Attached is a comparison sheet of satellite vs streaming for the three main packages if anyone is interested.

MOD EDIT: See Post #3 for an up to date list of what channels are available on sat but not on streaming/internet, see Post #21 for an up to date list of what's available in the app for streaming customers, but not for sat customers.

DirecTV Sat vs Stream.pdf 46 KB

241 Replies · 31738 views

Load Replies (241) Reply Legacy View

Reactions: DS0816, Tecnicoloco and Jimbo

mario315

Oct 14, 2026

Well, this is awkward. Today the Miami Heat announced that their games in West Palm Beach this season will be aired on WTCN Channel 43, the Sinclair independent... and the station which DTV Stream downgraded from HD to SD a few weeks ago. Makes you wonder if the Heat is aware of this.

I did find the WTCN Chief Engineer (Bill Macbeth) and he said he knew nothing of what DTV Stream had done. Will look into it and get back to me.

harshness

Oct 15, 2026

One might get the impression that what DIRECTV does, or doesn't, is becoming far less consequential than it used to be.

mario315

Yesterday at 11:55 PM

harshness said:
One might get the impression that what DIRECTV does, or doesn't, is becoming far less consequential than it used to be.

KyL416

Today at 12:00 AM

WPLG/10 Miami is now available to stream customers

The CW stations WCWW/25 South Bend and WBKP/5 Marquette are testing on the stream server

Last week they also added a bunch of CW stations that are still not available to sat customers:
WETM-DT/19 Elmira
WJET-DT/25 Erie
KLFY-DT/11 Lafayette LA
KARD-DT/15 Monroe
WVBT-DT/44 Norfolk
WTWO-DT/3 Terre Haute
WFXV-DT/34 Utica
KFDX-DT/4 Wichita Falls

Reactions: mario315

mario315

Today at 12:07 AM

Well, that was fast ! DTV Stream brought back WTCN's HD signal today.

I have to assume the station signing up a week ago as the Miami Heat affiliate here (to carry their games) did the trick. NBA magic !!!

Or the station engineer took care of the problem after hearing about it.

Reactions: KyL416

View all replies (241)

niembre

Last reply Yesterday at 11:48 PM · posted in DISH Network Support Forum

OTA no working after Update

My OTA is not working anymore. This started after the latest update. I have the OTA dongle with a OTA antenna that I've been using for years. My hopper does not recognize the dongle anymore and when I go to the OTA setting, it has a screen that says to plug a dongle into the USB. I tried unplugging and plugging back, in the same usb port and other ports. The Hopper does not recognize it. Anyone have same issue?

203 Replies · 5402 views

Load Replies (203) Reply Legacy View

Reactions: charlesrshell

Briant73

Wednesday at 9:19 PM

Anyone heard any updates on this, I'm still having the issue so thought I'd check in.

Reactions: charlesrshell

Almighty1

Wednesday at 9:48 PM

Briant73 said:
Anyone heard any updates on this, I'm still having the issue so thought I'd check in.

No updates but if you can get DISH Technical Operations to roll you back to H710 or earlier even though H708 would be best because it also eliminates another problem like in this comment, you will also no longer have the problem as long as you don't update manually or forced to any new version until the problem is fixed as the problem started in H711 and still exist in H712 and H713.

https://www.satelliteguys.us/xen/th...ftware-version-713-is-out.423921/post-5108817

Reactions: charlesrshell

dishstaller

Wednesday at 9:57 PM

Installed an off-air antenna a couple days ago for a customer who had just cancelled his Dish service. He had a dual off-air adapter and gave it to me. Cool. I'll keep it on the truck....might come in handy. Got to admit I don't watch anything as far as live tv goes anymore. Even if we have severe weather, our local channels will have a live feed on Youtube.

Reactions: navychop and charlesrshell

navychop

Wednesday at 11:21 PM

In other news, it was announced that the software fix for the two tin cans and a string will not be forthcoming. A hardware fix is required. However, that fix will let you receive stations from a gazillion miles away.

Truck roll charges may apply. Two year commitment required.

Reactions: Almighty1, Bobby, dishstaller and 1 other person

brittanygarden

Thursday at 6:24 PM

Hi all. If you were using a single tuner USB OTA adapter that is no longer working, please PM me. Thanks.

Reactions: MikeD-C05, Foxbat, Almighty1 and 1 other person

Jim5506

Yesterday at 11:48 PM

brittanygarden said:
Hi all. If you were using a single tuner USB OTA adapter that is no longer working, please PM me. Thanks.

I have the dual tuner OTA adapter currently connected, but I have 2 of the single tuner OTA adapters that I can quickly connect - neither is seen by my H3.

View all replies (203)

JSheridan

Lifetime Supporter

Last reply Yesterday at 11:17 PM · posted in DISH Network Support Forum

All DMA's now Western Arc

I know HipKat said that they were working on conversions but we got the official news yesterday right from Dish that starting next month all DMA's will be on the western arc, and all customers will be assigned to that. That's gonna mean a lot of customers around here aren't gonna get Dish unless there are exceptions. Too many mountains and trees.

148 Replies · 3834 views

Load Replies (148) Reply Legacy View

Reactions: That American Girl, MikeD-C05, AkaDoubleG and 6 others

navychop

Oct 3, 2026

Years down the road

Reactions: scoob83 and charlesrshell

renjy651

Oct 4, 2026

navychop said:
Years down the road

Looks like Charlie Ergen will never give up satellite TV. The reason Echostar 25 the most poweful DBS satellite ever built at 110 location already. Also Echostar 26 another super satellite on order for 119 orbital location will be ready in 15 months. he will have 110/119 for another 20 years. Dish will be the only satellte company left. The reason for rural areas and some people like satellite easy to operate and change channels in seconds.

Reactions: Jimbo, HipKat, MikeD-C05 and 1 other person

Mister B

Oct 5, 2026

renjy651 said:
Looks like Charlie Ergen will never give up satellite TV. The reason Echostar 25 the most poweful DBS satellite ever built at 110 location already. Also Echostar 26 another super satellite on order for 119 orbital location will be ready in 15 months. he will have 110/119 for another 20 years. Dish will be the only satellte company left. The reason for rural areas and some people like satellite easy to operate and change channels in seconds.

I hope these new "most powerful" satellites will mean that DISH can provide every channel that can be sourced in HD in HD. I do not like the fact that two of my favorite channels (Start and H&I) are SD. I was also very disappointed after installation that METV has to be streamed from my internet connection. Finally, I dropped the locals upon seeing that my local CW channel is in blurry letterboxed SD when it has been HD OTA for years.

Reactions: scoob83, telstar_1, zippyfrog and 3 others

zippyfrog

Oct 5, 2026

Mister B said:
I hope these new "most powerful" satellites will mean that DISH can provide every channel that can be sourced in HD in HD. I do not like the fact that two of my favorite channels (Start and H&I) are SD. I was also very disappointed after installation that METV has to be streamed from my internet connection. Finally, I dropped the locals upon seeing that my local CW channel is in blurry letterboxed SD when it has been HD OTA for years.

This piece gets me - the fact that Dish has removed SD channels from satellite completely in the name of "HD upgrades". I pay for satellite TV, not streaming...I don't see why they couldn't leave the SD version of the channels on Satellite then put the HD streaming version like they have for other channels.

Reactions: Mister B and charlesrshell

navychop

Oct 5, 2026

zippyfrog said:
This piece gets me - the fact that Dish has removed SD channels from satellite completely in the name of "HD upgrades". I pay for satellite TV, not streaming...I don't see why they couldn't leave the SD version of the channels on Satellite then put the HD streaming version like they have for other channels.

CONTRACTS!

Reactions: charlesrshell, zippyfrog and dishrich

Henry Sanchez

Yesterday at 5:21 PM

What about the commercial services? will they keep using single Stacked or DP single/dual LNB's?

Reactions: charlesrshell

telstar_1

Yesterday at 5:58 PM

navychop said:
CONTRACTS!

At this point one can only ask whether any live ch's are still distributed in SD. Other than maybe "classics" ch's that run only older stuff

Reactions: charlesrshell

Strega

Yesterday at 10:01 PM

Even if you are broadcasting old SD-only shows, I would think advertisers would still want their commercials to look good.

Reactions: charlesrshell

Jimbo

Yesterday at 11:15 PM

telstar_1 said:
At this point one can only ask whether any live ch's are still distributed in SD. Other than maybe "classics" ch's that run only older stuff

Personally, I would HATE to see a SD Channel at this point.

Reactions: HipKat

Jimbo

Yesterday at 11:17 PM

Strega said:
Even if you are broadcasting old SD-only shows, I would think advertisers would still want their commercials to look good.

Advertisers on SD channels are probably Far and Few, very hard to find, they have very few viewers to watch them.

View all replies (148)

dishstaller

Pub Member / Supporter Lifetime Supporter

Last reply Yesterday at 11:01 PM · posted in The Chit Chat Club

You can't even trust the cost per ounce info in grocery stores anymore

I'm surprised Walmart hasn't banned this guy from all of their stores. He has been on their CASE the past few months.

View: https://www.youtube.com/shorts/f3zr37ekgKM?feature=share

50 Replies · 493 views

Load Replies (50) Reply Legacy View

Reactions: NYDutch

TRG

Wednesday at 6:41 PM

Jimbo said:
I would think that the Vendor/Maker of the product would have a say in it, showing the Correct weight ...
You would think it would be in the contract.

I do look at the ounces of items, but unless its way off, I don't check the math, may have to start now.

Remember when you use to get a 13.5 oz bag of Chips .... Thats a PARTY Size now.

I remember when a pound of coffee was 16oz. Now its 12oz, they don't call it a pound anymore and its three times the cost of the 16oz pound.

Reactions: dishstaller, slow_poke_pete and Bobby

Jimbo

Wednesday at 7:05 PM

TRG said:
I remember when a pound of coffee was 16oz. Now its 12oz, they don't call it a pound anymore and its three times the cost of the 16oz pound.

Well, they don't call it a pound anymore ....

Ice cream is that way too, use to be a half gallon, now its 1.5 quart or some say 48 oz

Reactions: Bobby

NYDutch

Wednesday at 7:39 PM

Jimbo said:
Well, they don't call it a pound anymore ....

Ice cream is that way too, use to be a half gallon, now its 1.5 quart or some say 48 oz

We have a regional ice cream company here that advertises that their ice cream containers are still a full half gallon.

Reactions: dishdude, Jimbo, Foxbat and 2 others

Jimbo

Wednesday at 8:54 PM

NYDutch said:
We have a regional ice cream company here that advertises that their ice cream containers are still a full half gallon.

Now check and see if any of them (probably a few) are actual Ice Cream ...

Most Ice Creams are Not actual Ice Cream.
Bryers for example, call Most of thiers "Frozen Dairy Dessert"

NYDutch

Thursday at 7:44 AM

Juan said:
You need to weigh the actual bag...a deli bag weighs less than that but a thick coffee bag is gonna weigh around an ounce...an empty tin can has some weight

Products sold by the ounce, pound, etc, should always be priced for the product only. Only the shipping weight should include the packaging.

Reactions: navychop, Foxbat, slow_poke_pete and 2 others

harshness

Thursday at 9:21 AM

NYDutch said:
Products sold by the ounce, pound, etc, should always be priced for the product only.

Unless the specific product or its packaging is known at the time of weighing, estimating the tare weight for a PoS system is a tall order.

I'm pretty sure that produce bags can't get any thinner.

You certainly don't want to put unbagged produce on a belt, scale, or in a clerk's hands (gloved or not).

Jimbo

Thursday at 9:27 AM

harshness said:
Unless the specific product or its packaging is known at the time of weighing, estimating the tare weight for a PoS system is a tall order.

I'm pretty sure that produce bags can't get any thinner.

You certainly don't want to put unbagged produce on a belt, scale, or in a clerk's hands (gloved or not).

I would think that all the packaging would already be accounted for ... they weigh the container, subtract that from the scale, then add the product , so its weighing the Product only

Reactions: Bobby, dishstaller and NYDutch

harshness

Yesterday at 4:42 PM

Jimbo said:
I would think that all the packaging would already be accounted for ... they weigh the container, subtract that from the scale, then add the product , so its weighing the Product only.

You would be thinking wrong when it comes to goods that are sold by weight (meat, produce, nails). Those items typically go on the scale wrapped without an associated tare. The weight only excludes the sticker because it hasn't been printed yet.

Jimbo

Yesterday at 5:08 PM

harshness said:
You would be thinking wrong when it comes to goods that are sold by weight (meat, produce, nails). Those items typically go on the scale wrapped without an associated tare. The weight only excludes the sticker because it hasn't been printed yet.

Thats ridiculous ....

Thats not how Deli does it, I know your talking pre packaged.
They need to CHANGE that.

harshness

Yesterday at 6:50 PM

Jimbo said:
Thats not how Deli does it, I know your talking pre packaged.

Perhaps only for sliced meat and cheese. Salads and similarly "shifty" or "drippy" items are typically weighed in deli cartons of some sort.

My monster burritos (up to two lbs.) are weighed in their foil jackets or paper mache take-out trays, and the jacket/tray is then "sealed" with the printed label as it comes off the printer.

Precision has to give way to practicality in situations like that.

TRG

Yesterday at 8:38 PM

Jimbo said:
Now check and see if any of them (probably a few) are actual Ice Cream ...

Most Ice Creams are Not actual Ice Cream.
Bryers for example, call Most of thiers "Frozen Dairy Dessert"

I only buy Tillamook and Alden's ice cream. The first ingredients are milk and cream.

Reactions: Foxbat and Bobby

Jimbo

Yesterday at 9:16 PM

harshness said:
Perhaps only for sliced meat and cheese. Salads and similarly "shifty" or "drippy" items are typically weighed in deli cartons of some sort.

My monster burritos (up to two lbs.) are weighed in their foil jackets or paper mache take-out trays, and the jacket/tray is then "sealed" with the printed label as it comes off the printer.

Precision has to give way to practicality in situations like that.

What ever I get out of the Deli is put into a container when I ask them for it, they weight the container and then add the deli product, thats the way its suppose to be, if the rest of the world is screwing you, you should try the place down the street.

Reactions: Foxbat and Bobby

Jimbo

Yesterday at 9:20 PM

TRG said:
I only buy Tillamook and Alden's ice cream. The first ingredients are milk and cream.

$7.50 a 1/2 gallon, thats worse than Bryers price wise.

Jimbo

Yesterday at 9:24 PM

Jimbo said:
$7.50 a 1/2 gallon, thats worse than Bryers price wise.

I'll give that a try next time, if I can find some in the right sugar areas.

Juan

Yesterday at 9:25 PM

Jimbo said:
What ever I get out of the Deli is put into a container when I ask them for it, they weight the container and then add the deli product, thats the way its suppose to be, if the rest of the world is screwing you, you should try the place down the street.

They are probably cheating you by swapping store brand product for name brand...those store deli's are very sketchy

Reactions: Jimbo

Bobby

Yesterday at 9:37 PM

$5.69 for the 48oz of Rocky Road at my Walmart.

Reactions: Foxbat

Bobby

Yesterday at 9:40 PM

Jimbo said:
I'll give that a try next time, if I can find some in the right sugar areas.

22g per serving.

Juan

Yesterday at 9:51 PM

Bobby said:
22g per serving.

How much is a serving?

Bobby

Yesterday at 9:58 PM

Juan said:
How much is a serving?

2/3 of a cup, a large scoop.

Jimbo

Yesterday at 10:46 PM

Juan said:
They are probably cheating you by swapping store brand product for name brand...those store deli's are very sketchy

They are made every day at this place ... it's a little Ma and Pop store ...

When ever I order something, they weigh the container (like everyone is suppose to) then weigh the product, so you actually get what your paying for lb wise ...

Jimbo

Yesterday at 10:47 PM

Bobby said:
22g per serving.

Thats about the same as the Bryers I get, I just have smaller portions.

Jimbo

Yesterday at 10:48 PM

Juan said:
How much is a serving?

2/3rds of a cup or 9 servings per container.

Jimbo

Yesterday at 11:01 PM

Bobby said:
$5.69 for the 48oz of Rocky Road at my Walmart.

Apparently my local Walmart doesn't carry that brand Tillamook ...
Kroger does .... Vanilla Bean $7.49 for 1.5 quart

Up here I have options of :
Vanilla Bean, French Vanilla, Cookies and Cream, Mud Slide and Strawberry

I will try the Strawberry and see what I think, IF the Sugar isn't any more than 22g ... it's Quite expensive.

Target does show it, cheaper, $5.99, however thier website says Not Sold in Store, closest store that carries it is 39 Miles away ....
I guess I better wait till WINTER to get it .. if it's that far away.

I'll have to check and see if Meijer has it ... YES they do ... $7.49 and a variety of Flavors

View all replies (50)

SuperDish_Fan23

Last reply Yesterday at 10:33 PM · posted in DISH Network Support Forum

Its crazy how the ViP922 is so rare for no reason.

Why are ViP922s So rare? like its crazy how ebay has none, i checked everywhere, also, i got a ViP222k now, which is actually activated!

33 Replies · 954 views

Load Replies (33) Reply Legacy View

Almighty1

Thursday at 8:53 PM

I remember this in the news too...

$14,000 spent on rented rotary phone

A widow rented a rotary dial telephone for 42 years, paying what her family calculates as more than $14,000 for a now- outdated phone.

www.nbcnews.com

Reactions: MikeD-C05 and charlesrshell

Bobby

Thursday at 9:21 PM

Almighty1 said:
I remember this in the news too...

$14,000 spent on rented rotary phone

A widow rented a rotary dial telephone for 42 years, paying what her family calculates as more than $14,000 for a now- outdated phone.

www.nbcnews.com

That is a misnomer. In the old days you subscribed to telephone service. That included the telephone line and one telephone. An extension cost $1 a month extra. So that $14,000 over 42 years was for the service not the leased telephone. There is no way they paid $28 a month for 42 years for a leased telephone.

Reactions: MikeD-C05, charlesrshell, AZ. and 2 others

HIFI

Yesterday at 12:44 AM

anybody remember this disaster ?

Reactions: MikeD-C05, charlesrshell and dishdude

SuperDish_Fan23

Yesterday at 4:24 PM

SuperDish_Fan23 said:
Why are ViP922s So rare? like its crazy how ebay has none, i checked everywhere, also, i got a ViP222k now, which is actually activated!

Whoever still has their 922, please let me know i just wanna see photos of the ui and other stuff

Reactions: charlesrshell

slow_poke_pete

Yesterday at 5:51 PM

SuperDish_Fan23 said:
Whoever still has their 922, please let me know i just wanna see photos of the ui and other stuff

View: https://www.youtube.com/watch?v=7wL6dsORmXg

Reactions: SuperDish_Fan23 and charlesrshell

telstar_1

Yesterday at 5:58 PM

Slicker guides never did much for me

Reactions: charlesrshell

Almighty1

Yesterday at 10:33 PM

Bobby said:
That is a misnomer. In the old days you subscribed to telephone service. That included the telephone line and one telephone. An extension cost $1 a month extra. So that $14,000 over 42 years was for the service not the leased telephone. There is no way they paid $28 a month for 42 years for a leased telephone.

Good point as part of that time mentioned was before I was even alive.

While reports from the family's case focused entirely on the equipment rental charges, media records show that Ester Strogen originally started by paying $29.95 per quarter ($9.98 per month) in the 1960s for her combined telephone connection.
The actual base cost for standard residential telephone service over a 42-year period (spanning roughly 1964 to 2006) reveals how basic connection costs evolved compared to the equipment rental fees:

Historical Phone Service Rates

1960s – 1970s Base Rate: Standard local phone service was heavily subsidized and tightly regulated under the Bell System monopoly. A basic landline package with unlimited local calling typically cost between $5.00 and $10.00 per month.
1980s – 2000s Post-Deregulation Rate: Following the AT&T divestiture in 1984, base line service rates steadily climbed due to the introduction of subscriber line charges, touch-tone fees, and local infrastructure adjustments. By 2006, basic flat-rate local residential phone service hovered around $15.00 to $25.00 per month (excluding long-distance packages and taxes).

The True Lifetime Service Bill

Assuming an average baseline connection fee of roughly $12.00 a month over that 42-year span, the line connectivity itself would have realistically accumulated to approximately $6,000 in raw cash payouts.
When you bundle the actual service costs together with the escalating equipment rental fees, the total cumulative out-of-pocket phone expenses over those four decades easily crossed $12,000 to $14,000. Long-distance phone calls—which were billed entirely by the minute back then and could cost up to 15 to 30 cents per minute—would add significantly more to that historical total depending on usage.

The widely publicized calculation stems from a viral news story from 2006 involving a widow named Ester Strogen. Her family discovered she had been continuously leasing two rotary dial telephones from AT&T for 42 years.
The total cost—which actually came out to more than $14,000 by the time the lease was canceled—was calculated based on the following legacy telecom structure:

The Monthly Fee: At the time her granddaughters discovered the charges, the ongoing leasing fee was $29.10 per month for the two outdated phones.
The Math: Over 42 years (504 months), paying roughly $24 to $30 a month accumulates to between $12,000 and $14,600 ($29.10 × 504 months = $14,666.40).

Why did this happen?
Prior to the landmark breakup of AT&T ("Ma Bell") in 1984, consumers were legally not allowed to own their phones; they were required to lease them directly from the phone company.
When the laws changed and phone ownership became legal, AT&T spun off its rental division into a company called QLT Consumer Lease Services. Millions of customers, particularly elderly individuals who were used to seeing a single unified phone bill, simply never realized that the small recurring "equipment lease" line-item could be canceled by buying a cheap phone at a retail store.

Yes, leasing absolutely cost that much in reality, and the math is entirely accurate. However, the calculations performed by the family did contain one major historical nuance: they multiplied the final 2006 rate across all 42 years, which means the actual total cash paid out was likely a bit lower.
The original viral story focused on 82-year-old widow Ester Strogen from Canton, Ohio, who paid $29.10 a month for two black rotary phones until her family intervened in July 2006.
The reality behind how the cost reached that staggering total breaks down into two distinct phases:

Phase 1: The Historical Base Rate (1960s – 1984)

When Strogen first got the phones in the 1960s, renting was a legal mandate and cost a fraction of the 2006 price—usually just a few dollars a month.

The "Insurance" Mirage: In exchange for that fee, Ma Bell promised free, lifetime maintenance. If the phone broke, they replaced it instantly at no extra cost.
The Cost-Plus Reality: Because these solid-state phones were built like tanks out of heavy plastic and steel, they almost never broke. Consumers paid a continuous premium for decades for a repair service they rarely used.

Phase 2: The Deregulation Rate Hikes (1984 – 2006)

After AT&T was forced to break up its monopoly in 1984, the rental side of the business was shifted to Lucent Technologies and later a legacy holding company. To maximize profit off a shrinking customer base, they steadily increased the monthly rental fees over the next 20 years.

By 2006, the rental cost had quietly ballooned to roughly $14.55 per phone per month.
When the family discovered the $29.10 monthly charge, they looked back at the 42-year span and estimated the collective loss at over $14,000.

Even adjusted for historical inflation—where $2 a month in 1964 had the purchasing power of roughly $20 today—Ester Strogen and hundreds of thousands of other elderly Americans realistically paid thousands of dollars out-of-pocket for standard desk phones they could have purchased at retail for $10.

The exact out-of-pocket dollar amount Ester Strogen paid over those 42 years was never publicly determined, as neither AT&T nor the family had access to monthly billing records stretching all the way back to the 1960s.
The figures reported in the media are entirely mathematical estimates based on the 2006 rate. The two primary numbers used to define the "cost" are:

The Stated Media Total: More than $14,000.
The Exact Family Formula: $14,666.40. This was derived by taking her final recorded bill of $29.10 per month and multiplying it across the full 42 years (504 months).

What the True Cash Cost Likely Was

Because AT&T did not charge $29.10 a month back in 1964, the true historical cash sum she handed over was lower than $14,000. In the 1960s and 1970s, basic phone lease fees were generally bundled into standard service or itemized at just $1.00 to $2.00 a month per phone.
If we realistically assume she paid lower base rates for the first 20 years before the post-1984 deregulation price hikes took effect, a realistic estimate of the actual cash paid is between $5,000 and $7,000.

The Real Cost When Adjusted for Inflation

While the family's $14,000 calculation overestimates the raw cash paid, it actually underestimates the true economic damage when factoring in the time value of money.
Paying $2.00 a month for equipment in 1964 sounds minor, but due to severe inflation during the 1970s, those early single dollars had the purchasing power of roughly $20.00 each in 2006 terms. If you adjust every historical lower monthly payment upward to account for inflation, Ester Strogen realistically lost the equivalent of well over $15,000 in modern purchasing power by renting instead of buying.

View all replies (33)

TWiT Tech Podcast Network

Yesterday at 9:52 PM · posted in TWiT Tech Podcast Network

Foursquare’s Hidden Location Data Became a Game #shorts

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/shorts/kBKUeLHP3zY

Direct YouTube Link - Foursquare's Hidden Location Data Became a Game #shorts
TWIT's Website
TWIT Live Feed

0 Replies · 16 views

Replies Reply Legacy View

juventusbrown

Yesterday at 9:37 PM · posted in C-BAND Satellite Discussion

40w transponder

Hi guys, is anyone getting any quality on transponder 4135 L 30000 I'm not getting any quality few weeks now.

Search

Search

Social Feed

1 dish 4 receivers

We're less than 4 weeks away from Voyager 1 reaching a distance of one light day from Earth

Song Name Game Part 3!

4K Events Discussion Thread

Channels on DIRECTV Satellite and not on Stream/Internet

OTA no working after Update

All DMA's now Western Arc

You can't even trust the cost per ounce info in grocery stores anymore

Its crazy how the ViP922 is so rare for no reason.

$14,000 spent on rented rotary phone

$14,000 spent on rented rotary phone

Foursquare’s Hidden Location Data Became a Game #shorts

40w transponder