Social Feed

Main Feed My Feed
C
Cavill.Chris
Last reply · posted in DISH Network Support Forum

Does this seem reasonable?

Hi, I am a new member, and would like to pose a question, mainly to dish network installers. I used to install for dish network, and am looking to leave my current filed (graphic design) and get back to putting up dishes...
I posted an ad on craigslist as follows (below), with the hope that someone would contact me and we could get started. I thought my offer seemed reasonable, but I am getting no responses. Generally, Craigslist is a great place for things like this... so please read below and let me know if:

>what I am asking seems fair
>what I am asking is allowed (I guess I just assumed that since you were using your own vehicle, you could take a ride-along if you wanted)
>And I guess most importantly, if maybe anyone here would be interested (I am located in Metro Detroit).

So here is a copy of the ad:

My name is Chris, 26 y/o. I used to be an Installer for Dish Network (DNSC - 1 year +), and I also have cable experience (Comcast - 1 year +). I did this while going to school, and when I finished school I left to pursue my "career", long story short - I am looking to get back into installing. I need a contractor or sub-contractor for Dish Network to shadow on Saturdays or Sundays for a couple of weekends (as I still have a mon-fri job) just to brush up. I have been out of this for a while and I am certain that the technology has changed dramatically. I am still familiar with the installation process, and have several of the necessary tools, such as a cordless hammer-drill, wrenches, wire strippers, crimpers for fittings, toner, etc, but I would need to have access to your meter and and other necessities.
I am not asking for any compensation, just an opportunity to ride along, help with installs, and refresh some old skills while picking up some new ones. I am a fast learner, good with heights and tight spaces (as I mentioned, I've done this before), I can handle ladders, and am not a liability.
So, I ride with you, you get installs done quicker ( 1/2 the time ) while "training" me... sounds like a fair trade. Have me do the s$%t work, wall fishes, crawl spaces, attics, whatever, but let me do the technical stuff too... site survey, dish assembly and mounting, tuning, receiver hook-up... etc.
If this is something you might be interested in, shoot me an email with some info... name, phone number, how long you've been an installer, who you work for, what areas you work in, etc... and we can get in touch.
Again, you can consider this FREE HELP on the weekend, I just need to get my hands dirty and pick your brain a bit between jobs- go over receivers, new install standards, the specifics of offering contract install work.
I am polite, customer oriented, and responsible. I just ask that whoever contacts me be the same. Long hours OK (comes with the job, right?!)

Thanks,
Chris
734.344.0583 (after 6pm)

Sorry for the long post, but any advice would be appreciated, also, if this is not the most appropriate place to post this, then I apologize, and would be happy to move it, or have it moved by admin.

Thanks guys.
you can reach me by the number listed above, on AIM (my handle is: ChristopherLWA ) or by email.
Read more
9 Replies · 1839 views
Load Replies (9) Reply Legacy View
Claude Greiner
Claude Greiner
Thanks for the reference, the only issue is that my guys don't work Saturdays and Sundays. We do mostly commercial installs during the week, and send all the residential work over to DNS.
Read more
Reply
C
Cavill.Chris
Thanks for all the input guys. I will keep the search going.
If anyone else has any helpful ideas or suggestions I appreciate it.

In response to navychop:

"With the economy as it is, I don't see it likely that you will get any interest."

Respectfully, I dont really see what the economy has to do with it. I am not asking for any pay. Perhaps then, they are worried that someone like me will come in and "steal" work from their pocket? Doubtful... I seriously dont think that people look at it that way.
Could you please clarify what you mean?

Also:

"And they'll be suspicious."

Huh? Suspicious of what?....I clearly stated my motives, and gave several means of contact. I dont see what there is to be "suspicious" of.

I have read threads on here of guys taking their kids, as young as 6 years old, out on installs with them.. is it really that far-fetched to think that someone might take along a competent 20-something with prior experience?
Im not looking to steal anyones job or pay, nor is my intent by any means malicious or devious. Id just feel better, personally, walking into my local DNSC, resume in hand, or Buying an Van and applying as a contractor, having done something RECENTLY, as opposed to some experience I had years ago, when clearly the technology has evolved and/or changed in some fashion.
Just me though....

I apologize if this seems hostile or argumentative.. as that was certainly not my intent. But if the reasons stated above are really the reasons I have not gotten any bites, then some clarification as to the the points made above would be greatly appreciated.
Read more
Reply
Bob Haller
Bob Haller
My business repairs school machines mostly laminators.

If someone contacted me offering to work for free from my area I would be instantly suspicious!

But I have trained people over the years all from other areas of the country.

have a friend with another business who had someone offer what you are.

they went on to steal a significant part of her customers.

not that you would but others have pulled stuff like this in the past

you may be better off to find someone from far away. besides all the liability issues if you got hurt, from falling off a ladder, to brushing by a electric meter, thats ancient and bad,

you just touch it and housefire starts..........
Read more
Reply
navychop
navychop
I work for a service company, different field. Bob has given good comments.

Something for nothing?

A field where there is danger, especially for someone whose training you are unsure of? Risk to them, your employees, and even the customer.

Equipment and customers at risk, and the possibility that customers could be "checked out" for a later "return visit?"

No need to take on such a risk, with little payback. We don't need more labor. We need more business. Too many customers have put off major work. We've done better than our competitors, but it's caught up with us. For the first time in the company's history, we've had to lay off a few people all at once due to lack of work.

I just don't see too many people out there looking for more workers, even for free.
Read more
Reply
L
lownote2
I used to see a lot of ads from companies on craigslist looking for installers. Right now things are a lot slower for both satco's. Over the past couple of months I've hardly seen anything around here.

Most companies I know post ads looking for help, but rarely actually look through craigslist to find help, so that could also be part of your problem. If you really want to get back into installing you're going to have to go knock on doors in your area and pursue work that way.

Good luck to you
Read more
Reply
View all replies (9)
Bruce
Bruce
Supporting Founder Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum

How things have changed

I was reading this article

thehill.com

Cable TV ‘cord-cutters’ became the majority in 2022

The steady decline of cable and broadcast television, and the rise of streaming services, reached a sort of inflection point over the past year. Last summer, for the first time, streaming ser…
thehill.com thehill.com

That said this-
Last summer, for the first time, streaming services like Netflix and Amazon Prime claimed the largest share of the television viewing audience, surpassing both cable and broadcast TV. Streaming captured 34.8 percent of July viewers, according to Nielsen data, compared to 34.4 percent for cable and 21.6 percent for broadcast.

And then, sometime in the second half of 2022, cord-cutters became the majority. The share of cable and satellite television subscribers dipped to 48 percent, according to a report from Samba TV, a television technology company.

Now I do not consider those with YTTV and the likes, Cord Cutters, but they still do not have Traditional Cable/Satellite delivered Live TV, so I decided to do the math.

There are, now, 129 Million Households in the United States.

In 2015, there were 100 Million Cable/Sat Subscribers , no streaming Live TV Service.

Today, there are 66 Million Live TV subscribers, including Cable, Satellite and Streaming.

Roughly, Streaming Live TV has 14 Million subs including all of them.

So that means, Cable/Satellite now has, roughly, 51 Million Households

So in just 8 years, lost 49% of their subscribers and by the end of this year, expected sub count to be, roughly, 45 million households.

That means a total loss of 55% since 2015 at the end of 2023.

But out of 129 Million households, 45 million will mean only 35% will get Cable/Satellite Delivered Live TV by the end of 2023.

Imagine what 2024 will be like.
Read more
901 Replies · 72991 views
Load Replies (901) Reply Legacy View
  • Wow
Reactions: MikeD-C05
Jimbo
dishstaller
dishstaller
Jimbo said:

View: https://www.youtube.com/shorts/u4rACh-Tt5k?feature=share
Click to expand...

Funny thing is that as the screen size and pic quality increase, the quality of the programming has DEcreased.
Read more
Reply
  • Sad
Reactions: Jimbo
MikeD-C05
dishdude
dishdude
MikeD-C05 said:
skipped the OLED Tv entirely?
Click to expand...

AI slop
Read more
Reply
  • Like
Reactions: Foxbat and MikeD-C05
Bruce
Bruce
According to industry figures reported by Sports Media Watch, this year's World Series averaged 11.69 million viewers on FOX, down 26% from the 15.71 million average the 2025 series delivered.
Read more
Reply
Jimbo
Jimbo
Bruce said:
According to industry figures reported by Sports Media Watch, this year's World Series averaged 11.69 million viewers on FOX, down 26% from the 15.71 million average the 2025 series delivered.
Click to expand...
That thier own stupidity ...

They make it hard to find the game when its on FOX 1 game, then FS1, then on Tru or some other little ity biyy channel that people rerely watch and can't find. (I don't know if FOX is TRU or not, but thats what I'm saying, they put games on obscure channels and expect people to easily find it and watch.
Read more
Reply
View all replies (901)
TFLEV
· posted in TFLEV

2027 Jeep Recon Review - So Fun…So Flawed!

Time for another AWESOME video from TFL Electric Vehicles!


View: https://www.youtube.com/watch?v=T7yHkohaRjA


Direct YouTube Link - 2027 Jeep Recon Review - So Fun…So Flawed!
Read more
0 Replies · 3 views
Replies Reply Legacy View
KAB
KAB
Pub Member / Supporter Lifetime Supporter
· posted in DISH Network Support Forum

Green Dot on WJ4?

Wireless Joey 4. Yesterday, I noticed a little green dot on a small black field in the upper right hand corner of the screen, regardless of channel, recordings, etc. A restart got rid of it, but I am curious as to what It meant and what I did to get it there.
Read more
0 Replies · 8 views
Replies Reply Legacy View
Scott Greczkowski
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
Read more
68786 Replies · 2688464 views
Load Replies (68786) Reply Legacy View
  • Like
Reactions: c-spand
long_time_Dish
long_time_Dish
My Maria - Brooks & Dunn
Read more
Reply
  • Like
  • Love
Reactions: ClarkGable, dishstaller, RaiderPower and 1 other person
RaiderPower
long_time_Dish
long_time_Dish
Don't Lose My Number - Phil Collins
Read more
Reply
H
hwkn
Rikki DON'T LOSE That NUMBER-Steely Dan
Read more
Reply
  • Like
Reactions: ClarkGable
ClarkGable
ClarkGable
Longer - Dan Fogelberg
Read more
Reply
View all replies (68786)
G
Gray Hair
Lifetime Supporter
Last reply · posted in Computers and Gadgets

Repair DX100 American Electrola Radio, AM FM SW?

I have a DX100 American Electrola Radio, AM FM SW. It is a receiver only, which quit working many years ago. Several years ago the seller had stated that capacitors would need replaced because they go bad.

In this particular xxx://www.youtube.com/watch?v=3zUbXgNT8Oo they mentioned the backup battery being the problem.

Several years back when asking about having the capacitors replaced one former repairman said send it back to the factory, well there is not any. Another response several years ago from a person who repaired circuit boards for industry said they could repair it if they had a schematic, again I do not have.

This radio was built in Pittsburgh, PA out of as many American parts as they could find. Your thoughts on getting the radio to work?
Read more
24 Replies · 8282 views
Load Replies (24) Reply Legacy View
D
deheza
I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.
Read more
Reply
  • Like
Reactions: Gray Hair
G
Gray Hair
deheza said:
I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.
Click to expand...

Deheza,

Thanks for your information and offer. My Radio is actually a DXC 100 as well, was a typo in the title. Am puzzled by yours not having the battery, since they only made two runs. While the schematics would be great, I believe by the amount of views it would be better to post all the information here.

I see where numerous people have posted pdf files, just not sure how they do it.

Sorry about the long response time, just was not sure how to handle it.

Thanks,

Respectively,

Gray Hair
Read more
Reply
. Raine
. Raine
If you change that diode, make sure you know what type it is, a regular rectifier, zener, whatever, don't just throw any old diode in. Try to read the number on it and look it up. Do you have a multimeter? A lot of the things in there can be easily checked with a meter.

Trying to run it off a clean 12 V source like a battery would be a good idea, like someone else suggested. In a couple of your pictures there's a 9v regulator [7809CT], and I think I saw a 5 V regulator [7805]. The 5v probably supplies the display and the 9v the radio circuitry. If you have a meter that would be a first place to check, check the three pins on each for a 12v input, a gnd, a 5v output on the 5v and a 9v output on the 9v. Bad solder connections is another good possibility.

That radio looks to be in nice shape inside. It doesn't look like anyone's worked it over, looks nice.

The back-up battery is probably just for a memory function, when you replace it make sure you use the same type, cadmium, lithium-ion, whatever it is, it should say on it what type it is and the voltage, or have a part# that can be looked up.
Read more
Reply
  • Like
Reactions: Gray Hair
O
OZ65
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA
Read more
Reply
Revenerd
Revenerd
Another necropost here. I picked one of these up today. Does anyone out there have this manual (I'd take schematics too). I too found azenithnut's post with the missing pages 16 and 17.
Read more
Reply
(((Garyd)))
(((Garyd)))
OZ65 said:
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA
Click to expand...
Can you send the serial-number label and photos of the tuner board, that should help distinguish its circuit revision; collector records say serials marked OB were the second production run. Use a heat gun or hair dryer to find bad caps if it works for A FEW SECONDS ITS A BAD CAP, THAN ONLY HEAT HALF OF THE RADIO
Read more
Reply
View all replies (24)
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

This Week in Tech 1109

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/watch?v=okJLytKRbDY


Direct YouTube Link - This Week in Tech 1109
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 48 views
Replies Reply Legacy View
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network

The Agentic Web & When AI Agents Escape Their Sandbox

Time for another AWESOME video from the TWIT Network!


View: https://www.youtube.com/shorts/rwJNDSWjwDY


Direct YouTube Link - The Agentic Web & When AI Agents Escape Their Sandbox
TWIT's Website
TWIT Live Feed
Read more
0 Replies · 46 views
Replies Reply Legacy View
G
garyreno
Last reply · posted in DISH Network Support Forum

Updated to H715 on a Hopper 3 from H713

After a strange reboot last night in the middle of viewing, this morning several more reboots and about a half an hour download.
Read more
3 Replies · 282 views
Load Replies (3) Reply Legacy View
  • Like
Reactions: Almighty1, reubenray and LQQK
Almighty1
Almighty1
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
Read more
Reply
  • Like
Reactions: charlesrshell
jsmit86
jsmit86
Almighty1 said:
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
Click to expand...
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Read more
Reply
  • Like
Reactions: Almighty1, reubenray and charlesrshell
Almighty1
Almighty1
jsmit86 said:
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Click to expand...
Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?
Read more
Reply
  • Like
Reactions: charlesrshell
Ramy
Ramy
Supporting Founder
Last reply · posted in The Sports Section

2026-27 NCAA College Football

Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
Read more
190 Replies · 3643 views
Load Replies (190) Reply Legacy View
  • Haha
Reactions: Mike0616
Ronnie-
Ronnie-
The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.


Roll tide.
Read more
Reply
Jimbo
Jimbo
Ronnie- said:
The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.


Roll tide.
Click to expand...
With Streaming, they should all be able to be on at night, no issue with TV slots :(

(Everybody can be on Peacock ... :argue:mad:) :tombstone
Read more
Reply
Ronnie-
Ronnie-
Jimbo said:
With Streaming, they should all be able to be on at night, no issue with TV slots :(

(Everybody can be on Peacock ... :argue:mad:) :tombstone
Click to expand...
Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.


You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.


Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.


None of them was going to be a streaming only game, and none where going on an "alternate" channel.
Read more
Reply
Jimbo
Jimbo
Ronnie- said:
Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.


You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.


Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.


None of them was going to be a streaming only game, and none where going on an "alternate" channel.
Click to expand...
Of course ... but they Could.

Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.
Read more
Reply
Ronnie-
Ronnie-
Jimbo said:
Of course ... but they Could.
Click to expand...
Yes. I even said so. But for reasons I gave, they won't. Wouldn't make sense for them too and they would lose money. A lot of these people that watch one of these games, watch more than one.

They want those eyeballs on as many games as possible. It just makes financial sense.

Jimbo said:
Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.
Click to expand...
It was early. Sure.
Read more
Reply
View all replies (190)
dfergie
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?

What's For Lunch?

We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
Read more
5453 Replies · 337026 views
Load Replies (5453) Reply Legacy View
TRG
TRG
Tuna salad sandwich on toasted honey whole wheat bread with a handful of kettle chips. Water.
Read more
Reply
  • Like
Reactions: Bobby
TRG
TRG
Breakfast for lunch. Crispy corned beef hash, home fries, two over easy eggs and sourdough toast.

1653.webp
Read more
Reply
  • Like
Reactions: dfergie, osu1991 and Bobby
TRG
TRG
Grabbed a burrito on the run. Beef, pinto beans, green chile and cheese. Stewart's cream soda.

burr.webp
Read more
Reply
  • Like
Reactions: Mr Tony and dfergie
dfergie
dfergie
Beef, bean green chile, cheese homemade burritos here... Water
Read more
Reply
  • Like
Reactions: TRG
dfergie
dfergie
Juicy Lucy jalapeño burger… Tea
Read more
Reply
  • Like
Reactions: TRG
View all replies (5453)
Load More
Top
Back