Social Feed

Dovetails
Last reply · posted in DIRECTV General Forum
First of all I'm not trying to start a flame war between providers, but here's my situation. I'm currently a Dish sub (and have been for 11yrs). I've been thinking of upgrading to HD programing which would also require a couple of new receivers. Well, upon investigation I'm a little ticked at Dish because they want me to shell out 300.00 to upgrade to the receivers I'd want. :mad: (a 722 / 211 combo) Now, we've been 'model' subs to Dish for the entire 11 yrs. Never late / never missed! There is no way I am going to pay them 300 bucks up front and this has got me thinking about jumping ship :( I've had no complaints whats so ever with Dish up till now, but I feel this is no way to treat a long standing customer, especially when I'll be increasing my mth. bill to them by another $25.

So my question is .... will I be a happy camper in the D* camp? How reliable is the signal / equipment / service etc.? It will cost me a little more with D* in the long haul (once past promos) but I can live with that. Also, what happens when your with D* as a current sub and there comes a time to 'upgrade' equipment with them? Do they have any kind of program for that or do you have to antty up for that on your own??

As far as programing goes ..... we watch reg sat. programing only (usually mid level package) - NO premium / NO PPV / NO extras. So what do you all think, is this a smart move or will I eventually have the same issues with D* some day.
11 Replies · 2843 views
rad
rad
DirecTV has been giving free or low cost upgrades to MPEG4 HD gear for folks that have MPEG2 HD gear. I got a free HR20 to replace a HR10-250 while I've seen others say they had to pay $99. Right now if I check the DirecTV web site it says I can get any receiver for free except a HD DVR which would be $99.00. But like Dish if you call you might get a CSR that would give you upgrades for free or tell you to take a hike.

As for your question on signal reliabilty, you'll get rain fade like with Dish but you don't have problems like folks on the edge of the 129 foot print which see outages every now and then as the satellite wobbles around. As for hardware some folks will say it's POS's just like you can find E* customers that say their hardware is a POS. Others will say no problems at all with both providers, so the answer is YMMV I guess. I can say my four HD DVR's work.

Also check out the Cutting Edge section on this site, which allows DirecTV customers to test out new software and get a sneak peak at new features. You can see some of the things that might be coming soon which might help your decision.

You might also want to check out the PDF at http://www.dbstalk.com/showthread.php?t=95242 which has a summary of the differences between D* and E* HD DVR's.
T
Happy I Switched

I was a 12 year Dish customer when I switched this last October. I don't watch PPV or get any premium channels and am very happy that I am with D. I feel the company is run much more professionally than E with better customer service. Have never had to explain my problems with CS to a person in another country and hardly ever put on hold when I called. D has remote programming of your receiver either through your cell phone or the website, which is another nice feature currently not available on E. They do have HD channels that E doesn't have and might not ever have and I am sure that E has some HD that D might not ever get. Rain fade is much less that with E for me. I am also very impressed with the broadcast of the Australlian Open and understand that this is typical of how D handles the big sport events. Costs for me will be about $20/month less after the promo period ends. The big difference is the receiver. With E I had a 622 and it was a far superior machine than the HR22 that I have now, but I have got used to it and it is not as big a deal as I thought it would be or that others make it to be. In the future I am sure that D will come out with a better receiver. As far as I know you can also hook up an external hard drive and they don't charge you a fee like E does. So overall I am much impressed with D and very happy that I switched and I agree with others here that you should look at the programming to fit your needs. One bit of advice. If you do decide to switch go to a local installer and not online. That's what I did and had my system installed two days after going into their office to sign up and got all of the same deals. Two weeks after the install he even came back to re sight to dish just to make sure that it was dead on and I did not call him out to do it. Just the way he ran his business!:)
A
The key to it all is your expectations. The two services are pretty similar unless you are a geek like many of us and like to nit pick every little thing. So long as you don't treat your provider like it has a direct impact on the size of your wee wee you should in all honestly be happy with either, assuming they have the channels you want and services.

So my advice to you is to check out the channels you want, what packages they are in, HD availability, locals, and DVR comparisons.

These days they are pretty much neck and neck in all those. The DVRs are essentially a wash at this point they both work well enough and if you have no preconceived notions about them initially you won't notice any of the nit picks about them. One provider may require more dishes for all your stations, one may have slightly better reception dependin on the area of the country you are in but all in all they are going to both be pretty much neck and neck.
riffjim4069
Just my two cents...

You'll be happy with D* to varying degrees...better value with D* if you're a high-end customer, better value with E* if you're lower-tiered customers; E* had the superior HD DVR, but D*'s isn't too bad (much better than the Moto/SA used by Cable); D* also offers more Sports programming and better quality HD.

I hate the way E* treats their "most valued customers" - new customers usually get the better deals and long-time customers often have to write ceo@echostar.com or threaten to cancel service before the "new customer" offer is extended to them. To be honest, your best bet is to cancel your service at the end of your billing cycle (call 2-3 weeks in advance). You will be transferred to someone in customer retention who will ask you the reason for your terminating service. Tell 'em D* is providing you with all the necessary receivers...and tell 'em you shouldn't have to beg to receive a new customer promotion after being with Dish Network the past 11+ years. The odds are pretty good they will make you an acceptable offer. If not, rest assured someone from customer retention will contact you in the coming days and offer you an ever better deal...to include free programming and discounts.

You sound like you're pretty happy with Dish Network, so my suggestion is work the system to your advance. I think you'll fare better with customer retention than you will with the CEO email address. Again, I wish E* would just do a better job of taking care of the their long-term customers who often use the same receivers for 5 or more years. Back in November, I called Verizon (FiOS) to complain that I was not getting the new HD channels...and they offered to upgrade me to the HDExtreme Package (new customer promotion) and boost my Internet from 10/2 to 20/5 for no additiona charge. Plus, I was able to shave 5-months off my 2-year contract (new contracts are only 1-year), waive a $16 HD DVR charge for 3-months, free HBO-Max for 1-months, and additional $10 discount for 3-months all under the "new customer" promotion. Heck, I didn't even have to ask...much less beg! Again, I just don't see why Dish Network doesn't take better care of their truly "valued" customers.
J
It's been a while since I have had any experience with Dish Network, but way back when we switched from Primestar to Dish and then to DirecTV, it seemed to me that Dish Network was run like a startup, not quite professional company. Sure, they had good service but their receivers didn't have quite the polish that the DirecTV ones did (of course DirecTV had major CE companies building their boxes at the time) and even down to the production values of DirecTV promos, the 101 how to channel vs. dish network's promos and intro channels made DirecTV seem more 'professional' or somehow more like a major player/corporation. To some people that's not important, and in the grand scheme of things to me it wouldn't be the deciding factor, but then factor in the constant programming arguments that Dish Network has (yet they still have price increases the same as DirecTV), it just seems like even through two ownership changes in the past few years, DirecTV seems to be better managed and better equipped to continue forward.

I'm moving soon and will be thankfully able to get satellite again and will be dumping cable. I'm getting DirecTV and hopefully I won't have to worry about what their upgrade plans are, etc. If I can get a stable setup, I don't want to think about switching, dealing with installs, etc. every year or 6 months like some people do..which is fine for them, but not really my cup of tea :)
Zynergi
You might also want to check out the PDF at Comparing the HR10-250, HR20-100/700, HR21-700 and ViP622/722 - DBSTalk.Com which has a summary of the differences between D* and E* HD DVR's.


That comparison isnt entirely accurate, the first problem is they group the HR22/23 with a HR21.. some quick things I noticed was on hide channels.. D* allows this and Adult Hide is the first option in the parental menu. Auto Record HD version, D* always defaults to the HD version of the channel unless you manually set it to the SD. Channels I Receive is now automatically grayed out for non sub channels.

Something to try is.. Call a E* CSR to cancel, tell them a Directv guy is there finishing up.. you will go to the next tier where they will finally offer you some deals. Sad that you would have to go that far.. but if you want to stay with Dish that may be something to try.

I was so impressed with D* at my parents house that I decided to start working for them.. I wasnt impressed with the run around E* gave them.
J
Last reply · posted in DISH Network Support Forum
This started a couple months ago. I have 2 H3s on one network, both with 2 EHD identical 3 TB seperately powered so all recordings are accessible by all 4k & J4s (8 of them).

On one H3 (not the main one that controls the MOCA network), after it reboots, it doesn't recognize it has two EHDs plugged into it. Rebooting the EHD by their power source doesn't fix it. Resetting the network doesn't. Software h3 reset doesn't fix it. Rebooting MOCA h3 doesn't fix it but so far, after 3+ cold boots (unplug pwr to H3 with unrecognized EHDs), it finally it figures out they are plugged into it. BUT.... Then when you open a program it only partially shows series and episodes, but instead of showing recordings, it only shows upcoming airings. HELP!!!!
19 Replies · 233 views
Almighty1
That would pinpoint it to the H3 that is the problem. Are both H3's on the same software version now and before? Did the system check actually do the full EHD test like the one below?

1792005788136.webp
  • Like
Reactions: charlesrshell
J
That would pinpoint it to the H3 that is the problem. Are both H3's on the same software version now and before? Did the system check actually do the full EHD test like the one below?

View attachment 194781
That didn't appear on the system check I ran on it. How do you trigger that test?
  • Like
Reactions: charlesrshell
J
That didn't appear on the system check I ran on it. How do you trigger that test?
They are both currently listed at V. H711 bootstrap V 1117 but the dates (are those install dates or V dates?) Are 9/5/2026 on naughty H3 and 8/15/2026 on nice one.
  • Like
Reactions: charlesrshell
Almighty1
They are both currently listed at V. H711 bootstrap V 1117 but the dates (are those install dates or V dates?) Are 9/5/2026 on naughty H3 and 8/15/2026 on nice one.
I just check my bootstrap in H713 and it says 1017, are you sure you have 1117? The dates are install dates.
  • Like
Reactions: charlesrshell
J
I just check my bootstrap in H713 and it says 1017, are you sure you have 1117? The dates are install dates.
20261014_154605.webp
20261014_154605.webp
Almighty1
Thanks JohnGalt1234 - That's interesting. I wonder are the Boot Strap versions different between a Hopper 3 only and a Hopper 3 with Hopper Plus setup as I have the later. I guess when charlesrshell is able to since he has both setups, he can do the test. Unless the bootstrap version is tied to when the specific Hopper 3 is manufactured, in my case, mines is from February 2016 when it was installed.

At least Google Search AI is saying the bootstrap version will never change and unique to each Hopper 3.

1792277626286.webp


This is probably why different people seem to either have the issue or they don't because the bootstrap code could also be tied to the hardware revision and
components other than the internal HD.
J
Sorry about dupe images... having a heck of a time trying to post an image of other H3 that my gf text to me.
J
Sorry about dupe images... having a heck of a time trying to post an image of other H3 that my gf text to me.
1000013035.webp
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 2 views
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
Anyone making their own breakfast sausage? I've recently been trying different recipes, found some I like, some I've modified...
41 Replies · 3591 views
  • Like
Reactions: spongella
navychop
Bob Evans Sage.
R
Bob Evans Sage.
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
  • Like
Reactions: navychop
S
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
owens on amazon is 54.99 for a 4 pk 16 oz a sausage. i feel that's kind of steep!!!
R
owens on amazon is 54.99 for a 4 pk 16 oz a sausage. i feel that's kind of steep!!!
Especially when I can get a two pound roll of Jimmy Dean from Sam's Club for $7.38.
dfergie
They run Owens at $3.99 for lb and $7.99 a couple times a month at some grocery stores here, I actually was wrong, just checked a pork sirloin roast it was $1.99 a lb. (cooked it yesterday so pack was in trash)
  • Like
Reactions: reubenray
TRG
TRG
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
Kroger stores carry Bob Evans Sage Sausage. For me that means Smiths.

1631.webp
R
Kroger stores carry Bob Evans Sage Sausage. For me that means Smiths.

View attachment 194848
No Kroger's near me. I live in the heart of Walmart land. The only option besides Walmart is Harp's.
TRG
TRG
I live in the heart of Walmart land.
My deepest condolences.
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
No idea what improvements might be involved.
12 Replies · 557 views
  • Like
Reactions: LQQK and reubenray
cpdretired
Two bugs out and three new bugs in.🐞
Almighty1
Updated to H713 on a Hopper 3 from H712 with Hopper Plus a few hours earlier.

It brought a old problem back:

One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software.

This was a major problem with H703.

H710 removed that dependency but it's broken again.

Rick Durham and brittanygarden
  • Like
Reactions: charlesrshell
dishstaller
Two bugs out and three new bugs in.🐞
Yep. Just got a call from a customer who said her DVR buttons stopped working. Told her about the new software and had her reboot her H3, problem solved.
  • Like
Reactions: charlesrshell
bookworm370
Yep. Just got a call from a customer who said her DVR buttons stopped working. Told her about the new software and had her reboot her H3, problem solved.
Reboot just fixes it for a short time and then it's back to messed up

Try going exclusively to an IR remote and you will see the pain
Almighty1
Updated to H713 on a Hopper 3 from H712 with Hopper Plus a few hours earlier.

It brought a old problem back:

One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software.

This was a major problem with H703.

H710 removed that dependency but it's broken again.

Rick Durham and brittanygarden

Within the last few hours as I did check earlier today when it was still missing, the Available Joey Software line now has added "P154 P15403" which is for the Hopper Plus that I have but my Hopper Plus software is still on P15317, I will do a Download Android TV (ATV) Software for the Hopper Plus, Joey 4 and Wireless Joey which are all Android TV devices and then manually do a check update on the Hopper Plus to update the software shortly.
  • Like
Reactions: charlesrshell
BatStang2000
This happened to me. I was outside mowing and my wife came out and said that our nieces and nephews were going to be on the Noon News. She had it on in the bedroom on our Joey3. Since they weren't on yet, I decided to turn it on in the Living Room on our Hopper3. When I selected the channel (through Dish, not OTA) the Joey3 turned itself off. When I went back to the bedroom to turn it back on, the Hopper3 did a reboot. Luckily it all finished before their story came on, but I just found it strange.
bookworm370
Has anyone noticed an FF stutter with 713? I used to be able to hit FF a few times and skip smoothly. After 713 (maybe 712), when I skip forward, there is a definite stutter for as many times as I have pressed FF.

Can anyone check on this and report back? Recorded programs and then press skip forward a few times to see if it's smooth? Normally, it just jumps to the right place after the skips.
  • Like
Reactions: charlesrshell
R
I got the 713 update yesterday.
cpdretired
Supporting Founder
Last reply · posted in DISH Network Support Forum
Several Dish offers showed up today in my account. Once you choose one the rest are removed. Offers were Showtime, Starz, AMC and others.
38 Replies · 1796 views
  • Like
Reactions: ewindowman and LQQK
B
Just checked my account and it shows mgm+ at 8.00 per month, but that has red line drawn thru it and shows 0.00 per month. But it doesn't say how long this lasts,...... 1 month, 3 months, forever. I called customer service to get an answer, and they said nothing like that exists. Should I add the offer or not? Already paying them too much, but want to take advantage of something free.
S
Just checked my account and it shows mgm+ at 8.00 per month, but that has red line drawn thru it and shows 0.00 per month. But it doesn't say how long this lasts,...... 1 month, 3 months, forever. I called customer service to get an answer, and they said nothing like that exists. Should I add the offer or not? Already paying them too much, but want to take advantage of something free.
look again mine says free for 1 month
  • Like
Reactions: charlesrshell
Almighty1
look again mine says free for 1 month
Not for me, mines has no mention of how long aka the offer period and the Terms and conditions the $0.00 is good for. All I see is one can lose $5.00 if you decide to remove it before day 31 after you add it to the account.

1792131071109.webp
S
Not for me, mines has no mention of how long aka the offer period and the Terms and conditions the $0.00 is good for. All I see is one can lose $5.00 if you decide to remove it before day 31 after you add it to the account.

View attachment 194817
wonder why it says that
  • Like
Reactions: charlesrshell
Almighty1
look again mine says free for 1 month
You have a different offer that is free for a shorter timeframe which is different than the one that I and bnewt saw without defining the promotion period as I sent the question to DISH Care via Facebook Messenger and this is the response I got back 20 minutes ago.

1792177553912.webp
Almighty1
wonder why it says that
Answer 2 minutes ago from DISH Care via Facebook Messenger:
1792178974514.webp
bookworm370
Thanks, I tried it on the website first. I'll try it on the hopper
Darrell S
I tried on Hopper last night. Many more offers than the website has. I even got 3 free months of Gallery. Only offered 1 month on website
  • Like
Reactions: charlesrshell
long_time_Dish
I got Starz/Encore again for 50% off for 3 months yesterday.
  • Like
Reactions: charlesrshell
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68512 Replies · 2671709 views
  • Like
Reactions: c-spand
FTA4PA
Six O'Clock News - John Prine
  • Like
Reactions: sdfntx
Bobby
It's Five O'Clock Somewhere - Alan Jackson
harshness
Somewhere - Barbra Streisand
sdfntx
Somewhere in Time - John Barry
long_time_Dish
In Time - Kit Watkins
Former member 209992
Last reply · posted in SatelliteGuys Support Center
For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
540 Replies · 18276 views
  • Like
Reactions: charlesrshell
Scott Greczkowski
Was down due to an emergency update at the ISP. They did email me seconds before they took it down and apologized for the short notice.

However once the server was back online NGINX failed to start.

I was at the grocery store and just rebooted the entire server and everything came back up again.

Just got home from the grocery store I will bring in the groceries and then take a look at what NGINX failed the first time.
comfortably_numb
Was down due to an emergency update at the ISP. They did email me seconds before they took it down and apologized for the short notice.

However once the server was back online NGINX failed to start.

I was at the grocery store and just rebooted the entire server and everything came back up again.

Just got home from the grocery store I will bring in the groceries and then take a look at what NGINX failed the first time.

NGINX
The site uses Nugenix?!


View: https://youtu.be/_DhEEo5S9fg
Scott Greczkowski
Ok checked it out and for some reason the web server (NGINX) tried starting before the DNS resolver fully loaded. This is why it worked when I rebooted the machine.

Thanks to ChatGPT it had me change the NGINX config to prevent this from happening again.

With that said I can't prevent the ISP from doing emergency upgrades which was the cause of all of this.
navychop
Nature will develop better idiots.
  • Like
Reactions: charlesrshell
TRG
TRG
Nature will develop better idiots.
God help us.
brittanygarden
Staff member Pub Member / Supporter
Last reply · posted in DISH Network Support Forum
Please post your remote make/model here and any details of your issue. We are looking to collect as many examples as possible. I may reach out to you for your receiver number, but please do not post it here.

If you've already reported this to me, please repost it here so I can track all instances in one thread.

Thanks!
Brittany
22 Replies · 689 views
david_jr
I lost IR control of my H3 after the H398 update in September of 25. We were using the Harmony Hub remote system from Logitech. We have been using the H3 OEM remote to turn the receiver on and off ever since then.

H398 Software Version
bookworm370
I have a solution that is guaranteed to work.
All Hopper developers are required to turn in their RF Hopper remotes and use only IR remotes.

I guarantee you that the bug will be fixed in two days!
Try it; it will work! They will work 24 hours a day to fix it when the WAF goes into the toilet!
GRB1959
I have a solution that is guaranteed to work.
All Hopper developers are required to turn in their RF Hopper remotes and use only IR remotes.

I guarantee you that the bug will be fixed in two days!
Try it; it will work! They will work 24 hours a day to fix it when the WAF goes into the toilet!
Excellent suggestion.
Foxbat
As I was testing 4K on my Hopper 3 running H713 10/7/2026 by watching the NLCS Game 2 on Channel 148-01, I had been using my Dish 52.0 remote to navigate. I grabbed my Harmony One and pressed "Info". This caused the Hopper 3 to crash and restart.

After it restarted, the game finished so I pressed "Options" on the 52.0 remote to access the TV Activity screen. I pressed Select on the tuner with the NLCS game active and arrowed-down to select "Stop Recording". Again, the Hopper 3 crashed and restarted.

After it came back up, I used Recall to return to "Maine Cabin Masters" and when I tried the Options button again, I saw that the NLCS Game was still being recorded. I selected the game, arrowed-down to Stop recording, and this time it stopped recording and didn't crash.

Since I was watching an HD program instead of 4K, I tried the "Info" button and nothing happened. The Harmony One has an IR active indicator when it's transmitting so I know I pressed the button.

It looks like the 2nd or 3rd time I sent "Info" from the Harmony One, the Hopper 3 started to respond again. If I used the Dish 52.0 remote, the Hopper 3 stopped listening to the Harmony One IR commands. It looks like "Info" needs to be pressed twice and that seems to reactivate the IR recognition on the Hopper 3. It seems to stay active, but I didn't try leaving the Hopper 3 alone for an hour or more.
Bobby
As I was testing 4K on my Hopper 3 running H713 10/7/2026 by watching the NLCS Game 2 on Channel 148-01, I had been using my Dish 52.0 remote to navigate. I grabbed my Harmony One and pressed "Info". This caused the Hopper 3 to crash and restart.

After it restarted, the game finished so I pressed "Options" on the 52.0 remote to access the TV Activity screen. I pressed Select on the tuner with the NLCS game active and arrowed-down to select "Stop Recording". Again, the Hopper 3 crashed and restarted.

After it came back up, I used Recall to return to "Maine Cabin Masters" and when I tried the Options button again, I saw that the NLCS Game was still being recorded. I selected the game, arrowed-down to Stop recording, and this time it stopped recording and didn't crash.

Since I was watching an HD program instead of 4K, I tried the "Info" button and nothing happened. The Harmony One has an IR active indicator when it's transmitting so I know I pressed the button.

It looks like the 2nd or 3rd time I sent "Info" from the Harmony One, the Hopper 3 started to respond again. If I used the Dish 52.0 remote, the Hopper 3 stopped listening to the Harmony One IR commands. It looks like "Info" needs to be pressed twice and that seems to reactivate the IR recognition on the Hopper 3. It seems to stay active, but I didn't try leaving the Hopper 3 alone for an hour or more.
I think you have it. If you start up with the Harmony and then use the 54 remote it confuses the Hopper because you went from IR to RF. It seems to get cranky when you want to go back to the Harmony.
R
I think you have it. If you start up with the Harmony and then use the 54 remote it confuses the Hopper because you went from IR to RF. It seems to get cranky when you want to go back to the Harmony.
I checked this and you are correct. My Harmony 665 remote worked fine until my wife used the Dish remote. After the Dish remote is used I have to push or hold a button down until the 665 starts working again.
david_jr
I lost IR control of my H3 after the H398 update in September of 25. We were using the Harmony Hub remote system from Logitech. We have been using the H3 OEM remote to turn the receiver on and off ever since then.

H398 Software Version
BTW my bedroom H3 does not have this problem where I am using a Harmony 650. Also has there been any more feedback? Are they still working on this or what?
Foxbat
I think I have a separate issue with our Hopper 3 when watching/recording a 4K event. I have had many instances of it spontaneously restarting when I "disturbed" it during a 4K event. I learned to not touch the remote after a given point.

But it might be the IR code subroutine and 4K that make it touchy. I'll try it Wednesday night during the NLCS Game 3.
  • Like
Reactions: charlesrshell
JeffN9
I think I have a separate issue with our Hopper 3 when watching/recording a 4K event. I have had many instances of it spontaneously restarting when I "disturbed" it during a 4K event. I learned to not touch the remote after a given point.

But it might be the IR code subroutine and 4K that make it touchy. I'll try it Wednesday night during the NLCS Game 3.
I was having similar issues last night while watching and recording the NLCS game on 148. When I tried resuming the game at one point the screen went blank and I couldn't get my H3 to respond to any remote commands. Eventually the Hopper went to a HD channel but still no remote response. After a while the Hopper went into a re-boot cycle. This happened at least 3 times. I was using an IR universal remote only.

A little frustrating to have the game broken up like that but at least the Brewers won:)
bookworm370
Excellent suggestion.
Yea, I've only been a CIO for the last 30 years! :)
Trust me, when something important breaks, they get to own it!
meStevo
Lifetime Supporter
Last reply · posted in The Chit Chat Club
Continuing the Kilauea thread in the Pub here. Perhaps the Iceland one too next time there's remarkable activity.

Currently there is precursory lava flowing into the crater, leading to the next episode that'll probably start within the next day.

You can see the pace of inflation / deflation here. It serves as the primary predictor for when the expect the eruptions, which coincide w/ inflation turning into significant deflation and last for several hours on average with significant fountaining.



View: https://youtu.be/Uecu2seh4b4


Wife and I like the AfarTV feeds, for the discussion along w/ them, though they're otherwise just mirrors of the official USGS feeds.


View: https://youtu.be/iws3rh5vLAQ
120 Replies · 3264 views
  • Like
Reactions: osu1991
Foxbat
​
  • Like
Reactions: RaiderPower
Foxbat
Oooo, quite the show now. All three vents have doming and overflows. The cone that built up around the North vent lost its upper quarter at 02:50 Oct 17 and is now spewing lava at a healthy rate. Don't know if I would say it's a fountain, but it's close.


IMG_1534.webp

edit: The USGS has called the official start of Episode 55 as starting at 03:19 HST Oct 17, 2026:

Alert Level: WATCH, Color Code: ORANGE 2026-10-17 13:43:56 UTC
HVO/USGS Volcanic Activity Notice

Volcano: Kilauea (VNUM #332010)

Current Volcano Alert Level: WATCH
Current Aviation Color Code: ORANGE

Issued: Saturday, October 17, 2026, 3:43 AM HST
Source: Hawaiian Volcano Observatory
Notice Number: 2026/H488
Location: N 19 deg 25 min W 155 deg 17 min
Elevation: 4091 ft (1247 m)
Area: Hawaii

Summary: Episode 55 of the ongoing Halemaʻumaʻu eruption began at 3:19 AM HST on October 17, 2026.

Volcanic Activity:
Episode 55 of lava fountaining in Halemaʻumaʻu began at the summit of Kīlauea began at 3:19 AM HST on October 17, 2026.

Fountain heights are relatively low at about 100-150 feet (30-45 m), and it is not clear whether this episode will evolve to the same heights as previous episodes. Continuous overflows from the vents began yesterday, October 16, just before 6 a.m. HST and transitioned into episode 55 fountains at 3:19 a.m. HST this morning. The current forecast is for winds are blowing from the north-northeast direction, which suggests that volcanic gas emissions and volcanic material may be distributed to the south-southwest direction from Halemaʻumaʻu.
  • All eruptive vents and lava flows are confined to Halemaʻumaʻu crater within Hawaiʻi Volcanoes National Park. Tephra fall from volcanic ash clouds is greatest within 3 miles (5 km) of the vents, lighter ash and Pele's Hair may stay suspended for large distances from the vents.
Foxbat
Kīlauea seems to be returning to the "normal" eruption script, impressive fountaining from the North Vent. For once, the V2 Cam has the best overall shot:
IMG_1535.webp
The lava flows have covered a good portion of the Halemaʻumaʻu crater floor.
Foxbat
Looks like Episode 55 is over at 09:00 HST, just under six hours. The USGS said the fountains reached 720' or 220 meters.
​
  • Like
Reactions: RaiderPower