Social Feed

T
Last reply · posted in C-BAND Satellite Discussion
Hey Members,

Searching for knowlege. I am trying to rehook up an old mesh dish. Just need some help with wiring. Also, want to know if I have a old mesh dish and and Echostar SRD-4000, would it be worth my wild to set it up. Is there anything I can receive on it Free worth wild?? If so I will need this smart group of people to help me a bit.

Thanks

I have the Echostar manual. When the Dual R6- 6 cable was removed from the receiver the wires were not marked as to where they were removed from. Also, it appears that the ? Sheilded wire (2) have the ends cut off.

I am tracing the wires to the Dish.

Currently, all I have looked at is the Zarl 3018 Actuator Motor. There are 4 wires hooked to it. One Red, One Black, one small black and a small Blue wire. Now here is where I am going to sound really stupid. When I am looking in the box, the top side appears to have the motor, and the bottom part lines up with the arm. Inbetween these, is a strip that the wires connect to.

I need to identify if the part that I call the motor side, it has a little square electronic component that is square and has Green and white wires coming from it. On the opposite side of the of the wire connection, the antenna cable matches up with it. Green to Red and White to Black. Are these the motor connections.

On the bottom part, that lines up with the arm, is that the sensor? If so I think I can figure this out, if I have identified the parts right.
6 Replies · 1728 views
dfergie
Welcome to SatelliteGuys! as Anole says get us a few pictures and we'll do what we can. :)
gabshere
:welcome to the group :)

pictures are you friend here on the site and they help us see and figure out what you have.
for the wiring a picture of the back of the receiver would help and if its not already connected to the dish motor , a picture and name of that motor would help.

would it be worth my wild to set it up. Is there anything I can receive on it Free worth wild??
the receiver you have listed is a analog receiver and there are still a few of those up there but are decreasing with each year. the receiver will mostlikely still move the big dish and by adding a new digital receiver (DVB) it should gain you several more channel options ( see the list )

lots of information here so research , read and ask questions ... we are here to help when needed :)
T
I have the Echostar manual. When the Dual R6- 6 cable was removed from the receiver the wires were not marked as to where they were removed from. Also, it appears that the ? Sheilded wire (2) have the ends cut off.

I am tracing the wires to the Dish.

Currently, all I have looked at is the Zarl 3018 Actuator Motor. There are 4 wires hooked to it. One Red, One Black, one small black and a small Blue wire. Now here is where I am going to sound really stupid. When I am looking in the box, the top side appears to have the motor, and the bottom part lines up with the arm. Inbetween these, is a strip that the wires connect to.

I need to identify if the part that I call the motor side, it has a little square electronic component that is square and has Green and white wires coming from it. On the opposite side of the of the wire connection, the antenna cable matches up with it. Green to Red and White to Black. Are these the motor connections.

On the bottom part, that lines up with the arm, is that the sensor? If so I think I can figure this out, if I have identified the parts right.
gabshere
one coax is for c-band
other coax is for ku ( or not used if no ku present

next cable usually has 5 wires
wire color also wire color
big red big red = motor ( set one way moves east )
big white big black = motor ( these two wires reversed move west)
brown = brown = sensor
green = blue = sensor
orange = grey = not used for you

next cable usually has three small wires ( these control the polarity / servo)
white pulse
black GND
red +5v

need to identify if the part that I call the motor side, it has a little square electronic component that is square
square box is the phyiscal limit switch

Green to Red and White to Black. Are these the motor connections.
your motor connections are the larger black & red wires
red lines up with the big green wire
black lines up withthe big white wire

On the bottom part, that lines up with the arm, is that the sensor?
the round wheel is a magnet wheel (its blue) and off to the left side in the picture slightly below the magnet wheel will be the sensor
it has a grey and a white wire connected to it.


if you haven't moved the dish in a while and it has a grease zerk fitting i would give it some grease first
mbarnes
Texas is a big place. If you are near the DFW area, you can drop an email and maybe I can come by and give you a hand. This looks almost identical to the BUD I just picked up a few weeks ago.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68510 Replies · 2671567 views
  • Like
Reactions: c-spand
H
I LIKE It LIKE THAT-The Dave Clark Five
  • Like
Reactions: ClarkGable
ClarkGable
Five O'Clock World - The Vogues
FTA4PA
Six O'Clock News - John Prine
Bobby
It's Five O'Clock Somewhere - Alan Jackson
harshness
Somewhere - Barbra Streisand
meStevo
Lifetime Supporter
Last reply · posted in The Chit Chat Club
Continuing the Kilauea thread in the Pub here. Perhaps the Iceland one too next time there's remarkable activity.

Currently there is precursory lava flowing into the crater, leading to the next episode that'll probably start within the next day.

You can see the pace of inflation / deflation here. It serves as the primary predictor for when the expect the eruptions, which coincide w/ inflation turning into significant deflation and last for several hours on average with significant fountaining.



View: https://youtu.be/Uecu2seh4b4


Wife and I like the AfarTV feeds, for the discussion along w/ them, though they're otherwise just mirrors of the official USGS feeds.


View: https://youtu.be/iws3rh5vLAQ
119 Replies · 3228 views
  • Like
Reactions: osu1991
Foxbat
​
  • Like
Reactions: RaiderPower
Foxbat
​
Foxbat
Oooo, quite the show now. All three vents have doming and overflows. The cone that built up around the North vent lost its upper quarter at 02:50 Oct 17 and is now spewing lava at a healthy rate. Don't know if I would say it's a fountain, but it's close.


IMG_1534.webp

edit: The USGS has called the official start of Episode 55 as starting at 03:19 HST Oct 17, 2026:

Alert Level: WATCH, Color Code: ORANGE 2026-10-17 13:43:56 UTC
HVO/USGS Volcanic Activity Notice

Volcano: Kilauea (VNUM #332010)

Current Volcano Alert Level: WATCH
Current Aviation Color Code: ORANGE

Issued: Saturday, October 17, 2026, 3:43 AM HST
Source: Hawaiian Volcano Observatory
Notice Number: 2026/H488
Location: N 19 deg 25 min W 155 deg 17 min
Elevation: 4091 ft (1247 m)
Area: Hawaii

Summary: Episode 55 of the ongoing Halemaʻumaʻu eruption began at 3:19 AM HST on October 17, 2026.

Volcanic Activity:
Episode 55 of lava fountaining in Halemaʻumaʻu began at the summit of Kīlauea began at 3:19 AM HST on October 17, 2026.

Fountain heights are relatively low at about 100-150 feet (30-45 m), and it is not clear whether this episode will evolve to the same heights as previous episodes. Continuous overflows from the vents began yesterday, October 16, just before 6 a.m. HST and transitioned into episode 55 fountains at 3:19 a.m. HST this morning. The current forecast is for winds are blowing from the north-northeast direction, which suggests that volcanic gas emissions and volcanic material may be distributed to the south-southwest direction from Halemaʻumaʻu.
  • All eruptive vents and lava flows are confined to Halemaʻumaʻu crater within Hawaiʻi Volcanoes National Park. Tephra fall from volcanic ash clouds is greatest within 3 miles (5 km) of the vents, lighter ash and Pele's Hair may stay suspended for large distances from the vents.
Foxbat
Kīlauea seems to be returning to the "normal" eruption script, impressive fountaining from the North Vent. For once, the V2 Cam has the best overall shot:
IMG_1535.webp
The lava flows have covered a good portion of the Halemaʻumaʻu crater floor.
BlackHitachi
Supporting Founder
Last reply · posted in Movie Talk
Since the Reds have there thread we should too!

Last watched Nine inch Nails
Next 3:10 to Yuma
5390 Replies · 510341 views
osu1991

View: https://youtu.be/9j3vxhzM8MY?is=Rs1cY1FQAiRWi87i


Come September (1961)
Rock Hudson and Gina Lollobrigida with Sandra Dee and Bobby Darin
  • Like
Reactions: dfergie
Y
1791758462355.webp


Simple, charming. Entire premise is quite silly but Cary Grant carries it across the line in good fashion.
T
Last: The Social Reckoning. Spoiler alert, they make Zuck look like a...
Foxbat
Since it was already "paid" for, I spent the two hours of my time watching the John Cena action movie on Apple TV, "Matchbox The Movie" even though the reviews were brutal. It was better than I expected, so I didn't feel like I had wasted an afternoon watching it. But it felt like another "Reacher"/"Neghley"/"Mission: Impossible"/"Fast & Furious" crash and blow stuff up with lots of automatic gunfire mixed in movie featuring covert CIA operatives.

I don't think we'll get a follow-up movie from this. I expect Mattel will have other toy lines to exploit.
Van
Van
Last reply · posted in What's Cooking?
Who says dinner or lunch has to be the only good meals of the day?

Honey butter grits with scrambled eggs and grilled boneless pork ribs on flakey biscuits washed down with cranberry juice.
6629 Replies · 379364 views
dfergie
Egg, sausage and cheese sandwich between bread toasted in butter in skillet... Chocolate milk.
  • Love
Reactions: TRG
dfergie
Egg, sausage and cheese sandwich between bread toasted in butter in skillet... Chocolate milk.
Add fresh hash browns, delete chocolate for milk with a slice of bacon.
  • Like
Reactions: Mr Tony and TRG
TRG
TRG
Bacon, eggs, hash browns and toast. Coffee.
  • Like
Reactions: Mr Tony and dfergie
TRG
TRG
Wound up at the Waffle House this morning. Got the two egg breakfast with coffee.

1622.webp
  • Like
Reactions: dfergie and Mr Tony
dfergie
Speaking of waffles, I'm going to put my mini waffle iron on stove so I'll remember to make waffles in the morning... Had some last week, been awhile.
dfergie
Dos cackleberrys over easy on top of 2 corned beef hash patties fried in skillet... Chocolate milk.
  • Like
Reactions: Bobby
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
Anyone making their own breakfast sausage? I've recently been trying different recipes, found some I like, some I've modified...
38 Replies · 3561 views
  • Like
Reactions: spongella
navychop
Bob Evans Sage.
R
Bob Evans Sage.
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
  • Like
Reactions: navychop
dfergie
Swaggerty's isn't too bad, sausage prices are lower per lb than making my own from pork butts right now so I've been buying JC Potter or Owen lately.
(Swaggerty's at Sam's is pre cut, I usually partially freeze the rolls and cut with my slicer and vacuum seal on parchment paper)
  • Like
Reactions: navychop
S
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
amazon maybe :what
S
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
owens on amazon is 54.99 for a 4 pk 16 oz a sausage. i feel that's kind of steep!!!
S
Swaggerty's isn't too bad, sausage prices are lower per lb than making my own from pork butts right now so I've been buying JC Potter or Owen lately.
(Swaggerty's at Sam's is pre cut, I usually partially freeze the rolls and cut with my slicer and vacuum seal on parchment paper)
id'e rather make my own vs store bought.
  • Like
Reactions: dfergie
R
owens on amazon is 54.99 for a 4 pk 16 oz a sausage. i feel that's kind of steep!!!
Especially when I can get a two pound roll of Jimmy Dean from Sam's Club for $7.38.
dfergie
They run Owens at $3.99 for lb and $7.99 a couple times a month at some grocery stores here, I actually was wrong, just checked a pork sirloin roast it was $1.99 a lb. (cooked it yesterday so pack was in trash)
  • Like
Reactions: reubenray
TheRatPatrol
Last reply · posted in TV Shows
Anyone else watch this show? Any guesses as to what was in the box Gibbs gave to Abby that was on her desk? It look liked it was glowing.

I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?
2134 Replies · 214759 views
Jimbo

Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
  • Like
Reactions: Howard Simmons
Howard Simmons
Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
Tony as the director.🙄
Jimbo
Tony as the director.🙄
Would you rather have LaRoche ???
  • Like
Reactions: Howard Simmons
dfergie
I liked this episode and a toned down Tony...
  • Like
Reactions: Jimbo
Howard Simmons
Would you rather have LaRoche ???
No. Bring in someone new.🤔 Tony is not serious enough for me. Parker is too close to the team and Tim is too young to take over IMO.
Jimbo
No. Bring in someone new.🤔 Tony is not serious enough for me. Parker is too close to the team and Tim is too young to take over IMO.
I don't think Tim and Tony are that far apart in Age ...

Remember what Tony said to Tim when they first got back together ...
Tony said: I am the New Tony, Tim .... (something to that effect)

Tony has changed, he's been running his Security Business ... I'm sure he has grown up.

Give it time ... your judging the New Tony from the old Tony.

It sounds like Tim won't be around the Team much longer either.
KAB
KAB
I wonder it they will show the teased meeting (in Origins) with Tony and Gibbs.
  • Like
Reactions: reubenray
Jimbo
I wonder it they will show the teased meeting (in Origins) with Tony and Gibbs.
I'm curious how they are going to implement Tony into Origins (If they do) ...
Tony was introduced to Gibbs and the team, on NCIS, which makes it the Mothership side of things, he worked in Baltimore prior to NCIS, NO mention when they met that anyone had known one another ...