New Receiver same problem!
Just to recap, I have a 39" ku dish with a linear 10.750 lnbf mounted on a 5' tripod. I use a Digital Satellite Signal Meter to get the satellite and then blindscan on the Coolsat 5000. In the coolsat 5k I select the sat I want, set the lnb freq to 10.750 and received a 100% red strength bar, and a 0% quality bar. after not getting anything from the blind scans, i input an active feq. on the satellite I was trying to receive, scanned the sky again, got a 99% reading on the small signal meter, but nothing from the coolsat. So, I found a really good deal on a SonicView 360 Premier and hoped that the coolsat was just broken and thats why I was getting no signal from it. Unfortunately the SonicView is doing the same thing! I have tried 4 or 5 different coax cables, blind scan with and without the signal meter hooked up between the lnbf and the receiver, and still I get only 100% strength and 0% quality on everything I try. Am I just flat out not doing something right? I used dishpointer.com to calculate my elevation and look angle. with those things and a clear view of the southern sky (which I have) I thought that I have everything I need to start getting FTA channels. The whole thing is very frustration as I have spent weeks trying to get anything from any satellite. at this point, I dont care about getting one specific satellite, I just want to see something to show me I haven't wasted my money on this equipment. Any ideas or suggestions would be appreciated.
-Thanks in advance,