Social Feed

M
Last reply · posted in Free To Air (FTA) Discussion
Hello, as the title says I'm new to fta but not to Satelliteguys. I been thinking about getting a fta system, well today I did. Got if from Gold sponsor GOsatellite.

I bought the "nfusion HD with the 8PSK" plus the dish 36" and the SG2100 motor and a few other things too. When it comes I'll take some pic's and post them for all to see, and write a review about it too.

But I know I am in the right spot if I need help with any help during setup and down the road. Thanks to members such as Iceberg and many other's.

So time to start down the path of FTA.

Musher
14 Replies · 2447 views
T
I hope you know the Nfusion is a iks pirate receiver, the board is most probably to pull in Dish nets patented turbo fec feeds, I would have to say the dish and motor are great but you should have reviewed receivers a bit more before purchasing.
M
turbosat, will be working on putting the dish and other things up in the next couple of day's. Everything I need came today.

tdti1, I did look into the receiver and what you are saying is true but wanted something different. I thought about the Pansat 9200 HD but went with the nfusion.

We'll see what and how well it work's sometime over the weekend.
Musher
M
Well got everything up now and now is where I need some help. The motor will not move, it does have a Reset Button on it also I'm not sure about the Elevation is right will get some pic's to post of the setup.

Lat 88.7 Lon 43.2 Motor Elv. 43 Declation is 6.6 so does that mean the dish elevation should be 36 cause some web things say 23. so any input will only help.

Musher

Update: The Motor is now moving east to west and back but I think it is the Elevation cause I'm getting some signal strenght of 37% but no signal quailty. I did get some pic's The Motor move very well using Diseqc 1.2.
A
Was there 2 weeks ago

Musher

You are where I was 2+ weeks ago, as it stands now I can scan from 82 to 119 and every sat in between.

There is an ark in the sky (sat position) that you need to match with your set up.

Envision a 180 degree semi circle going from east to west. now all those sats are along that line (that is why your truest south sat will have the highest elevation)

I know this may sound Greek now, but read and it will come to you, cut 2 180 degree semi circles out of paper, put dots along it ( to represent the sats) then miss-align those arks and you will see why you can pick up some sats and not others.

As a New Guy and seeing you have the exact dish I have, here were my down falls.

"True South" it's tough to find, setting the 30 degrees on the dish it's self and the elevation.

For me, I got closer to "True South" once I removed rare earth magnet (for RC planes) motors to the shed.

On that dish you have, to get it parallel, measure the distance from the back of the dish to the movable bracket on the top and bottom (making them match).

Once you have the motor at 0 degrees, you have to make sure the dish is at 0 degrees too. I measured from the side support to the back of the mounting bracket, I made both sides equal.

Now (depending on the rx), my Coolsat 5000 does NOT have the strongest transponders programed in to it, and when scanning for a sat, you may be looking for a frequency that does not exist on that sat, meaning you will miss that sat, read my son READ.

For true south vs elevation, if you can goto 82 and get a stronger signal when you put slight doward pressure on the dish,yet when going to 119 you have to use upward pressure then you know you are a degree or 2 too far to the east, YET if you have to use upward or down ward on both sats then it is a simple elevation adjustment.

I know alot to asorbe (because I'm still trying myself), stick with it as I found TODAY, I now have the widest range I have had to date.

I posted about buying this Coolsat rx and spending $5 for it then having to spend $250 to make it work, I asked if this was how "It all started" and I was told "Yes".

Well the next few days of my vacation were rainy (not a good time to align) so I went online to find things out, I was amazed.

When we talk about the old CBs, HAM raidos, it was all about the "QUEST", I was very into that quest. I viewed this FTA as a continuation of that quest,
then I found these,

Watch Live Online TV Channels - USA
Live Channels - Entertainment - Most Popular - English - Justin.tv
The best site for movies - Watch and Download free Hollywood movies, Asian Movies, Asian Drama, Korean Movies, Japane Movies, Taiwanese Movies, Chinese Movies
http://www.hulu.com/tv
TidalTV | Watch TV online. For free.
OVGuide Online Video Guide: Watch Free Movies, Streaming Videos, Watch TV Shows, Video Games - It's what's ON the Web

I will tune my set up to be the best it can be then it may just rust away, in the "Few" links I posted above vertaually everything (and then some)I can get via FTA, I can get online free as well.

Talk about being at a cross roads:D, have fun

AFM
zamar23
Musher

Can you post your 8 psk board full chip models, as printed on its each chip?

AFineMan

82 to 119 is the very small portion of Clarke Belt you referred to.
When you suggest online programming in place of FTA, it would help to add, what max screen size & resolution you get online, what is the compression method used for online programs, what are required min internet connection speed and PC specs to get similar in picture quality programming as Nfusion HD delivers.
meStevo
Lifetime Supporter
Last reply · posted in The Chit Chat Club
Continuing the Kilauea thread in the Pub here. Perhaps the Iceland one too next time there's remarkable activity.

Currently there is precursory lava flowing into the crater, leading to the next episode that'll probably start within the next day.

You can see the pace of inflation / deflation here. It serves as the primary predictor for when the expect the eruptions, which coincide w/ inflation turning into significant deflation and last for several hours on average with significant fountaining.



View: https://youtu.be/Uecu2seh4b4


Wife and I like the AfarTV feeds, for the discussion along w/ them, though they're otherwise just mirrors of the official USGS feeds.


View: https://youtu.be/iws3rh5vLAQ
118 Replies · 3215 views
  • Like
Reactions: osu1991
meStevo

View: https://youtu.be/tv37YPVfHME


Gemini summary:

In this video from Shawn Willsey: Geology Explained, geology professor Shawn Willsey details rapid subsurface and surface changes at Kīlauea volcano in Hawaii:
  • Signs of a Magma Intrusion (Dike): Summit tiltmeters recorded an unprecedented, rapid inflation spike of around 45 microradians [04:00 Opens in a new window ], accompanied by a dramatic surge of over 100 shallow earthquakes within 24 hours (peaking at a magnitude 3.4) [01:44 Opens in a new window ]. The deformation indicates that magma is intruding in an east-west orientation beneath the southern caldera/Halemaʻumaʻu region [01:16 Opens in a new window ].

  • No Rift Zone Migration: Tilt and seismic data confirm magma is remaining confined to the summit area rather than traveling down the East Rift Zone [02:40 Opens in a new window ].

  • Structural Pathways: Willsey notes that pre-existing faults and fractures expanded during the 2018 caldera collapse [08:32 Opens in a new window ]. Because these fracture zones remain unsealed, magma can move and mobilize toward the surface much faster than before [10:17 Opens in a new window ].

  • Potential Outcomes: The intrusion could stall underground without erupting, or it could feed a new east-west fissure eruption inside the summit caldera, similar to the September 2023 event [02:47 Opens in a new window ].

  • Shift to Dome Overflows: Webcam footage from overnight reveals repeated pulses of fluid lava overflowing the spatter cone at the North Vent [11:42 Opens in a new window ]. Occurring roughly every 20 to 50 minutes and lasting several minutes each [12:36 Opens in a new window ], these cyclic overflows suggest Kīlauea may be transitioning away from high-fountaining episodes toward regular surface overflows [14:54 Opens in a new window ].

Foxbat
​
  • Like
Reactions: RaiderPower
Foxbat
​
Foxbat
Oooo, quite the show now. All three vents have doming and overflows. The cone that built up around the North vent lost its upper quarter at 02:50 Oct 17 and is now spewing lava at a healthy rate. Don't know if I would say it's a fountain, but it's close.


IMG_1534.webp

edit: The USGS has called the official start of Episode 55 as starting at 03:19 HST Oct 17, 2026:

Alert Level: WATCH, Color Code: ORANGE 2026-10-17 13:43:56 UTC
HVO/USGS Volcanic Activity Notice

Volcano: Kilauea (VNUM #332010)

Current Volcano Alert Level: WATCH
Current Aviation Color Code: ORANGE

Issued: Saturday, October 17, 2026, 3:43 AM HST
Source: Hawaiian Volcano Observatory
Notice Number: 2026/H488
Location: N 19 deg 25 min W 155 deg 17 min
Elevation: 4091 ft (1247 m)
Area: Hawaii

Summary: Episode 55 of the ongoing Halemaʻumaʻu eruption began at 3:19 AM HST on October 17, 2026.

Volcanic Activity:
Episode 55 of lava fountaining in Halemaʻumaʻu began at the summit of Kīlauea began at 3:19 AM HST on October 17, 2026.

Fountain heights are relatively low at about 100-150 feet (30-45 m), and it is not clear whether this episode will evolve to the same heights as previous episodes. Continuous overflows from the vents began yesterday, October 16, just before 6 a.m. HST and transitioned into episode 55 fountains at 3:19 a.m. HST this morning. The current forecast is for winds are blowing from the north-northeast direction, which suggests that volcanic gas emissions and volcanic material may be distributed to the south-southwest direction from Halemaʻumaʻu.
  • All eruptive vents and lava flows are confined to Halemaʻumaʻu crater within Hawaiʻi Volcanoes National Park. Tephra fall from volcanic ash clouds is greatest within 3 miles (5 km) of the vents, lighter ash and Pele's Hair may stay suspended for large distances from the vents.
Van
Van
Last reply · posted in What's Cooking?
Who says dinner or lunch has to be the only good meals of the day?

Honey butter grits with scrambled eggs and grilled boneless pork ribs on flakey biscuits washed down with cranberry juice.
6629 Replies · 379357 views
dfergie
Egg, sausage and cheese sandwich between bread toasted in butter in skillet... Chocolate milk.
  • Love
Reactions: TRG
dfergie
Egg, sausage and cheese sandwich between bread toasted in butter in skillet... Chocolate milk.
Add fresh hash browns, delete chocolate for milk with a slice of bacon.
  • Like
Reactions: Mr Tony and TRG
TRG
TRG
Bacon, eggs, hash browns and toast. Coffee.
  • Like
Reactions: Mr Tony and dfergie
TRG
TRG
Wound up at the Waffle House this morning. Got the two egg breakfast with coffee.

1622.webp
  • Like
Reactions: dfergie and Mr Tony
dfergie
Speaking of waffles, I'm going to put my mini waffle iron on stove so I'll remember to make waffles in the morning... Had some last week, been awhile.
dfergie
Dos cackleberrys over easy on top of 2 corned beef hash patties fried in skillet... Chocolate milk.
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
Anyone making their own breakfast sausage? I've recently been trying different recipes, found some I like, some I've modified...
38 Replies · 3552 views
  • Like
Reactions: spongella
navychop
Bob Evans Sage.
R
Bob Evans Sage.
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
  • Like
Reactions: navychop
dfergie
Swaggerty's isn't too bad, sausage prices are lower per lb than making my own from pork butts right now so I've been buying JC Potter or Owen lately.
(Swaggerty's at Sam's is pre cut, I usually partially freeze the rolls and cut with my slicer and vacuum seal on parchment paper)
  • Like
Reactions: navychop
S
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
amazon maybe :what
S
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
owens on amazon is 54.99 for a 4 pk 16 oz a sausage. i feel that's kind of steep!!!
S
Swaggerty's isn't too bad, sausage prices are lower per lb than making my own from pork butts right now so I've been buying JC Potter or Owen lately.
(Swaggerty's at Sam's is pre cut, I usually partially freeze the rolls and cut with my slicer and vacuum seal on parchment paper)
id'e rather make my own vs store bought.
  • Like
Reactions: dfergie
R
owens on amazon is 54.99 for a 4 pk 16 oz a sausage. i feel that's kind of steep!!!
Especially when I can get a two pound roll of Jimmy Dean from Sam's Club for $7.38.
dfergie
They run Owens at $3.99 for lb and $7.99 a couple times a month at some grocery stores here, I actually was wrong, just checked a pork sirloin roast it was $1.99 a lb. (cooked it yesterday so pack was in trash)
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68508 Replies · 2671497 views
  • Like
Reactions: c-spand
EatMyVolts
Smoke! Smoke! Smoke! (That Cigarette) -- Tex Williams
long_time_Dish
Don't Do Me Like That - Tom Petty & The Heartbreakers
H
I LIKE It LIKE THAT-The Dave Clark Five
  • Like
Reactions: ClarkGable
ClarkGable
Five O'Clock World - The Vogues
FTA4PA
Six O'Clock News - John Prine
TheRatPatrol
Last reply · posted in TV Shows
Anyone else watch this show? Any guesses as to what was in the box Gibbs gave to Abby that was on her desk? It look liked it was glowing.

I also heard that someone was leaving the show at the end of this season. Any guesses as to who thats going to be?
2134 Replies · 214750 views
Jimbo

Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
  • Like
Reactions: Howard Simmons
Howard Simmons
Howard ...
You don't like Tony, or Tony as the Director (he's only been there for 30 seconds now) or you don't like NCIS ?
Tony as the director.🙄
Jimbo
Tony as the director.🙄
Would you rather have LaRoche ???
  • Like
Reactions: Howard Simmons
dfergie
I liked this episode and a toned down Tony...
  • Like
Reactions: Jimbo
Howard Simmons
Would you rather have LaRoche ???
No. Bring in someone new.🤔 Tony is not serious enough for me. Parker is too close to the team and Tim is too young to take over IMO.
Jimbo
No. Bring in someone new.🤔 Tony is not serious enough for me. Parker is too close to the team and Tim is too young to take over IMO.
I don't think Tim and Tony are that far apart in Age ...

Remember what Tony said to Tim when they first got back together ...
Tony said: I am the New Tony, Tim .... (something to that effect)

Tony has changed, he's been running his Security Business ... I'm sure he has grown up.

Give it time ... your judging the New Tony from the old Tony.

It sounds like Tim won't be around the Team much longer either.
KAB
KAB
I wonder it they will show the teased meeting (in Origins) with Tony and Gibbs.
  • Like
Reactions: reubenray
Jimbo
I wonder it they will show the teased meeting (in Origins) with Tony and Gibbs.
I'm curious how they are going to implement Tony into Origins (If they do) ...
Tony was introduced to Gibbs and the team, on NCIS, which makes it the Mothership side of things, he worked in Baltimore prior to NCIS, NO mention when they met that anyone had known one another ...