Social Feed

starman345

Last reply Dec 14, 2008 · posted in C-BAND Satellite Discussion

GeosatPro CK1 - How to Shim

Got my new CK1 c/ku feedhorn this week and have noticed like a lot of these feedhorns, the scaler ring hole is larger than it needs to be making it difficult to get the feedhorn aligned with the dish. I've seen posts here of guys mentioning shimming things to make it work better, but what exactly can be done? I've thought about adding a couple more set screws but is there anything else that can be done?

9 Replies · 2026 views

Load Replies (9) Reply Legacy View

truckracer

Dec 13, 2008

I used pipe strapping used for hanging pipe. It comes in small rolls @ the hardware store. Just cut a piece and wrap the lnbf with it

starman345

Dec 14, 2008

truckracer said:
I used pipe strapping used for hanging pipe. It comes in small rolls @ the hardware store. Just cut a piece and wrap the lnbf with it

I"ve got some of that pipe strapping here, have used it before for lnbf bracket mods. Pretty soft metal, that might be just what the doctor ordered. If it ever warms up I'll give that a try also, thanks

14karat

Dec 14, 2008

Anole, I've been working on a design for an adjustable scaler mount... now that's all trash and I'm sitting here looking at a bag of EMT conduit fittings wondering why I didn't think of this before...
Where were your pics 3 weeks ago???

Anole

Dec 14, 2008

what's old, is new again

Well, all I can really take credit for, is knowing a good idea when I see it. -

CadData came up with that bracket, several years ago right here on the forum.
I don't see his post just off hand.
But, here are some more recent pix by PopCornNmore, who did a beautiful job on 'em.
I believe other members have used that design, as well.

Fabbed 'em over at a friends house, based on memory.
We sat down with the scalar, clamps, and made a sketch on a pad of paper, actual size.
I then cut out the drawing with scissors, and test-fit it to the parts for final QC.
The brackets were made from that final mock up, and fit perfectly.

It my picture, the side support struts on the dish are ½ inch diameter,
Think that was the smallest conduit I could find.
So the conduit clamps are even larger (maybe ¾" ?).
Somewhat overkill for the dish they're on (1-click my avatar for the big picture).
Those LNB support struts are hand-made, too.

14karat

Dec 14, 2008

Whoa... I see now, those aren't EMT fittings, those are just standard box clamps... Ok, well, what I've got going will still work... this will help a ton.

Anole

Dec 14, 2008

Glad to hear you've come up with a new variation.
When you're ready, open a new thread, and post pictures.
I'll dig up similar designs by others (Linuxman came up with a similar solution), and we can post all the pix in the one thread.
I think it'd make a wonderful reference for those who follow . . . - :up

View all replies (9)

TVHabit

Last reply 16 minutes ago · posted in Free To Air (FTA) Discussion

Hybrid Dish setup

Picked up a sweet directv dish, mount, twin lnbs and a short cable.
Has anyone converted one to FTA? A Frankenstein of sorts...

5 Replies · 141 views

Load Replies (5) Reply Legacy View

Titanium

Tuesday at 5:10 PM

Yes, many have hacked a DirecTV or Dish Network dish before. Quite undersized, but would receive the 97w KU stations with an LNBF swap. Make a template to set the LNBF face angle and distance from the reflector. Remove the current circular polarity LNBFs and make a bracket to hold the replacement linear LNBF in the correct centered position. Remember to set the polarity skew.

Reactions: TVHabit and FTA4PA

Brct203

Tuesday at 9:07 PM

would probably also work well for NHK on 101W and possibly for PBS on 99W. I used one for a while on 30W. Just keep in mind that because it's undersized for those satellites, it might work fine in clear weather but won't have much margin to account for signal degradation during rain/snow

Reactions: TVHabit

one_db_compression

Tuesday at 10:22 PM

If you can find one, the Shaw / Star Choice 75e ellipticals are great for use on 97, 99, and 101W. They are really just rebranded ChannelMaster 75 cm reflectors and use linear LNBFs by default out of the box.

Everyone else's mileage may vary.

Reactions: TVHabit

TVHabit

Today at 10:12 AM

I have read that some have converted this type dish but after giving it a good look, it's the lnb conversion that is the bottleneck. Does anyone have a picture of their attempt to configure the lnb? I watched a video on youtube from the save it for parts guy and he used duct tape! Guess it worked but I'm thinking something a bit more permanent!
Thanks to all for your interest and replies...

Titanium

16 minutes ago

Many of us have used a universal LNBF mount (or get creative with L brackets and plumbers tape - perforated metal strapping). Use a few inches of aluminum tube (or a piece of 1x2" lumber) to extend the support arm (replacing the plastic mount used by DirecTV and Dish) to place the LNBF throat opening at the correct distance from the reflector, the correct height and at the correct angle. Nothing magical... simply place the new linear LNBF in the center at the same distance, height and angle as the current combo.
www.amazon.com/Universal-Single-Bracket-Holder-FTA-US/dp/B074L85WK2

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply Today at 2:42 PM · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne

Get it?

An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....

68524 Replies · 2672327 views

Load Replies (68524) Reply Legacy View

Reactions: c-spand

dishstaller

Today at 9:56 AM

Mississippi Squirrel Revival - Ray Stevens

Reactions: FTA4PA

Bobby

Today at 10:25 AM

Mississippi Cotton Picking Delta Town - Charley Pride

Reactions: sdfntx, dishstaller and FTA4PA

harshness

Today at 11:29 AM

Delta Dawn - Tanya Tucker

Reactions: sdfntx, dishstaller and FTA4PA

dishstaller

Today at 12:33 PM

Can't You See - Marshall Tucker Band

Reactions: sdfntx

sdfntx

Today at 2:42 PM

See You in September - The Happenings

View all replies (68524)

dfergie

Staff member HERE TO HELP YOU!

Last reply Today at 2:04 PM · posted in The Chit Chat Club

Gas Price Info With National Gas Temperature Map

Stumbled across this ... http://www.gaspricewatch.com/USGas_ZipSearch.asp
I found no local prices, although it did show stations at my location...
Added these to this post...
USA National Gas Temperature Map
State By State Gasoline Taxes
Gas Buddy

Ethanol Free Stations

5550 Replies · 460524 views

Load Replies (5550) Reply Legacy View

Bobby

Thursday at 11:20 AM

Regular$6.099
Premium$6.599
Diesel$7.999
at Costco, Rohnert Park.

Bobby

Today at 10:27 AM

Regular$5.999
Premium$6.399
Diesel$7.999
at Costco, Rohnert Park.

Reactions: harshness

harshness

Today at 11:30 AM

I wonder if California is getting into the Winter formula.

dishstaller

Today at 12:32 PM

Bobby said:
Regular$5.999
Premium$6.399

Odd that out there, Prem is only 40 cents higher. Here it's a full dollar more.

Last night it was about $4.17 gas, $6,19 diesel.

harshness

Today at 2:04 PM

dishstaller said:
Odd that out there, Prem is only 40 cents higher. Here it's a full dollar more.

On the West Coast, a 40-cent differential is common. It used to be 30 cents before the prices rose above $3.

A "full dollar more" sounds like it may be boat gas (non-alcoholic), which is a whole different discussion.

View all replies (5550)

klang

Pub Member / Supporter Lifetime Supporter

Last reply Today at 2:00 PM · posted in TV Shows

Star Trek: Starfleet Academy - Paramount+

Season 2 order already in hand:

'Star Trek: Starfleet Academy' Renewed for Season 2, Tatiana Maslany to Guest Star in Season 1

I've not been optimistic about this show based on what I've read so far. Seems to be aimed at a younger audience. Interesting though that Tatiana Maslany will have some sort of role.

80 Replies · 3151 views

Load Replies (80) Reply Legacy View

Reactions: MikeD-C05, TheKrell and Foxbat

klang

Jul 28, 2025

I'm sure I will watch at least the first episode but I am not optimistic.

Reactions: MikeD-C05, Keith Brannen, long_time_Dish and 1 other person

klang

Oct 11, 2026

klang said:
I'm sure I will watch at least the first episode but I am not optimistic.

Here i am over a year later and just finished season 1. Not great but not as bad as I was expecting. Did not care for the barefoot captain stuff but overall ok. Actually looking forward to see what they did for season 2.

Reactions: MikeD-C05

MikeD-C05

Oct 11, 2026

klang said:
Here i am over a year later and just finished season 1. Not great but not as bad as I was expecting. Did not care for the barefoot captain stuff but overall ok. Actually looking forward to see what they did for season 2.

Yeah, the foot stuff was just nasty. I kept thinking of how dirty her feet would get traipsing around shoe-less. Funny, I love being shoe less at home and never wear shoes indoors in my home for long, but seeing her laying on all her furniture with her bare feet hanging out just kind of grossed me out.

Reactions: long_time_Dish

harshness

Tuesday at 11:28 AM

MikeD-C05 said:
I kept thinking of how dirty her feet would get traipsing around shoe-less.

Where would this "dirt" come from? Dead skin and dandruff?

MikeD-C05

Today at 12:51 PM

harshness said:
Where would this "dirt" come from? Dead skin and dandruff?

There would still be dirt ,dust in the future I am sure. So walking around the station like she did she would get stuff on her feet. I am sure the robot vacuum is still going to miss stuff, with all those different alien species running around there.

harshness

Today at 2:00 PM

MikeD-C05 said:
There would still be dirt ,dust in the future I am sure.

Where is it going to come from -- specifically?

Why do you think cleaning technology won't improve in the next few hundred years? HEPA filtration was invented as part of the Manhattan Project.

View all replies (80)

JohnGalt1234

Last reply Today at 1:49 PM · posted in DISH Network Support Forum

H3 EHD lists upcoming airings instead of recordings on EHD and often won't recognize EHD is connected after reboot

This started a couple months ago. I have 2 H3s on one network, both with 2 EHD identical 3 TB seperately powered so all recordings are accessible by all 4k & J4s (8 of them).

On one H3 (not the main one that controls the MOCA network), after it reboots, it doesn't recognize it has two EHDs plugged into it. Rebooting the EHD by their power source doesn't fix it. Resetting the network doesn't. Software h3 reset doesn't fix it. Rebooting MOCA h3 doesn't fix it but so far, after 3+ cold boots (unplug pwr to H3 with unrecognized EHDs), it finally it figures out they are plugged into it. BUT.... Then when you open a program it only partially shows series and episodes, but instead of showing recordings, it only shows upcoming airings. HELP!!!!

25 Replies · 415 views

Load Replies (25) Reply Legacy View

navychop

Yesterday at 3:40 PM

It'll only see two EHDs at a time.

Reactions: Bobby and charlesrshell

Almighty1

Yesterday at 7:18 PM

JohnGalt1234 - So you basically have 2 Hopper 3's. The CasinoH3 is the one that is Hopper 3 only while Master Bedroom is a Hopper 3 with Hopper Plus setup.
Master Bedroom uses Android TV (ATV) software so the DISH part is actually a app and will behave differently as you can probably tell the Guide's are different on the Master Bedroom which will resemble the same guide used on other ATV devices such as the Joey 4 and Wireless Joey 4. If I am correct, the CasinoH3 is the one with the problem since you did say the one dated 09/05/2026 is the naughty one while 08/15/2026 named Master Bedroom is the nice one. Usually I would expect the CasinoH3 to be the one without the problem because it's Hopper 3 only and Master Bedroom would be the one with problems because it has the Hopper Plus involved. That is why they behave differently because CasinoH3 is running the native Hopper 3 software while Master Bedroom is running the Android TV software and also it runs a app called DISH known as package com.dish.atv.launcher, the version for mines is P15403 2026100917 so it's probably the same version as the Hopper Plus software version with the date of October 9, 2026, not sure what the 17 means except maybe revision 17?

This explains it better than I can. Sorry, had to take all the ads out.

Reactions: charlesrshell

JohnGalt1234

Yesterday at 9:02 PM

Almighty1 said:
JohnGalt1234 - So you basically have 2 Hopper 3's. The CasinoH3 is the one that is Hopper 3 only while Master Bedroom is a Hopper 3 with Hopper Plus setup.
Master Bedroom uses Android TV (ATV) software so the DISH part is actually a app and will behave differently as you can probably tell the Guide's are different on the Master Bedroom which will resemble the same guide used on other ATV devices such as the Joey 4 and Wireless Joey 4. If I am correct, the CasinoH3 is the one with the problem since you did say the one dated 09/05/2026 is the naughty one while 08/15/2026 named Master Bedroom is the nice one. Usually I would expect the CasinoH3 to be the one without the problem because it's Hopper 3 only and Master Bedroom would be the one with problems because it has the Hopper Plus involved. That is why they behave differently because CasinoH3 is running the native Hopper 3 software while Master Bedroom is running the Android TV software and also it runs a app called DISH known as package com.dish.atv.launcher, the version for mines is P15403 2026100917 so it's probably the same version as the Hopper Plus software version with the date of October 9, 2026, not sure what the 17 means except maybe revision 17?

This explains it better than I can. Sorry, had to take all the ads out.

View attachment 194857

As I understand it, the android is just the display signal from the hopper+. I can disconnect the H+ and plug the hdmi directly into the master hopper3.

Reactions: charlesrshell

Almighty1

Today at 12:02 AM

JohnGalt1234 said:
As I understand it, the android is just the display signal from the hopper+. I can disconnect the H+ and plug the hdmi directly into the master hopper3.

It is not just a display signal as explained above. When you have the Hopper+ connected, it uses Android TV for pretty much everything except for the satellite signal which is why it uses the DISH app for the standard Hopper 3 functions. But that should not matter because in your case, CasinoH3 is the Hopper 3 with the EHD which is what you call the naughty one based on the dates you mentioned and Master Bedroom which has the Hopper Plus connected to the Hopper 3 that does not have the problem. So one way to test the theory is disconnect the Hopper Plus from that Hopper 3 and then use the EHD's connected to CasinoH3 currently to see if the same issue exists. That way you will know if the problem is there without a Hopper Plus connected or if CasinoH3 is just a bad hopper to begin with.

Normally when you disconnect the Hopper Plus, it will be 30 minutes or more before you can use the Hopper 3 again.

What you want to do is:
hold the POWER button in, not the red reset button, for about 45 seconds or so while disconnecting the power to the Plus and moving the HDMI cable and it will reboot to the normal Hopper only immediately.

Reactions: charlesrshell

bookworm370

Today at 1:41 PM

navychop said:
It'll only see two EHDs at a time.

Yes, I have only two online at a time.
One comes online, the other one consistently will not come online

Reactions: charlesrshell

bookworm370

Today at 1:49 PM

bookworm370 said:
Yes, I have only two online at a time.
One comes online; the other consistently won't. Also, when I connect the EHD, the USB Detected status light on the EHD itself changes from Red to Green. But the Hopper (713) does not start the EHD read process. The light changes to indicate that the EHD has detected a valid USB cable, but the Hopper does not recognize it.

View all replies (25)

iJustine

Today at 1:12 PM · posted in iJustine

Microsoft Surface ultra unboxing

Time for another AWESOME video from iJustine!

View: https://www.youtube.com/shorts/uJiZVGQC3Gc

Direct YouTube Link - Microsoft Surface ultra unboxing
The official iJustine Website's Website
Buy her book!

0 Replies · 7 views

Replies Reply Legacy View

TWiT Tech Podcast Network

Today at 1:12 PM · posted in TWiT Tech Podcast Network

OpenAI Sued by 8 U.S. States

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/shorts/bs1MNA6jlm4

Direct YouTube Link - OpenAI Sued by 8 U.S. States
TWIT's Website
TWIT Live Feed

0 Replies · 8 views

Replies Reply Legacy View

Peter Parker

Supporting Founder Lifetime Supporter

Last reply Today at 1:01 PM · posted in DISH Network Support Forum

DISH Hopper 3 Software Version 713 Is Out

No idea what improvements might be involved.

16 Replies · 709 views

Load Replies (16) Reply Legacy View

Reactions: LQQK and reubenray

bookworm370

Yesterday at 3:17 PM

Has anyone noticed an FF stutter with 713? I used to be able to hit FF a few times and skip smoothly. After 713 (maybe 712), when I skip forward, there is a definite stutter for as many times as I have pressed FF.

Can anyone check on this and report back? Recorded programs and then press skip forward a few times to see if it's smooth? Normally, it just jumps to the right place after the skips.

Reactions: charlesrshell

reubenray

Yesterday at 6:40 PM

I got the 713 update yesterday.

Reactions: charlesrshell

naptime

Today at 1:05 AM

I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.

Reactions: charlesrshell

reubenray

Today at 6:14 AM

bookworm370 said:
Has anyone noticed an FF stutter with 713? I used to be able to hit FF a few times and skip smoothly. After 713 (maybe 712), when I skip forward, there is a definite stutter for as many times as I have pressed FF.

Can anyone check on this and report back? Recorded programs and then press skip forward a few times to see if it's smooth? Normally, it just jumps to the right place after the skips.

My wife mentioned that her remote is acting strange this morning. She hit FF and it went to 15x FF.

Reactions: charlesrshell

Bobby

Today at 10:32 AM

naptime said:
I'm getting fabulous picture on Ch. 148 4k, but zero audio with H713. This is with a recorded show (Notre Dame game). Anyone else have this? Audio is fine on every other channel.

This has been an ongoing issue. A fix is coming, probably in the next software version.

Reactions: naptime and charlesrshell

dishstaller

Today at 1:01 PM

reubenray said:
My wife mentioned that her remote is acting strange this morning.

Had a customer call recently saying their remote was really acting up, some buttons no longer functioned. Told them to reboot the Hopper....problem fixed.
Wife bought me a t-shirt that has "have you tried turning it off and on again?"

https://www.amazon.com/Have-Tried-Turning-Again-T-Shirt/dp/B07G1ZV9W9/ref=sr_1_11?crid=3NNRAEED195WV&dib=eyJ2IjoiMSJ9.86TxUTPcw48CRYlDcLntwpMxbPDBfjiLu4wMZGX3VN6ajG_cFCuoDBJT7pS9CW2mjThKlke5Z6dlXH8bJKkQF4s892wGVU1ca_00S0BQz6F15V30_4szIdWeycvw3_zoVtsULQASM8bGcgvsKms930xApC43y_-YBVN0Q8Xsf_csSqXcmhWpresARdXHfx2VazllrXI8asduvrbnk9S3CGnzjqnVTkjzFSpSQLdQKA6Dx_7UfbQIBBJsqAmQwwtDGqM0YKVIkjV4ARgVJvJ69vLPhxV0m8pkJQd_2w_QX_A.-jSy9OqrqWdxPBsgZGia1hHMbvDAKxxhRn9kK1EBdCc&dib_tag=se&keywords=have%2Byou%2Btried%2Bturning%2Bit%2Boff%2Band%2Bon%2Bagain&nsdOptOutParam=true&qid=1792342839&sprefix=have%2Byou%2Btried%2B%2Caps%2C265&sr=8-11&customId=B0752XJYNL&customizationToken=MC_Assembly_1%23B0752XJYNL&th=1&psc=1

Reactions: charlesrshell

View all replies (16)

telebiker

Last reply Today at 12:54 PM · posted in DISH Network Support Forum

Dish Hopper and Dish Hopper Plus No Alexa in settings

I have Dish Hopper and Hopper Plus and also have Alexa Echo. I link the Alex skill to Dish and it asks me to enter the pairing code shown on the TV. I go into Dish Settings and there is no Alexa shown. Not sure what to do.

16 Replies · 706 views

Load Replies (16) Reply Legacy View

Reactions: tanman

HipKat

Mar 15, 2026

Guys,
Android is Google. Google is Android. Android OS and Google TV are the same thing.
The Hopper+ and Joey 4's run Android TV, which is Google's television version of Android.
That means under the hood, you have:

Linux kernel
Android framework
Google TV / Android TV interface
Google Play Store for TV apps

Alexa is the competition. Google is not going to host their competition.
The old Hopper Carbon UI is NOT Google so that's why Alexa was on there.

Reactions: KAB, tanman, Cold Irons and 2 others

Harryhaggle

Mar 18, 2026

Understood. But here's the rub - Google Assistant setup is ALSO missing from the Hopper Plus setup. I'm a paraplegic.and need to use voice controls as much as possible but I can't press a button on the remote to activate Google Assistant. I prefer ALEXA (or ALEXA+) but I have one older google device and will go that route IF they make it available. BTW calling Dish Customer Service is no help- they just say they have no info on if/when there will be an update.

Reactions: navychop and charlesrshell

navychop

Mar 18, 2026

Ungood.

Reactions: charlesrshell

reubenray

Today at 10:17 AM

What is the purpose of connecting Alexa and the H3?

Reactions: charlesrshell

navychop

Today at 12:54 PM

Tell Alexa verbally what to do.