Social Feed

bobvick
Pub Member / Supporter Lifetime Supporter
Last reply · posted in Free To Air (FTA) Discussion
I am trying to get the elevation of my dish set correctly. I have a Hot Dish 90 that I am trying to mount on a SG2100 motor. I have the motor latitude set at 34, which is my latitude. When I go to dishpointer.com and look in the instruction book it tells me that for a SG2100 motorized system that I need to have the dish elevation set at 24.5 degrees. The problem is, the elevation scale on the Hot Dish 90 only goes down to about 25, from the best I can tell, and I can't get that low because of the bolt. What I am doing wrong? Does anyone have any ideas? I have posted some pictures below.

dish1.jpg

dish2.jpg

dish3.jpg
41 Replies · 5904 views
bobvick
I tried again yesterday to get some satellite, some where. I was unable to find anything again. I was not able to work long and I did not have my TV set and receiver out with me. I had an idea, and I wonder if it will work. I thought about taking the dish off of the motor, and removing the motor from the mounting pole. Then position the dish (with no motor, just az/el mount it) for 87W. Once I have found 87 that way, (if I can find it), I wonder if I could measure the angle of the dish with a straight edge vertically up and down the face of the dish, and copy that number down, and then put the motor back up and position the elevation of the dish using that number I copied down when I had it as an az/el mount. I wonder if that would work?
Nosbod
I rechecked your pictures and I see your latitude based on your motor setting is approx 34 degrees. If this is accurate then based on my paper work your dish elevation should be some where around 50.47 degrees. Make sure you motor is in the center position and make sure the dish is aligned straight on the motor mount pole and the LNBF is 90 degrees to the dish.
bobvick
I would have gotten the GeoSat Pro dish if I had not gotten a deal on this from the guy I bought my first motor from. I had bought a Premium motor, and it did not work out like it was supposed to. Anyway, to make a long story short, he took the Premium motor back and then gave me a good deal that I could not pass up on the SG2100 and the HotDish 90. I have a Geo Sat Pro 1.2m from Brian, and it is MUCH nicer than this HotDish 90. Like I said, I would have rather had the GeoSat Pro 90cm, but I got to good of a deal on this in my particular situation.
But to reiterate, if you are in the market for a GOOD dish, get the GeoSat Pro. And I can not recommend SatelliteAV enough, great folks to deal with.
bobvick
I rechecked your pictures and I see your latitude based on your motor setting is approx 34 degrees. If this is accurate then based on my paper work your dish elevation should be some where around 50.47 degrees. Make sure you motor is in the center position and make sure the dish is aligned straight on the motor mount pole and the LNBF is 90 degrees to the dish.

If I am thinking correctly though, since this is on a motor, would I not need to take the offset angle of the dish away from the angle? The offset angle of the dish is 24.62, and the elevation is 50.47, so would I not need to set the dish elevation at about 25.85-26 as measured on an inclinometer on the face of the dish using a straight edge?
AcWxRadar
I tried again yesterday to get some satellite, some where. I was unable to find anything again. I was not able to work long and I did not have my TV set and receiver out with me. I had an idea, and I wonder if it will work. I thought about taking the dish off of the motor, and removing the motor from the mounting pole. Then position the dish (with no motor, just az/el mount it) for 87W. Once I have found 87 that way, (if I can find it), I wonder if I could measure the angle of the dish with a straight edge vertically up and down the face of the dish, and copy that number down, and then put the motor back up and position the elevation of the dish using that number I copied down when I had it as an az/el mount. I wonder if that would work?

Bob,

I like this idea of yours. Set the HOT DISH 90 up as a FIXED POINT dish on the mast alone (without the motor). Dial in satellite 87°W and then place a straight edge down the face of the dish vertically. Use your inclinometer and read off the angle from the straight edge. This must be the same angle that the face of the dish will have when it is attached to the motor. So, when you attach the dish to the motor, you won't need to question what angle you should add or subract from what. It elliminates the need to know what the angle of the motor tube bend is (whether it be 30°, 35° or 40°).

When you attach the motor, with the motor elevation set to your latitude of 34°, just use the same straight edge and set your dish elevation adjustment to obtain the same angle as you recorded when the dish was set as a fixed point dish.

If you cannot adjust the dish elevation bracket to obtain the same reading because of mechanical limitations, then the dish is either assembled incorrectly OR, if it is assembled correctly, it just may not work with a motor in that configuration. In that case, you will need to "flip" the mounting hardware / bracket on the back of the dish so that it is up-side-down. That should expand your adjustment range so that it will work. Obviously, you will not be able to utilize the original elevation scale of the dish in any way that makes sense as it will be reversed now and when you are increasing the elevation, the numbers will actually be going down and only match up at one point where it crosses over. You won't need to be concerned with that, though. Just use your inclinometer and set the dish elevation that way and simply ignore the scale on the dish bracket.

If you are inclined to do so, while you have the dish set up as a fixed point dish, you could set the dish elevation at increments of 5° or less and mark off a new scale on the dish bracket. Then, you can read from this new scale and avoid the process of having to remeasure the angle with the inclinometer every time you want to tweak it. Once it is marked out accurately, you can always refer to it later with ease. Especially so if you have to invert the mounting bracket.

RADAR
Nosbod
No. You have an offset dish so you don't have to worry about declination that's why the dish is offset. The only adjustment you have to make is the elevation. You set the inclination on the motor to your latitude from your pictures that's 34 degrees. Set your dish elevation to 50.47. Point the dish true south and follow my previous instructions.

You don't have to be a mathematician here your over thinking the problem. Keep it simple.
jbebic
Hello bobvick, I have the same dish and the same question as you did. What was ultimately the resolution of your problem? Is it what nosbod suggested?
Gary Toma
Staff member Pub Member / Supporter Cutting Edge
Last reply · posted in DIRECTV Technical Resources Forum
The TPN Map Excel Presents all DIRECTV Channels:
National (50-States or wide/NAT+PR beams)
Local (Local-Into-Local or narrow/Spot beams)
Additional tabs provide:​
OTA the (Over-The-Air) Database
VOD (Video On_Demand) Records
Offline Records
Engr Records
Net Decoder a graphic presentation of all satellites and transponders
Domestic Satellites
@99W...... D11, D14
@101W.... D9S, D16
@103W.... D10, D12, D15
@110W.... D5
@119W.... D8​



See also

Understanding the TPN Map

Making Sense of the TPN Map Display Conventions
1969 Replies · 910587 views
D
Weekly Analysis for 6/10/2026:
  • Like
Reactions: lordodogg
K
604 Pursuit HD is testing

Women's US Open Out, Men's US Open and World Cup in

The World Cup Bracket on 205-6 and 407-2 will be repurposing CINEHD 154
(There will be a mix on one of the 205s and 407-1)

The Vegas specific slate for KTNV is repurposing Dispute Slide 1 Test 9109
lordodogg
604 Pursuit HD is testing
Interesting. I remember that being HD-only for a bit a long time ago and then it was back to SD-only.
  • Like
Reactions: Gary Toma
lordodogg
Interesting. I remember that being HD-only for a bit a long time ago and then it was back to SD-only.
looking at the old maps, that was from March 2017 to June 2019.
lordodogg
Starz is apparently dropping all of the west coast feeds of their networks tomorrow. FiOS has already dropped most of the ones they carried and I imagine DirecTV would be affected with STZw on 526 and SENw on 536.
zippyfrog
Pub Member / Supporter Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Did anyone have a price increase today on their equipment? I own my VIP211k's, and they have been $5.00. My bill that I received last week shows the "add-ons" as being $5.00. However, I just logged into my Dish account, and my "add-ons" are now $10.00. Did the additional receivers go up by $5.00 recently?

As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.
7 Replies · 112 views
T
Apparently it's not an "owned receiver" fee but rather an extension fee that's applied to 2nd and subsequent viewing. Maybe that played into their decision to force a box at every TV- garnering those fees
zippyfrog
Apparently it's not an "owned receiver" fee but rather an extension fee that's applied to 2nd and subsequent viewing. Maybe that played into their decision to force a box at every TV- garnering those fees
Possibly. In theory, $9 of the base pack has a rental fee built in. But now is this $5 a chance to get a little more? I don't know for sure. According to chat, it is a glitch and will be resolved in a timely manner, but we shall see. Part of my thinks there is a going to be a new charge, whether it is now or this fall. Here in Illinois, the law requires we are given 30 days notice of any fee changes, but I have not been given anything.

1781195549844.webp
MikeD-C05
These fees are why streaming has caught on so well across the country and DISH is losing subs each quarter. Soon won't be enough subs to be profitable.
T
Does cable charge box rent?
R
Does cable charge box rent?
The cable company I was with years ago did charge $9.99 for a receiver.
Y
Pub Member / Supporter
· posted in The Sports Section
Mexico takes on South Africa to open the World Cup Final (it is called the Final... this just isn't the World Cup Final... Final). The tournament has been plagued with rife malfeasance as FIFA has been committing all sorts of fraud with the ticket sales. Hotel rooms have gone unfilled as the prices to attend a game and stay somewhere are through the roof. I swear this is impacting Mansfield, OH hotel rates which are higher than average for the Indycar race. And there is a broadening VAR presence which will ruin things as nothing worse now when scoring a goal and knowing you can't quite celebrate yet as they check to see if a player was offside by a pixel a half-hour ago.

The Group Stage used to mean something, but now 32 of the 48... yeah, 48 teams are going to the Knockout Round. Getting into the Knockout Round used to be a big deal, even for the US. But now... if you don't lose all of your group stage games, you get to move on. Oi! And this is avoiding all the political stuff!

I have never been so unexcited for a World Cup before. Every game used to matter. But FIFA be darned if they don't try to squeeze out every dime they can out of the players, refs, and fans.
0 Replies · 3 views
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in The Sports Section
Anybody been following the Tournaments? I've been watching all weekend on the various ESPN's...
1128 Replies · 100777 views
  • Like
Reactions: charlesrshell
dfergie
Not a good inning… Kavan coming on could be the nail.
dfergie
Better team won tonight…
  • Like
Reactions: charlesrshell
osu1991
Well crap. That wasn't fun. Oh well on to the CFL opener on cbs sportsnet.
RaiderPower
"In the end, there can be only one" - Duncan MacCleod of the clan MacCleod
dfergie
Last weekend I got in on a MLB game top of the 8th 1-1, first thought was extra innings... :D and it actually went extra after the 9th.
Catching a little of the AUSL, something to watch when I can't get into anything else.
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in The Sports Section
112 Replies · 2736 views
  • Like
Reactions: Foxbat and meStevo
Y
Caught up to the 500... err... k in St. Louis. What a race! Andretti Motorsport were doing very well with Ericsson and Kirkwood, meanwhile Power was moving up the grid. Veekay started cautiously. He was working the tires just right, becoming more lethal later in the stint. Rasmussen was racing likewise, not nearly as insane as he has in the past. Palou was leading the race, in a shocker to all. Caio Collet was having a wonderful ride, making Ferucci potentially sweat a bit. Rain came, rain went, rain came, rain went. Generally mild sprinkles, but enough to pause racing on an oval.

Palou would kind of send Siegel into the wall. Siegel really didn't do much wrong. As he noted, you have to turn at some point. Palou had acres of room below and Siegel might have had his ticket out of Indycar stamped. Dixon was doing the fuel thing and got busted twice by yellows, not pitting before the flag came out. Then the most critical happened... Palou ran out of gas on pit lane, effectively giving Newgarden the race lead and win. Newgarden had a very early pit, so he was able to slide in, get service and go. Meanwhile, everyone else was confused and stuck behind Palou for a bit. Once people figured what was happening, Newgarden had a major advantage of several seconds. Newgarden wouldn't look back and when it went green again, he'd hold the lead for the win.

Massive credit to Juncos Hollinger who bested Penske in getting Veekay out before Malukas in a transition that was oddly bizarre. I haven't had time to check, but I'm wondering if Veekay was about to run out of fuel or cut a tire. He was charging late in a stint, got up to fifth, and then tailed back for a few laps to 10th or 11th. It looked like it was over. Went into the pits, and after the pitting sequence was over, Veekay was well inside the top ten again. It was weird. And he charged, getting up to fourth. He made a late move on Rasmussen, but Rasmussen held his position with some great driving. In fact, there was a ton of incredible racing passing, not passing all race long. Veekay would finish 4th. A podium would have been awesome, but it is a great outcome for a guy who hopefully will get a break with a big team. We saw what Veekay could do with a Honda last season with fuel save, imagine replacing Simpson on Ganassi and having speed to go with fuel saving. His 6th at Indy and 4th at St. Louis get him up to 13th in the points standings and only 5 points outside of the top 10.

Ericsson finished second, resigned to finishing behind the current best in the world guy on a short oval. Rasmussen got the final step on the podium, a nice rebound to what has been an otherwise bad year for him, and a good reward to ECR who just extended his contract.
Y
They raced USAC cars at Daytona once. Once! People died. Aj Foyt said 'f this', and left after the first go around. AJ freaking Foyt thought it was crazy! And cars weren't nearly as fast as they are now.

I think they tried Talladega once too.
Y
LeMans qualifying on going. WEC has d9ne a great job expanding the automotive company entries. Even without Porsche, a large nunber of manufacturers.
jcrandall
Staff member HERE TO HELP YOU!
Last reply · posted in DIRECTV Programming Forum
So...DirecTV advertises the Choice package with 95+ bonus channels for Satellite customers. You don't want 90+ of the 95...

Excluding PPV, premium networks, infomercial, shopping, religion, and non-English programming, there are 7 channels on satellite that are not on streaming:
NFL Network, MavTV, FE TV, Free Speech, NASA, INSP, and Pursuit. I'm pretty sure a couple of those are public interest that they have to carry to meet an FCC quota on satellite.

I hope they get called out for this advertising because that is ridiculous. One big network, NFL, will probably get added to streaming when their next agreement comes up, and the rest are likely very low viewership.

What about streaming, what do you get extra with the Choice package that isn't on Satellite:
Two stations - one of which is an internet TV - Fox Weather, and Heros & Icons (a diginet). Nothing special here to look at either.

If they cleaned up a couple of their agreements, added a few public interest stations to streaming, they could probably have their lineups match. It's close now, if you take out all the garbage on satellite that they earn money on. If they can sell infomercials on satellite, why can't they on streaming, seems like a miss. A bigger miss, including those stations in the "bonus channels just for satellite customers." Pretty sad marketing right there.

1681344805401.png


Attached is a comparison sheet of satellite vs streaming for the three main packages if anyone is interested.

MOD EDIT: See Post #3 for an up to date list of what channels are available on sat but not on streaming/internet, see Post #21 for an up to date list of what's available in the app for streaming customers, but not for sat customers.
220 Replies · 30382 views
K
107 LIVE4K3 and 108 LIVE4K4 are now testing on the stream server
M
107 LIVE4K3 and 108 LIVE4K4 are now testing on the stream server
Happy to see that DTV Stream will finally line up fully with the DTV Satellite 4K content and Channel Guide.
M
107 LIVE4K3 and 108 LIVE4K4 are now testing on the stream server
They turned them on today !
M
They turned them on today !
I see in the 4K Channels Guide that the Telemundo WC games will be airing in 4K. I believe this is the first time ever we will have Spanish-language broadcasts in 4K (in the USA). Did not happen during the last World Cup in Qatar 2022.
  • Like
Reactions: dtv757 and KyL416
dtv757
4K telemundo working !

406 still SD here in Norfolk Va 📡
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
67107 Replies · 2662303 views
  • Like
Reactions: c-spand
harshness
Time After Time - Cyndi Lauper
  • Like
Reactions: long_time_DNC
sdfntx
Right on Time - Brandi Carlile
gms49ers
Time Stand Still - Rush
  • Like
Reactions: long_time_DNC
Bobby
I Can't Help It (If I'm Still In Love With You) - B.J. Thomas
long_time_DNC
Help Is On Its Way - Little River Band
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 3 views