Social Feed

TheMightyFederer

Last reply Oct 15, 2010 · posted in FTA Receiver / Equipment Support

having issues with new software

guys,
plz help me
i made a format application area then i install a firmware and now the azbox shows me a black screen

what should i do???
the azbox screen display shows me nothing after booting, checking, and loading

is there something wrong??? plz tell me

16 Replies · 2402 views

Load Replies (16) Reply Legacy View

TheMightyFederer

Sep 18, 2010

thx dude,
for this problem i made another format and wait for about 30 seconds (while the receiver was switched off) then switched it on and reinstall the firmware (i was using the SCART) and everything is back

but i have another problem which is the biggest and the most important one

i had a problem with my AZBox HD Premium which was that when i try to do anything in setup section the receiver asks me about the password which i don't have
some told me that the password is "0000" but it didn't work with me and some suggested to upgrade the firmware and i have upgraded the firmware to 0.9.4931 successfully

but when i went to the setup screen and tried to do anything
the receiver asked me about the password again and when i typed "0000" nothing changed at all

guys,
i'd ask u something else beside my problem
i wonna u tell me how to do anything in the setup section step-by-step and i wonna u c if my way is correct or not

i press the blue button (home) then i go to number 9 which is (sitting) and press (OK) button. -then "please wait..." appears to me for about five minutes then unfortunately an error message comes out to me says (Fail to receive data err=-1)-
after that i press (OK) button then press the (Right) button and press (OK) button *in this moment a message comes and asks me about the password* of course i type 0000 then "OK" button
then it brings me back to the left bar with no changes even if i press the left button the receiver asks me about the password again

(i wrote all of this just to make sure that i'm doing the right thing and to show u what i'm doing to find out a solution)

so, is there a solution for the password (to remove it, change it, or to know it)???
and what's that err=-1??? and what's the solution???
some suggested to format the application area then install a firmware again and some suggested to install the plugin "PRIORITY MANAGER V1.8" and do Reset Passwords
but these ways didn't work with me

so, plz tell me what should i do to remove this password
and i wonna format the whole receiver so that the password will be deleted then i install a new software and firmware
so, how can i do such things? and where can i find the software?

i'll be waiting for ur help
so, plz don't let me down

getittv

Sep 23, 2010

sounds like you need to find a different forum i ask questions on this forum havent got any answures back try this forum satfix lot better folks and well help you on this box i ask ice burg in a privte meassage they never replyed back

boomer_106

Sep 25, 2010

I couldn't find any information about this problem.

AcWxRadar

Sep 25, 2010

MightyFederer and Dino.tee,

I responded to your dilemna in another thread, but then I read this one too.

Here I see that at least you (MightyFed) have already tried to format the application area. Since the password problem still existed after doing so, I wish you to try the FACTORY RESET option in the menus. If that does not cure the error, then I would recommend that you re-download the firmware file that you were using or better yet, download a totally different FW file and use that instead and repeat the whole process (format app area and factory reset).

I am fairly well convinced that you have something corrupt in your firmware file that is causing this issue. It is definitely software or firmware related and cleaning the slate is going to be the best procedure, but the procedure to clean it completely is something that we will have to figure out on our own. No one has written out any official procedure and step-by-step process regarding this (yet).

We are all still young guinea pigs with this Linux based receiver and we need to learn a few new tricks. Some of us have Linux training and experience, others, like myself, are nearly lost in the woods so we have to feel our way around in the dark. That's ok though, I like the outdoors and the woods! LOL

Read my response to the other thread, first.

A NOTE TO ICEBERG: This thread and the other should be merged, I think. They are parallel posts in theme.

RADAR

plumberguy

Oct 14, 2010

TheMightyFederer said:
thx dude,
for this problem i made another format and wait for about 30 seconds (while the receiver was switched off) then switched it on and reinstall the firmware (i was using the SCART) and everything is back

but i have another problem which is the biggest and the most important one

i'll be waiting for ur help
so, plz don't let me down

I had same problem It is not a FW problem it is
Channel list just load any good list and back to normal no more password.

good luck

AcWxRadar

Oct 14, 2010

Pardon me for being late to follow up.

I don't know if you guys have resolved this issue or not. I don't have any answers for you either, but near as I can tell, it sounds like someone may have purposely or inadvertently changed your parental password from the default of "000" to "????".

I have been looking for posts and threads relevant to this issue, but haven't found anything specifically related yet. Found several things related to the WiFi or FTP/TelNet login and password, but not the internal PW.

I believe that there is a MASTER PASSWORD that you can use to override any other, but I haven't found that information yet. I have seen a thread where master PWs are listed for multiple other boxes, but the AZBox was not listed in those that I saw.

I hope that you two, dino.tee and MightyFederer are not dissapointed with your request results here from satelliteguys. I wish that I could have provided the solution, but I simply don't know and haven't yet found the answer. It appears that no one else here has run into this situation themselves, either.

PlumberGuy, I think this PW issue is a little different than what you expect. I think it has a simpler cause, but a more difficult repair.

If I find out anything, I will post right here for you.

RADAR

comfrey

Oct 15, 2010

hmmm. checked out satfix... IMHO it's Garbage.

getittv said:
sounds like you need to find a different forum i ask questions on this forum havent got any answures back try this forum satfix lot better folks and well help you on this box i ask ice burg in a privte meassage they never replyed back

View all replies (16)

TWiT Tech Podcast Network

3 minutes ago · posted in TWiT Tech Podcast Network

Tech News Weekly 441

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/watch?v=JL5XFOpX4_A

Direct YouTube Link - Tech News Weekly 441
TWIT's Website
TWIT Live Feed

0 Replies · 0 views

Replies Reply Legacy View

TWiT Tech Podcast Network

3 minutes ago · posted in TWiT Tech Podcast Network

Home Theater Audio: JBL SCL-6 Speaker Custom Build! #shorts

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/shorts/CRhynF2RE20

Direct YouTube Link - Home Theater Audio: JBL SCL-6 Speaker Custom Build! #shorts
TWIT's Website
TWIT Live Feed

0 Replies · 0 views

Replies Reply Legacy View

teachtom

5 minutes ago · posted in DISH Network Support Forum

Problem when I switch from Bonus View channels back to regular Dish channels

Hello everyone, new guy here. I'm trying to solve problem I'm having with Dish bonus view channels. When I'm watching the bonus view channels then I switch back to regular dish channels, after few minutes the screen flips to black and after 30 seconds flips back to regular channels and continues to flip back and forth until I turn off TV. After I wait 30 minutes and turn back on , I can use regular channels again. So, its after I switch from bonus view channels to regular dish channels the problem starts. Been trying to fix this for a month, but no luck
Here what I've done.
i contacted Dish support and they sent me a new Joey3, but no help. Switched to a different HDMI input on TV, no help. Used different HDMI cable , no help. Used different electrical wall plug, no help.
Finally got a Dish tech to check it. He ran all systems check and was OK. Finally he brought in a small TV and plugged in the HDMI out from the Joey to the small TV. He could not get the problem to occur on his small TV, so the new Joey was working OK. So, then the problem must be myTV. He made some phone calls and came back with the answer that there must be a problem with the analog to digital switch in my TV. Has anyone ever heard of a problem like this, or is it time to be looking for a new TV? My tv LG OLED65C8PUA. TV has been trouble free til now. Thanks

0 Replies · 0 views

Replies Reply Legacy View

dfergie

Staff member HERE TO HELP YOU!

Last reply 16 minutes ago · posted in What's Cooking?

What's For Lunch?

We have a Breakfast and Dinner thread so...

Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...

5389 Replies · 334591 views

Load Replies (5389) Reply Legacy View

TRG

Monday at 3:34 PM

Pork shoulder, refried beans, cheddar and chopped green chile burrito with a pint of pale ale.

Its nice being able to have a pint with lunch during the week or whenever. I've been enjoying the retired life.

Reactions: Bobby and dfergie

dfergie

Monday at 4:27 PM

TRG said:
Pork shoulder, refried beans, cheddar and chopped green chile burrito with a pint of pale ale.

Its nice being able to have a pint with lunch during the week or whenever. I've been enjoying the retired life.

View attachment 191651

Congrats! I love retirement, no wake ups, no e-mails...
Leftovers for lunch, bacon wrapped salmon fillet from Saturday and a KFC thigh from Friday, Tea.

Reactions: TRG

TRG

Monday at 4:50 PM

dfergie said:
Congrats! I love retirement, no wake ups, no e-mails...
Leftovers for lunch, bacon wrapped salmon fillet from Saturday and a KFC thigh from Friday, Tea.

I've been retired since October. It was very strange at first. But I'm loving it now.

Reactions: dfergie

TRG

Yesterday at 4:11 PM

Creamy flat chicken enchiladas with green chile, beans and rice.

Reactions: dfergie

dfergie

30 minutes ago

Layered Spicy Dorito / chili cheese Frito pie casserole…real sugar Pepsi

Reactions: TRG and Bobby

TRG

16 minutes ago

I had a very unusual but delicious 1/4lb hotdog with cream cheese, raspberry preserves and chopped Hatch green chile. It is an unlikely combination but it works.

View all replies (5389)

N5XZS

Last reply 27 minutes ago · posted in Over the Air Television By RabbitEars.Info

New low power station with CP has been granted. "Albuquerque "

New low power station has been granted by the FCC and the new call leter is K33OB-D on RF ch. 33.

Will run at 15 KW ERP, this one runs from the Westside same location as KWPL-LD a HC2 owned station.

It's going to be aimed at eastern part of Albuquerque, so it's tightly focused beam pattern.

This new station is owned by Digital Network and what kind of programmings is unkown at this time.

10 Replies · 149 views

Load Replies (10) Reply Legacy View

Reactions: comfortably_numb and dfergie

N5XZS

Yesterday at 4:51 PM

Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets on like the Rev'n, Karate Acton movies, different kind of music videos on the new station. :hatsoff2

Reactions: comfortably_numb

comfortably_numb

Yesterday at 4:54 PM

N5XZS said:
Yeah, there are some diginets like Heartland, Retro, The Family Channel diginetworks that we already have here in this market and we don't need duplicates, but bring the new diginets like Revn, Karate Acton movies, different kind of music videos on the new station.

I watch MovieSphere Gold channel a lot. Many recent movies on that digitnet

N5XZS

Yesterday at 4:59 PM

Yes that's a good channel MovieSphere, only thing is the missing CC on it.

Reactions: comfortably_numb

comfortably_numb

Today at 1:35 AM

According to the FCC listing, the tower is near I-40 and Juan Tabo:

FCCInfo Results

FCC Info is a Radio and Television Station Search Engine provided by Cavell, Mertz & Associates, Inc.

www.fccinfo.com

primestar31

27 minutes ago

comfortably_numb said:
According to the FCC listing, the tower is near I-40 and Juan Tabo:

FCCInfo Results

FCC Info is a Radio and Television Station Search Engine provided by Cavell, Mertz & Associates, Inc.

www.fccinfo.com

Many of these in my DMA are on cell towers, so don't always reach very far because the towers aren't very high.

View all replies (10)

Linus Tech Tips

33 minutes ago · posted in Linus Tech Tips

I Found Free Money in the Tech House

Time for another AWESOME video from Linus Tech Tips!

View: https://www.youtube.com/watch?v=6FoAOhbeo5Y

Direct YouTube Link - I Found Free Money in the Tech House
Linus on Facebook
The LTT Store

0 Replies · 3 views

Replies Reply Legacy View

TWiT Tech Podcast Network

Today at 1:32 PM · posted in TWiT Tech Podcast Network

Hollywood Faces the AI Tipping Point with Robert Tercek

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/watch?v=MOgBoy9ScCY

Direct YouTube Link - Hollywood Faces the AI Tipping Point with Robert Tercek
TWIT's Website
TWIT Live Feed

0 Replies · 2 views

Replies Reply Legacy View

zippyfrog

Pub Member / Supporter Lifetime Supporter

Last reply Today at 1:28 PM · posted in DISH Network Support Forum

Price Increase on Owned Equipment?

Did anyone have a price increase today on their equipment? I own my VIP211k's, and they have been $5.00. My bill that I received last week shows the "add-ons" as being $5.00. However, I just logged into my Dish account, and my "add-ons" are now $10.00. Did the additional receivers go up by $5.00 recently?

As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.

6 Replies · 85 views

Load Replies (6) Reply Legacy View

zippyfrog

Today at 11:29 AM

However, when I make a change (tried to add the Columbian pack for $2 so I could generate my bill) and there is a new line - it says "Access for TV" - whereas previously that line item was not there. I hope they aren't charging $5.00 for the initial TV now...

Reactions: charlesrshell

telstar_1

Today at 11:45 AM

Apparently it's not an "owned receiver" fee but rather an extension fee that's applied to 2nd and subsequent viewing. Maybe that played into their decision to force a box at every TV- garnering those fees

Reactions: zippyfrog and charlesrshell

zippyfrog

Today at 12:34 PM

telstar_1 said:
Apparently it's not an "owned receiver" fee but rather an extension fee that's applied to 2nd and subsequent viewing. Maybe that played into their decision to force a box at every TV- garnering those fees

Possibly. In theory, $9 of the base pack has a rental fee built in. But now is this $5 a chance to get a little more? I don't know for sure. According to chat, it is a glitch and will be resolved in a timely manner, but we shall see. Part of my thinks there is a going to be a new charge, whether it is now or this fall. Here in Illinois, the law requires we are given 30 days notice of any fee changes, but I have not been given anything.

Reactions: charlesrshell

MikeD-C05

Today at 1:11 PM

These fees are why streaming has caught on so well across the country and DISH is losing subs each quarter. Soon won't be enough subs to be profitable.

Reactions: Mr Tony, zippyfrog and charlesrshell

telstar_1

Today at 1:28 PM

Does cable charge box rent?

Reactions: charlesrshell

View all replies (6)

Bruce

Supporting Founder Lifetime Supporter

Last reply Today at 1:16 PM · posted in DISH Network Support Forum

Dish Satellite now under 5 Million subscribers/Sling under 2 Million.

With the 1st Quarter Report just released, Dish lost another 180,000, now at 4.84 Million.

Sling now at 1.79 million subscribers, down approximately 190,000.

For comparison, YouTube TV now has about double the subscribers of Dish and Sling combined.

DISH & Sling TV Lost Over 366,000 TV Subscribers In Just 3 Months | Cord Cutters News

EchoStar Corporation, the owner of the DISH Network satellite television service and the Sling TV streaming platform, continued to experience steep declines in its pay-television customer base during the first three months of 2026. The company reported a net loss of approximately 366,000 pay-TV...

cordcuttersnews.com

71 Replies · 3423 views

Load Replies (71) Reply Legacy View

fmj77

May 11, 2026

I'm surprised Dish still has that many subscribers. I don't know a single person in my area that is still with them after getting either Starlink or fiber at their home. They all cancelled Dish and went with streaming. I used to get offers pretty regularly in the mail to come back to Dish, but no more. Haven't seen one in a couple of years now.

Reactions: charlesrshell

Bruce

May 11, 2026

fmj77 said:
I'm surprised Dish still has that many subscribers. I don't know a single person in my area that is still with them after getting either Starlink or fiber at their home. They all cancelled Dish and went with streaming. I used to get offers pretty regularly in the mail to come back to Dish, but no more. Haven't seen one in a couple of years now.

Only about 3.6% of Households in the United States, still have Dish Network.

For comparison, YouTube TV has about 10%.

Reactions: fmj77, telstar_1 and charlesrshell

Yespage

May 18, 2026

$25 a month for 1 gig, for two years with Spectrum. I'd be darned that their router was MUCH better than AT&T's. I didn't realize that what I thought was something else was the bloody router. Those buffering issues stopped when I swapped... after AT&T refused to lower my bill, after 25 years of high speed internet service. They wanted $80 or so a month for 1 gig, with no drop to a lower speed.

Reactions: charlesrshell

telstar_1

Jun 2, 2026

I despise that most of all. I'm going to talk to a remote?

Reactions: MikeD-C05 and charlesrshell

tsunami2311

Friday at 11:03 PM

Yespage said:
$25 a month for 1 gig, for two years with Spectrum. I'd be darned that their router was MUCH better than AT&T's. I didn't realize that what I thought was something else was the bloody router. Those buffering issues stopped when I swapped... after AT&T refused to lower my bill, after 25 years of high speed internet service. They wanted $80 or so a month for 1 gig, with no drop to a lower speed.

1gbit up and down here from att start out great was suppose to be $60 for life of service, with years time it went back up to $80 I complained about they gave us $49 for year which about to end, I Wonder what prices will be when it "up" I in no way like ATT fiber service there DNS that are hardcode and unchange able in the router are some WORSE DNS I ever used. you know how much of pain it is to change DNS setting on EVERY single wireless device...

Reactions: charlesrshell

mwdxer1

Saturday at 3:08 AM

Bruce said:
Only about 3.6% of Households in the United States, still have Dish Network.

For comparison, YouTube TV has about 10%.

I dropped Dish a couple years back after having them for 25 years. The pricing got higher and after we got high speed internet, I watched it less and less. It got to the point all I watched was TCM for classic movies. Many of them are on You Tube now and a Premium subscription is $14 a month. A far cry of the $100 a month was paying with AT180, Supers, and locals. I get locals OTA anyway. I took down the dish several months ago and tossed it. I owned all my my equipment, so nothing to return. Do I miss a traditional cable type service? No way. If I want one I have all of the free live streaming with Roku, the Fire Stick, as well as Google TV. Right now as I type this, I am watching episodes of "The Midnight Special" from 1976 on You Tube, ad free. Dish was fine for many years. I do not regret buying the equipment and installing it myself (No installers in 1999). I enjoyed Dish for many years. My thoughts, Dish & Direct will be forced to merge in time, or they both will be gone. Even cable companies are getting out of TV. Some are only selling the internet and phone packages.

Reactions: charlesrshell and MikeD-C05

tanman

Sunday at 12:01 PM

telstar_1 said:
I despise that most of all. I'm going to talk to a remote?

Hello Computer On Phone GIF - Hello Computer Hello On Phone - Discover & Share GIFs

Click to view the GIF

tenor.com

Reactions: charlesrshell

nelson61

Monday at 8:20 PM

A lot of it flows back to the 4 big networks.
Cable and satellite are their money tree.

But, in reality, each market need 1 or perhaps 2 news feeds - not 4 or more

Reactions: charlesrshell

MikeD-C05

Today at 1:16 PM

nelson61 said:
A lot of it flows back to the 4 big networks.
Cable and satellite are their money tree.

But, in reality, each market need 1 or perhaps 2 news feeds - not 4 or more

In my area we get 2 news feeds spread over 4 local stations.
ABC/NBC (TEGNA)
Same news cast simulcast over both channels.

CBS/Fox (Sinclair)
Same news casters at 5pm, 6pm, 10pm.
Fox shows an hour at 9pm but same news casters.

Reactions: charlesrshell

View all replies (71)

lordodogg

Last reply Today at 12:54 PM · posted in DIRECTV General Forum

HR44 rebooted overnight?

Hello again, haven't posted here in a while.

This morning, around 6:30am, I woke up and found the front panel lights on my HR44 on (I leave it off all the time as it is co-located with one of my Geminis).

Immediately thinking that either a reboot or power outage occurred, I checked the software version, and found that it's still the same release that was sent out last month.

I then ruled out a power outage by checking the clocks on my appliances and seeing that they're still correct (they reset when there's an outage, somewhat similar to the "blinking 12" on VCRs).

I then confirmed a reboot by checking the Upcoming Recordings (fka To-Do List) and seeing that the number was much lower than before (it always resets after a reboot).

I am definitely guessing what happened (and it may very well be actually what happened) is that the "Reset Required" prompt may have come up sometime overnight, and it eventually timed out and rebooted automatically. IIRC that prompt comes up when new software "plugins" have to be installed.

Would like to hear your thoughts, especially since I probably haven't talked to some of you reading this in a while (was a former CE member, left almost a year ago).

Thank you all in advance!

4 Replies · 150 views

Load Replies (4) Reply Legacy View

Tom Speer

May 20, 2026

My HR54 blue light is on this morning. I think you ae right about the plugins. They are tweaking things in the customer National release. What version does your HR44 Genie have now? I think you are probably on the same varsion as the CE group today.

lordodogg

May 20, 2026

I believe mine says 0x1D7F

Tom Speer

May 20, 2026

That is what I have.

Reactions: lordodogg

lordodogg

Today at 12:54 PM

Happened again today & have new software, 0x1d88

Top

Back