Tomorrow I'll be able to get up there and get a part number so I will know exactly what LNB I have.
You can tell by looking at the D-500 dish:
- two independent one-bird LNBs
(very old, useful, what's called Legacy)
- double bird LNB, no apparent markings (ignore the molding on the front side)
(old, useful, legacy switch you probably cannot control. 2 or 4 coax connectors)
- double bird LNB, with big "dp" sticker on front side (Dish Pro)
(newish, useful, bandstacked. 2 or 4 coax connectors)
- double bird LNB, with "dpp" sticker on front side (Dish Pro Plus)
(newest, maybe useful, draws lots of current, THREE connectors - one is input for expansion)
All the Dish Pro or Dish Pro Plus respond to diseqc commands.
If you plug into the correct connector, and do NOT command the units, you can probably get by just fine.
The plain jane units respond to some archaic command protocol, which isn't worth discussing in this thread.
Last night I sat down and started a Visio flowchart that includes all my electronics by the TV (game systems, DVD, etc.) and also have my FTA and OTA setup connections included.
You might want to make the FTA equipment on a separate page.
It's likely to get changed often. -
