Thanks all, for the valuable input!
So far, I've been doing like you say Skyscanner, I'm right there anyways, and the K2HD
only takes about 15 secs to reboot. The G-Box simply goes into stand-by when
the STB's power is cut.
Corrado and updatelee, what I mean by "cut the power", is to shut it off at the back of the box. Sorry for not being more concise at first.
B.J., I pulled the switch and did some VOM tests. The three connectors on the switch
share the same ground, no shorts occur where the LNB power source is concerned.
The switch is "break then make", but while the "break" is made from the receiver, the
two antenna inputs are both momentarily shorted to ground.
Now, can this be a problem for the LNBs?, I'm thinking not, but what will the G-Box think?
I just did a test to see if the G-Box had any power at it's input connector. There being
none, now makes me realize that the G-Box is waiting for voltage signals, and not providing them.
I even forced a short at the input, with no faults arising--WHEW!
It might sound as though I've answered my own questions, but should I be worried about
the two LNB lines being shorted for that brief moment? Mind you, the LNB power source is safe,
it's just that both of the LNB lines are being grounded briefly.
Thanks again for the awesome help.