Radar, when I go to Menu (by remote) and scroll down to Reserved program, I would see a blank square box next to the scheduled recording setup. I can put a check in that box by using the the Check button on my remote. It doesn't seem to do anything, whether I check that box or not.
Right now, I am still having problems with using the Maz 3 to program the recording setup.
After setting up the parameters of my scheduled recording and uploading it to the Ultra, I would be on another satellite. I would turn off the AZBox (sleep mode) and wait to see what it will do. When the time for it to record, I would see a green LED light come on and I waited for 10 minutes. I was assuming that the Ultra was going to the satellite and TP to be recorded. After the green light go off, I would turn on my receiver to see if it recorded. It didn't. I went to Menu/Recorded program to see if it recorded. Nothing. But when I use the Menu/Reserve Record/Play to program the recording setup then I would see the program I recorded, after it did the steps I programmed in my Ultra.
It is not that way using the Maz 3. I will try again later this evening and see where I am messing up using the Maz 3. After I do the steps you outlined in your tutors and making sure it was highlined before uploading to the Ultra, I would check the Menu/Reserved program to see if is there, it would be listed, just as I programmed it in the Maz 3. So I know I am doing that right. As I just mentioned, it would come on at the appointed time and record. But it doesn't. Was there a thread mentioned about the AZBox not recording a program to the HDD? (by using the Maz 3?)
Radar, I hope you don't mind sharing with you all the up and downs I am experiencing with this particular subject. I don't want to hijack your thread on this, but I was hoping you wouldn't mind. I thought what I am experiencing would help you pinpoint what is going on and maybe sharing with us users your findings and put that info into your tutorials. AZBox failed to provide us Ultra users a detailed owner's manual but you really step up on the plate and helped us get that info we really needed. I know the AZBoxes all share the same firmware but each model of the AZBoxes has its own bell and whistles so the firmwares won't work on all models. Bummer. But it is the same way with computers. Windows 7 would work on all the latest computes but each model of computer has its own bells and whistles.
That is why it is hard to find a WIFI adapter to work with the Ulta. The Premium Plus is already WIFI equiped and I recon that the Premium can use the WIFI adapter capable for that model. So the point I am making is that not everything in the 5020 firmware will work with the Ultra. It will in the other AZBoxes. depending on their capabilities.