Social Feed

Ilya
Staff member HERE TO HELP YOU! Lifetime Supporter
· posted in General Home Theater Equipment
SONY ANNOUNCES 2013 BRAVIA TVS

by Communications 01/07/2013

KDL-50R520-1024x768.jpg


New 55 & 65-inch 4K Ultra HD LED TVs Debut Along Side an All LED Lineup Continuing Sony's Mission to Provide the Best Picture Quality No Matter the Source

LAS VEGAS, Jan. 7, 2013 (CES Booth #14200) – Sony is unveiling an impressive line-up of new BRAVIA TVs, with new 4K Ultra HD models at sizes and prices that put 4K within reach of a wider audience, and new LED sets that complement superb picture quality with features like WiFi™ and NFC. With these new TVs, Sony's goal is clear: deliver the most immersive home entertainment experience, with the highest picture quality, regardless of the content or source.

Following the successful launch of its 84-inch 4K LED TV in September 2012, Sony is expanding its 4K UHD XBR LED TV line by adding 65-inch and 55-inch screen sizes to the X900A series of 4K Ultra HD TV, with four times the resolution of Full HD (3,840 x 2,160 pixels). Also on display at CES are the W and R series of HD LED TVs which deliver an incredible home viewing experience.

"The 2013 BRAVIA line continues our acclaimed commitment to delivering the best picture quality at every model segment and with two new sizes, the amazing 4K TV experience will now be within reach of many more consumers," said Mike Lucas, senior vice president of Sony Electronics' Home Division. "The 84-inch XBR 4K LED TV is an impressive sight and a status symbol for sure, but these new sizes mean that the beauty of Sony 4K can be experienced in any home environment."

The XBR-X900A series of 4K LED TVs employ many technological advances to achieve their stunning picture. For example, the 4K X-Reality PRO™ picture engine reduces visual noise and corrects image shapes. TRILUMINOS Display LED backlighting is used in the XBR 4K LED TVs to present rich, authentic color with subtle tones while also replicating bold colors including hard-to-reproduce reds and greens. By integrating QD Vision's Color IQTM* optical component with Sony's unique display technologies, these televisions achieve significantly wider color gamut and provide a far more natural and vivid viewing experience with a heightened sense of depth. This wider color gamut also enriches and improves picture quality of personal content captured on compatible Sony digital cameras and camcorders compatible with TRILUMINOS Color, which contains wide-color gamut information in its content. Furthermore, Sony offers Blu-ray Disc players compatible with TRILUMINOS Color, allowing consumers to fully enjoy Blu-ray content shot in wide and rich color.

Along with offering its best-ever picture quality, the XBR-X900A series, 4K UHD LED TVs offer a better sound experience by incorporating an end-to-end Sony audio solution. Utilizing a Signal-to-Sound Architecture, these TVs incorporate Sony's own magnetic fluid speakers and unique digital signal processing technology to deliver smooth midrange, lower vibration and deep bass. The front facing speakers on XBR 4K LED TVs extend Sony's new design concept to match the exterior aesthetic of some of the other 2013 models for the home with a striking, angular, faceted outer cabinet – incorporating the Sense of Quartz design concept.

All XBR-X900A models are Wi-Fi® enabled and offer a wide range of internet connected services including Sony's smart connect solutions, enabling cross-device connectivity between mobile devices and their TV. With features such as One-touch mirroring and TV SideView®, the X series TVs provide greater control and additional content options by interconnecting media sources across the home and mobile entertainment ecosystem.

The X series of 4K LED TVs will be available in Spring 2013 at Sony Stores and select electronics retailers nationwide. Also available in Spring will be a lineup of Mastered in 4K Blu-ray discs from Sony Pictures' Colorworks Studio. The first titles to be available include The Amazing Spider-Man™, The Karate Kid and Taxi Driver. Sourced from pristine 4K masters and presented at high-bitrate, full HD resolution, these discs showcase more of the wide range of rich color contained in the original source content. When upscaled via the Sony 4K Ultra HD LED TVs, these discs serve as an ideal way for consumers to experience near-4K picture quality.

Sony's commitment to bring 4K content to the home does not stop there, as launching this Summer will be the first 4K Ultra HD Video distribution service in the U.S. Consumers will be able to enjoy native 4K content such as feature length movies from Sony Pictures as well as other productions with stunning picture and sound. At that time Sony will also introduce a dedicated 4K Media Player to bring this service to the home.

Great Picture Quality Does Not Stop With 4K Ultra HD

In addition to the new XBR-X900A, 4K LED TV models, Sony is debuting two new series of LED TVs, which will also arrive in stores this Spring, and created for consumers looking for an amazing high definition experience. The W series of LED BRAVIA televisions includes the KDL-W650A, KDL-W802A and KDL-W900A. All models are Wi-Fi enabled, with the W900A TV incorporating NFC features of the X-series, TRILUMINOS display, X-Reality PRO™ picture engine and active 3D capability. The KDL-W900A LED HD TV leverages the highest level of Motionflow™ XR for the best experience when viewing fast-moving action. The W900A integrates a unique long duct speaker cabinet design. The long 1.2m speaker duct is cleverly folded into a compact unit that's hidden neatly behind the TV screen. Though the speakers are hidden, the newly-designed speaker cabinet reproduces rich bass and lower midrange sounds, adding extra punch and depth to action movies, music and dialogue. This is means they produce the bass extension of a much bigger, bulkier speaker.

The R series BRAVIA LED HD TVs includes several options for consumers looking for feature rich TVs with incredible picture quality. The KDL-R550A LED HD TV with 3D is Wi-Fi connected enabling consumers to wirelessly access a full array of Sony Entertainment Network services; as well as being RVU compliant, meaning DirectTV™ customers with Genie™ Whole-Home HD DVR can access their set-top box, DVR and on-demand services right from the KDL-R550A TV without the need for additional equipment. With passive 3D (including four pairs of glasses) the model is available in 70-inch, 60-inch and 50-inch sizes representing new sizes and performance from Sony. Also available with the same feature-set, in 60 and 70-inch sizes, minus 3D capability is the KDL-R520A. Additionally, the KDL-40R450A LED HDTV and KDL-32R400A will debut offering excellent picture and a bevy of features, including One-touch Mirroring, representing a great value for consumers.
0 Replies · 1539 views
J
Last reply · posted in DISH Network Support Forum
This started a couple months ago. I have 2 H3s on one network, both with 2 EHD identical 3 TB seperately powered so all recordings are accessible by all 4k & J4s (8 of them).

On one H3 (not the main one that controls the MOCA network), after it reboots, it doesn't recognize it has two EHDs plugged into it. Rebooting the EHD by their power source doesn't fix it. Resetting the network doesn't. Software h3 reset doesn't fix it. Rebooting MOCA h3 doesn't fix it but so far, after 3+ cold boots (unplug pwr to H3 with unrecognized EHDs), it finally it figures out they are plugged into it. BUT.... Then when you open a program it only partially shows series and episodes, but instead of showing recordings, it only shows upcoming airings. HELP!!!!
20 Replies · 244 views
Almighty1
That would pinpoint it to the H3 that is the problem. Are both H3's on the same software version now and before? Did the system check actually do the full EHD test like the one below?

1792005788136.webp
  • Like
Reactions: charlesrshell
J
That would pinpoint it to the H3 that is the problem. Are both H3's on the same software version now and before? Did the system check actually do the full EHD test like the one below?

View attachment 194781
That didn't appear on the system check I ran on it. How do you trigger that test?
  • Like
Reactions: charlesrshell
J
That didn't appear on the system check I ran on it. How do you trigger that test?
They are both currently listed at V. H711 bootstrap V 1117 but the dates (are those install dates or V dates?) Are 9/5/2026 on naughty H3 and 8/15/2026 on nice one.
  • Like
Reactions: charlesrshell
Almighty1
They are both currently listed at V. H711 bootstrap V 1117 but the dates (are those install dates or V dates?) Are 9/5/2026 on naughty H3 and 8/15/2026 on nice one.
I just check my bootstrap in H713 and it says 1017, are you sure you have 1117? The dates are install dates.
  • Like
Reactions: charlesrshell
J
I just check my bootstrap in H713 and it says 1017, are you sure you have 1117? The dates are install dates.
20261014_154605.webp
20261014_154605.webp
Almighty1
Thanks JohnGalt1234 - That's interesting. I wonder are the Boot Strap versions different between a Hopper 3 only and a Hopper 3 with Hopper Plus setup as I have the later. I guess when charlesrshell is able to since he has both setups, he can do the test. Unless the bootstrap version is tied to when the specific Hopper 3 is manufactured, in my case, mines is from February 2016 when it was installed.

At least Google Search AI is saying the bootstrap version will never change and unique to each Hopper 3.

1792277626286.webp


This is probably why different people seem to either have the issue or they don't because the bootstrap code could also be tied to the hardware revision and
components other than the internal HD.
J
Sorry about dupe images... having a heck of a time trying to post an image of other H3 that my gf text to me.
J
Sorry about dupe images... having a heck of a time trying to post an image of other H3 that my gf text to me.
1000013035.webp
J
Thanks JohnGalt1234 - That's interesting. I wonder are the Boot Strap versions different between a Hopper 3 only and a Hopper 3 with Hopper Plus setup as I have the later. I guess when charlesrshell is able to since he has both setups, he can do the test. Unless the bootstrap version is tied to when the specific Hopper 3 is manufactured, in my case, mines is from February 2016 when it was installed.

At least Google Search AI is saying the bootstrap version will never change and unique to each Hopper 3.

View attachment 194853

This is probably why different people seem to either have the issue or they don't because the bootstrap code could also be tied to the hardware revision and
components other than the internal HD.
The image I just sent for master H3 is on hopper+., casino is not but both Vs and bootstraps are the same.
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 5 views
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
Anyone making their own breakfast sausage? I've recently been trying different recipes, found some I like, some I've modified...
41 Replies · 3596 views
  • Like
Reactions: spongella
navychop
Bob Evans Sage.
R
Bob Evans Sage.
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
  • Like
Reactions: navychop
S
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
owens on amazon is 54.99 for a 4 pk 16 oz a sausage. i feel that's kind of steep!!!
R
owens on amazon is 54.99 for a 4 pk 16 oz a sausage. i feel that's kind of steep!!!
Especially when I can get a two pound roll of Jimmy Dean from Sam's Club for $7.38.
dfergie
They run Owens at $3.99 for lb and $7.99 a couple times a month at some grocery stores here, I actually was wrong, just checked a pork sirloin roast it was $1.99 a lb. (cooked it yesterday so pack was in trash)
  • Like
Reactions: reubenray
TRG
TRG
I will look, but I don't think I have seen it. Owen's breakfast sausage use to be favorite, but I can't find it anymore. Jimmy Dean's country mild is OK also when I can find it.
Kroger stores carry Bob Evans Sage Sausage. For me that means Smiths.

1631.webp
R
Kroger stores carry Bob Evans Sage Sausage. For me that means Smiths.

View attachment 194848
No Kroger's near me. I live in the heart of Walmart land. The only option besides Walmart is Harp's.
TRG
TRG
I live in the heart of Walmart land.
My deepest condolences.
Peter Parker
Supporting Founder Lifetime Supporter
Last reply · posted in DISH Network Support Forum
No idea what improvements might be involved.
12 Replies · 561 views
  • Like
Reactions: LQQK and reubenray
cpdretired
Two bugs out and three new bugs in.🐞
Almighty1
Updated to H713 on a Hopper 3 from H712 with Hopper Plus a few hours earlier.

It brought a old problem back:

One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software.

This was a major problem with H703.

H710 removed that dependency but it's broken again.

Rick Durham and brittanygarden
  • Like
Reactions: charlesrshell
dishstaller
Two bugs out and three new bugs in.🐞
Yep. Just got a call from a customer who said her DVR buttons stopped working. Told her about the new software and had her reboot her H3, problem solved.
  • Like
Reactions: charlesrshell
bookworm370
Yep. Just got a call from a customer who said her DVR buttons stopped working. Told her about the new software and had her reboot her H3, problem solved.
Reboot just fixes it for a short time and then it's back to messed up

Try going exclusively to an IR remote and you will see the pain
Almighty1
Updated to H713 on a Hopper 3 from H712 with Hopper Plus a few hours earlier.

It brought a old problem back:

One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software.

This was a major problem with H703.

H710 removed that dependency but it's broken again.

Rick Durham and brittanygarden

Within the last few hours as I did check earlier today when it was still missing, the Available Joey Software line now has added "P154 P15403" which is for the Hopper Plus that I have but my Hopper Plus software is still on P15317, I will do a Download Android TV (ATV) Software for the Hopper Plus, Joey 4 and Wireless Joey which are all Android TV devices and then manually do a check update on the Hopper Plus to update the software shortly.
  • Like
Reactions: charlesrshell
BatStang2000
This happened to me. I was outside mowing and my wife came out and said that our nieces and nephews were going to be on the Noon News. She had it on in the bedroom on our Joey3. Since they weren't on yet, I decided to turn it on in the Living Room on our Hopper3. When I selected the channel (through Dish, not OTA) the Joey3 turned itself off. When I went back to the bedroom to turn it back on, the Hopper3 did a reboot. Luckily it all finished before their story came on, but I just found it strange.
bookworm370
Has anyone noticed an FF stutter with 713? I used to be able to hit FF a few times and skip smoothly. After 713 (maybe 712), when I skip forward, there is a definite stutter for as many times as I have pressed FF.

Can anyone check on this and report back? Recorded programs and then press skip forward a few times to see if it's smooth? Normally, it just jumps to the right place after the skips.
  • Like
Reactions: charlesrshell
R
I got the 713 update yesterday.
cpdretired
Supporting Founder
Last reply · posted in DISH Network Support Forum
Several Dish offers showed up today in my account. Once you choose one the rest are removed. Offers were Showtime, Starz, AMC and others.
38 Replies · 1799 views
  • Like
Reactions: ewindowman and LQQK
B
Just checked my account and it shows mgm+ at 8.00 per month, but that has red line drawn thru it and shows 0.00 per month. But it doesn't say how long this lasts,...... 1 month, 3 months, forever. I called customer service to get an answer, and they said nothing like that exists. Should I add the offer or not? Already paying them too much, but want to take advantage of something free.
S
Just checked my account and it shows mgm+ at 8.00 per month, but that has red line drawn thru it and shows 0.00 per month. But it doesn't say how long this lasts,...... 1 month, 3 months, forever. I called customer service to get an answer, and they said nothing like that exists. Should I add the offer or not? Already paying them too much, but want to take advantage of something free.
look again mine says free for 1 month
  • Like
Reactions: charlesrshell
Almighty1
look again mine says free for 1 month
Not for me, mines has no mention of how long aka the offer period and the Terms and conditions the $0.00 is good for. All I see is one can lose $5.00 if you decide to remove it before day 31 after you add it to the account.

1792131071109.webp
S
Not for me, mines has no mention of how long aka the offer period and the Terms and conditions the $0.00 is good for. All I see is one can lose $5.00 if you decide to remove it before day 31 after you add it to the account.

View attachment 194817
wonder why it says that
  • Like
Reactions: charlesrshell
Almighty1
look again mine says free for 1 month
You have a different offer that is free for a shorter timeframe which is different than the one that I and bnewt saw without defining the promotion period as I sent the question to DISH Care via Facebook Messenger and this is the response I got back 20 minutes ago.

1792177553912.webp
Almighty1
wonder why it says that
Answer 2 minutes ago from DISH Care via Facebook Messenger:
1792178974514.webp
bookworm370
Thanks, I tried it on the website first. I'll try it on the hopper
Darrell S
I tried on Hopper last night. Many more offers than the website has. I even got 3 free months of Gallery. Only offered 1 month on website
  • Like
Reactions: charlesrshell
long_time_Dish
I got Starz/Encore again for 50% off for 3 months yesterday.
  • Like
Reactions: charlesrshell
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68512 Replies · 2671715 views
  • Like
Reactions: c-spand
FTA4PA
Six O'Clock News - John Prine
  • Like
Reactions: sdfntx
Bobby
It's Five O'Clock Somewhere - Alan Jackson
harshness
Somewhere - Barbra Streisand
sdfntx
Somewhere in Time - John Barry
long_time_Dish
In Time - Kit Watkins
Former member 209992
Last reply · posted in SatelliteGuys Support Center
For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
540 Replies · 18281 views
  • Like
Reactions: charlesrshell
Scott Greczkowski
Was down due to an emergency update at the ISP. They did email me seconds before they took it down and apologized for the short notice.

However once the server was back online NGINX failed to start.

I was at the grocery store and just rebooted the entire server and everything came back up again.

Just got home from the grocery store I will bring in the groceries and then take a look at what NGINX failed the first time.
comfortably_numb
Was down due to an emergency update at the ISP. They did email me seconds before they took it down and apologized for the short notice.

However once the server was back online NGINX failed to start.

I was at the grocery store and just rebooted the entire server and everything came back up again.

Just got home from the grocery store I will bring in the groceries and then take a look at what NGINX failed the first time.

NGINX
The site uses Nugenix?!


View: https://youtu.be/_DhEEo5S9fg
Scott Greczkowski
Ok checked it out and for some reason the web server (NGINX) tried starting before the DNS resolver fully loaded. This is why it worked when I rebooted the machine.

Thanks to ChatGPT it had me change the NGINX config to prevent this from happening again.

With that said I can't prevent the ISP from doing emergency upgrades which was the cause of all of this.
navychop
Nature will develop better idiots.
  • Like
Reactions: charlesrshell
TRG
TRG
Nature will develop better idiots.
God help us.
brittanygarden
Staff member Pub Member / Supporter
Last reply · posted in DISH Network Support Forum
Please post your remote make/model here and any details of your issue. We are looking to collect as many examples as possible. I may reach out to you for your receiver number, but please do not post it here.

If you've already reported this to me, please repost it here so I can track all instances in one thread.

Thanks!
Brittany
22 Replies · 691 views
david_jr
I lost IR control of my H3 after the H398 update in September of 25. We were using the Harmony Hub remote system from Logitech. We have been using the H3 OEM remote to turn the receiver on and off ever since then.

H398 Software Version
bookworm370
I have a solution that is guaranteed to work.
All Hopper developers are required to turn in their RF Hopper remotes and use only IR remotes.

I guarantee you that the bug will be fixed in two days!
Try it; it will work! They will work 24 hours a day to fix it when the WAF goes into the toilet!
GRB1959
I have a solution that is guaranteed to work.
All Hopper developers are required to turn in their RF Hopper remotes and use only IR remotes.

I guarantee you that the bug will be fixed in two days!
Try it; it will work! They will work 24 hours a day to fix it when the WAF goes into the toilet!
Excellent suggestion.
Foxbat
As I was testing 4K on my Hopper 3 running H713 10/7/2026 by watching the NLCS Game 2 on Channel 148-01, I had been using my Dish 52.0 remote to navigate. I grabbed my Harmony One and pressed "Info". This caused the Hopper 3 to crash and restart.

After it restarted, the game finished so I pressed "Options" on the 52.0 remote to access the TV Activity screen. I pressed Select on the tuner with the NLCS game active and arrowed-down to select "Stop Recording". Again, the Hopper 3 crashed and restarted.

After it came back up, I used Recall to return to "Maine Cabin Masters" and when I tried the Options button again, I saw that the NLCS Game was still being recorded. I selected the game, arrowed-down to Stop recording, and this time it stopped recording and didn't crash.

Since I was watching an HD program instead of 4K, I tried the "Info" button and nothing happened. The Harmony One has an IR active indicator when it's transmitting so I know I pressed the button.

It looks like the 2nd or 3rd time I sent "Info" from the Harmony One, the Hopper 3 started to respond again. If I used the Dish 52.0 remote, the Hopper 3 stopped listening to the Harmony One IR commands. It looks like "Info" needs to be pressed twice and that seems to reactivate the IR recognition on the Hopper 3. It seems to stay active, but I didn't try leaving the Hopper 3 alone for an hour or more.
Bobby
As I was testing 4K on my Hopper 3 running H713 10/7/2026 by watching the NLCS Game 2 on Channel 148-01, I had been using my Dish 52.0 remote to navigate. I grabbed my Harmony One and pressed "Info". This caused the Hopper 3 to crash and restart.

After it restarted, the game finished so I pressed "Options" on the 52.0 remote to access the TV Activity screen. I pressed Select on the tuner with the NLCS game active and arrowed-down to select "Stop Recording". Again, the Hopper 3 crashed and restarted.

After it came back up, I used Recall to return to "Maine Cabin Masters" and when I tried the Options button again, I saw that the NLCS Game was still being recorded. I selected the game, arrowed-down to Stop recording, and this time it stopped recording and didn't crash.

Since I was watching an HD program instead of 4K, I tried the "Info" button and nothing happened. The Harmony One has an IR active indicator when it's transmitting so I know I pressed the button.

It looks like the 2nd or 3rd time I sent "Info" from the Harmony One, the Hopper 3 started to respond again. If I used the Dish 52.0 remote, the Hopper 3 stopped listening to the Harmony One IR commands. It looks like "Info" needs to be pressed twice and that seems to reactivate the IR recognition on the Hopper 3. It seems to stay active, but I didn't try leaving the Hopper 3 alone for an hour or more.
I think you have it. If you start up with the Harmony and then use the 54 remote it confuses the Hopper because you went from IR to RF. It seems to get cranky when you want to go back to the Harmony.
R
I think you have it. If you start up with the Harmony and then use the 54 remote it confuses the Hopper because you went from IR to RF. It seems to get cranky when you want to go back to the Harmony.
I checked this and you are correct. My Harmony 665 remote worked fine until my wife used the Dish remote. After the Dish remote is used I have to push or hold a button down until the 665 starts working again.
david_jr
I lost IR control of my H3 after the H398 update in September of 25. We were using the Harmony Hub remote system from Logitech. We have been using the H3 OEM remote to turn the receiver on and off ever since then.

H398 Software Version
BTW my bedroom H3 does not have this problem where I am using a Harmony 650. Also has there been any more feedback? Are they still working on this or what?
Foxbat
I think I have a separate issue with our Hopper 3 when watching/recording a 4K event. I have had many instances of it spontaneously restarting when I "disturbed" it during a 4K event. I learned to not touch the remote after a given point.

But it might be the IR code subroutine and 4K that make it touchy. I'll try it Wednesday night during the NLCS Game 3.
  • Like
Reactions: charlesrshell
JeffN9
I think I have a separate issue with our Hopper 3 when watching/recording a 4K event. I have had many instances of it spontaneously restarting when I "disturbed" it during a 4K event. I learned to not touch the remote after a given point.

But it might be the IR code subroutine and 4K that make it touchy. I'll try it Wednesday night during the NLCS Game 3.
I was having similar issues last night while watching and recording the NLCS game on 148. When I tried resuming the game at one point the screen went blank and I couldn't get my H3 to respond to any remote commands. Eventually the Hopper went to a HD channel but still no remote response. After a while the Hopper went into a re-boot cycle. This happened at least 3 times. I was using an IR universal remote only.

A little frustrating to have the game broken up like that but at least the Brewers won:)
bookworm370
Excellent suggestion.
Yea, I've only been a CIO for the last 30 years! :)
Trust me, when something important breaks, they get to own it!
meStevo
Lifetime Supporter
Last reply · posted in The Chit Chat Club
Continuing the Kilauea thread in the Pub here. Perhaps the Iceland one too next time there's remarkable activity.

Currently there is precursory lava flowing into the crater, leading to the next episode that'll probably start within the next day.

You can see the pace of inflation / deflation here. It serves as the primary predictor for when the expect the eruptions, which coincide w/ inflation turning into significant deflation and last for several hours on average with significant fountaining.



View: https://youtu.be/Uecu2seh4b4


Wife and I like the AfarTV feeds, for the discussion along w/ them, though they're otherwise just mirrors of the official USGS feeds.


View: https://youtu.be/iws3rh5vLAQ
120 Replies · 3265 views
  • Like
Reactions: osu1991
Foxbat
​
  • Like
Reactions: RaiderPower
Foxbat
Oooo, quite the show now. All three vents have doming and overflows. The cone that built up around the North vent lost its upper quarter at 02:50 Oct 17 and is now spewing lava at a healthy rate. Don't know if I would say it's a fountain, but it's close.


IMG_1534.webp

edit: The USGS has called the official start of Episode 55 as starting at 03:19 HST Oct 17, 2026:

Alert Level: WATCH, Color Code: ORANGE 2026-10-17 13:43:56 UTC
HVO/USGS Volcanic Activity Notice

Volcano: Kilauea (VNUM #332010)

Current Volcano Alert Level: WATCH
Current Aviation Color Code: ORANGE

Issued: Saturday, October 17, 2026, 3:43 AM HST
Source: Hawaiian Volcano Observatory
Notice Number: 2026/H488
Location: N 19 deg 25 min W 155 deg 17 min
Elevation: 4091 ft (1247 m)
Area: Hawaii

Summary: Episode 55 of the ongoing Halemaʻumaʻu eruption began at 3:19 AM HST on October 17, 2026.

Volcanic Activity:
Episode 55 of lava fountaining in Halemaʻumaʻu began at the summit of Kīlauea began at 3:19 AM HST on October 17, 2026.

Fountain heights are relatively low at about 100-150 feet (30-45 m), and it is not clear whether this episode will evolve to the same heights as previous episodes. Continuous overflows from the vents began yesterday, October 16, just before 6 a.m. HST and transitioned into episode 55 fountains at 3:19 a.m. HST this morning. The current forecast is for winds are blowing from the north-northeast direction, which suggests that volcanic gas emissions and volcanic material may be distributed to the south-southwest direction from Halemaʻumaʻu.
  • All eruptive vents and lava flows are confined to Halemaʻumaʻu crater within Hawaiʻi Volcanoes National Park. Tephra fall from volcanic ash clouds is greatest within 3 miles (5 km) of the vents, lighter ash and Pele's Hair may stay suspended for large distances from the vents.
Foxbat
Kīlauea seems to be returning to the "normal" eruption script, impressive fountaining from the North Vent. For once, the V2 Cam has the best overall shot:
IMG_1535.webp
The lava flows have covered a good portion of the Halemaʻumaʻu crater floor.
Foxbat
Looks like Episode 55 is over at 09:00 HST, just under six hours. The USGS said the fountains reached 720' or 220 meters.
​
  • Like
Reactions: RaiderPower