ok the reason i asked is this is the way you hook up c-band & ku to the 550
one coax = c ( band)/H the other coax =Ku / V
so its possible that you have one c-band lnb for Horizontal and another for Vertical
or its possible that you have a c & ku lnbf
If you have both c band lnb one H & one V or c & ku feedhorn:
if you are wanting to keep your analog channels ( connected to the 550 ) then you could use a splitter. and then diesqc the two c-band lnbs together with whatever you already have connected to the satworks receiver.
If you have both c band lnb one H & one V or c & ku feedhorn:
and you don't watch analog channels anymore then no splitter is needed just use the diesqc switch.
the limit here is the gi550 (for using the loop out)
both units have the ability to control the servo power
the gi550 can move the dish
the satworks will need the multiple coaxes diesqced together for them all to work ( or you would have to connect them one at a time when changing) and the gi550 can't understand or decipher the coaxes once they are diesqced together.
lnb model # would help also pictures help
and since i didn't mention it before

to the site