Social Feed

dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in TV Shows
Chicago Fire's first season finale - to air May 15 on NBC - will serve as a backdoor pilot for the potential series.

digitalspy.com
51 Replies · 7390 views
teachsac
Watched the 3 show crossover with Chicago Med and Chicago Fire. Really good. Great to see Hailey and Jay make an appearance.
  • Like
Reactions: dfergie
dfergie
Survivor ruled for us, still one behind on all 3 Chicagos...
teachsac
Survivor ruled for us, still one behind on all 3 Chicagos...
Won't watch Survivor until I get home Sunday.
dfergie
Watched the 3 show crossover with Chicago Med and Chicago Fire. Really good. Great to see Hailey and Jay make an appearance.
We watched yesterday, instead of "passing the buck" from one show to the other they kept most of the characters involved through all three... Good one.
dfergie
Anna Pigeon starts tonight on USA, has the former Hailey from PD…
osu1991
Last reply · posted in TV Shows
:clapping:cheer
CBS gives the go ahead for Captain Pike, Spock, Number One and The Enterprise to return in Star Trek: Strange New Worlds




921 Replies · 91789 views
Foxbat
What's going on? Two really good episodes of "Star Trek: Strange New Worlds". I'm worried that the next one will be "Musical Space Rift: The Flip Side" to restore some balance.

Best line was La'an spoiling "Star Trek III: The Search for Spock"
MikeD-C05
What's going on? Two really good episodes of "Star Trek: Strange New Worlds". I'm worried that the next one will be "Musical Space Rift: The Flip Side" to restore some balance.

Best line was La'an spoiling "Star Trek III: The Search for Spock"
They do have a puppet episode you might like. Don't know when but Anson Mount talked about it and showed the puppet on the View a week ago. Now if they could just combine that with the musical episode, everyone would be happy. :biggrin
primestar31
They do have a puppet episode you might like. Don't know when but Anson Mount talked about it and showed the puppet on the View a week ago. Now if they could just combine that with the musical episode, everyone would be happy. :biggrin
Voyage to the Bottom of the Sea did a puppet episode 59 years ago. It also had Vincent Price on it, so even better.
long_time_DNC
Voyage to the Bottom of the Sea did a puppet episode 59 years ago. It also had Vincent Price on it, so even better.
Watched that show every week, but don't remember that, but hey, I was 7 then... ;)
primestar31
Watched that show every week, but don't remember that, but hey, I was 7 then... ;)

View: https://youtu.be/YAym6so2rrM?si=dMaOf_KS8CeFBg2c
MikeD-C05

So there is a history of these puppet episodes going back to the 1960s. :biggrin
  • Haha
Reactions: long_time_DNC
primestar31
dead link
No, it's just restricted. Click on the bottom middle hyperlink that says: "Watch on Youtube"

Yes, that's a hyperlink...
long_time_DNC
No, it's just restricted. Click on the bottom middle hyperlink that says: "Watch on Youtube"

Yes, that's a hyperlink...
Got it. Forgot all about that episode. :)
  • Like
Reactions: primestar31
Y
The co-worker stabbing policy in Starfleet is a tad bit more forgiving than I think I would be comfortable with.

Not certain about ship moral after that decision.
long_time_DNC
What, no comments on E3?

It was Star Trek: Strange New Acid Trips, but there were some genuine laughs in there along with all the weirdness.

If they wanted to do a comedy, at least have a solid underlying story (e.g. The Trouble With Tribbles), but this really didn't have much of that at all (it was very thin).

So, for me, 2.5 out of 5 stars (YMMV). I rank this with the worst of season 2 eps.
  • Like
Reactions: Keith Brannen
ewindowman
Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Looks like dish is Bankrupt. Filling tomorrow Tuesday June 30th
381 Replies · 11041 views
S
We had a TV that didn't need fine tuning of UHF because the UHF dial had no steps.
  • Like
Reactions: charlesrshell
navychop
Anyone own a degausser, for CRTs or tapes?
  • Like
Reactions: charlesrshell
T
We had a TV that didn't need fine tuning of UHF because the UHF dial had no steps.
For whatever reasons (maybe someone on here knows), the VHF tuners had detents for the numbered ch's 2-13, with a fine-tuning ring surrounding the clicker knob, whilst the separate UHF tuners mostly had no fine-tuning ring but rather used "continuous tuning" wherein there were no detents and the knob would rotate multiple times in going through the UHF ch's. Thus somewhat slower in getting between ch's. There was a ch# indication that let you know what general area you were in, and typically you'd slightly overshoot your target and then need to go "back and forth" by small increments until it was fine-tuned. Thus UHF did have fine tuning- it was all fine tuning, without the quick steps to immediately get you in the neighborhood.

Some later sets attempted to solve the "problem" of UHF knob twisting by offering a slew of adjustable pots to pre-tune to available UHF ch's, such that a single keypress would result in a locked-in, fine-tuned UHF ch, but they were just more overcomplicated and fussy. I do think some also made a UHF knob with a whole bunch of detents for all of the ch's 14-73, but these were much less common
  • Like
Reactions: charlesrshell
N
I do think some also made a UHF knob with a whole bunch of detents for all of the ch's 14-73, but these were much less common
Yes they did and you can "blame" the FCC for this improvement.
  • Like
Reactions: charlesrshell
ERSanders
Anyone own a degausser, for CRTs or tapes?
I used my Weller soldering gun from 1957 to degauss TVs. Just run the iron in increasing circles around the item while moving it slowly away.
M
Anyone own a degausser, for CRTs or tapes?
yup. 1967-68. I would adjust the neighborhood for a few $$. Also had a portable tube tester. As a kid we would go to Thrifty Drugs about 2x / year to test and buy replacement tubes.
  • Like
Reactions: charlesrshell
navychop
I wish I could do that today.
  • Like
Reactions: charlesrshell
T
Well, we kind of did it all over again with C-band and/or DiSH, those of us who did it and weren't a "sell only" "retailer". I liked helping people get better TV. Not so much the corp. in CO seemingly determined to thwart my efforts
K
Pub Member / Supporter Lifetime Supporter
Last reply · posted in TV Shows
I'll be starting this sometime this week but everything I have read says it is awesome.

Season 2 on the way: Prime Video's Reacher Renewed for Season 2, Three Days After Release
59 Replies · 7572 views
  • Like
Reactions: Foxbat and FTA4PA
K
Some season 4 news:

Alan Ritchson Teases 'Intensely Physical' Reacher Season 4 After Filming Cameo in Neagley Spinoff

I had not read anywhere before there is Neagley spin-off series on the way.
KAB
KAB
Some season 4 news:

Alan Ritchson Teases 'Intensely Physical' Reacher Season 4 After Filming Cameo in Neagley Spinoff

I had not read anywhere before there is Neagley spin-off series on the way.
Yeh, for about a year.
  • Like
Reactions: Foxbat
Jimbo
IF and that may be a Big IF,
The Terminater ever comes back for yet another Movie, Arnold isn't doing it ...
I think Alan Ritchson should play his part ... I could see Arnold in a lot of Alan.
  • Like
Reactions: Foxbat
K
Season 4 premieres on August 12, concluding on September 16.

Neagley spinoff drops on September 16.
dfergie
We just started S3, we watched S1 and S2 then had a squirrel moment I guess as we both like it.
Win win I think finish S3 then hit S4 hot and heavy...
  • Like
Reactions: osu1991
Mister B
Pub Member / Supporter
Last reply · posted in DISH Network Support Forum
I am seeing that software version 711 downloaded this morning. I am seeing an indicator of how long I have paused a live show just to the right of the timeline near the bottom of the screen. I wonder if this is meant to fix the pause bug that other members have been discussing?
12 Replies · 162 views
ERSanders
I am seeing that software version 711 downloaded this morning. I am seeing an indicator of how long I have paused a live show just to the right of the timeline near the bottom of the screen. I wonder if this is meant to fix the pause bug that other members have been discussing?
It appears that it has fixed the issue I reported re: the inability to restart after a pause.
T
It appears that it has fixed the issue I reported re: the inability to restart after a pause.
That would be great if that is indeed fixed, Wonder if they fix the issue with issue with my red dwarf recordings, there 51 of them but only 50 of them in are the "red "dwarf" folder with 1 them listed separated, the one episode I need "different timer" to record cause meta data was wrong despite the title the same my OCD demands I find out. sadly no 711 here
I see that if you press the "Recall" button on the remote when you have the "Info" up on the screen, it now shows the transponder and signal strength, as well as which satellite. In the past, it only showed which satellite. I am talking about on a H3.

If you try this on a Joey, signal strength and transponder are not available, only the satellite info.

Any rate, a nice feature on the H3!
That nice know what signal for channel and transponder, but should really be added to joeys too!


Would seem 710 change the "upgrade receiver" screen it now ask if you want do now or later
  • Like
Reactions: charlesrshell
Bobby
That would be great if that is indeed fixed, Wonder if they fix the issue with issue with my red dwarf recordings, there 51 of them but only 50 of them in are the "red "dwarf" folder with 1 them listed separated, the one episode I need "different timer" to record cause meta data was wrong despite the title the same my OCD demands I find out. sadly no 711 here

That nice know what signal for channel and transponder, but should really be added to joeys too!


Would seem 710 change the "upgrade receiver" screen it now ask if you want do now or later
Joeys are a client of the Hopper. They have no tuners and are really pretty dumb.
  • Like
Reactions: charlesrshell
T
Joeys are a client of the Hopper. They have no tuners and are really pretty dumb.
Yes am perfectly aware from what joeys are for and do and dont do.
  • Like
Reactions: charlesrshell
Bobby
Yes am perfectly aware from what joeys are for and do and dont do.
Then you know the reason why Joeys are unable to tell you what the satellite, transponder, and signal steength is for the channel you are watching. All of that information is on the Hopper alone, its source.
  • Like
Reactions: charlesrshell
T
Then you know the reason why Joeys are unable to tell you what the satellite, transponder, and signal steength is for the channel you are watching. All of that information is on the Hopper alone, its source.
If it can show the satellite the channel is on when using a joey info>recall *and it has done that for very long time* , there no reason why H3 can just show the transponder and signal strength on the joey too. If joey cant see any of info then how can joey see the channels satellite gnome magic?

Either way update did not fix problem the rogue recording not in being in correct folder for the "Series"

Live buffer pause bug does seem fixed but i only test it once on like 5 minutes pause
  • Like
Reactions: charlesrshell
Bobby
Maybe when the Joeys update to the 11series, and I don't believe they have yet, it will allow the signal strength as well as the transponder.
  • Like
Reactions: charlesrshell
zippyfrog
Pub Member / Supporter Lifetime Supporter
Last reply · posted in DISH Network Support Forum
Over the past year I have been tracking the changes on Western Arc. The past 3 months have had a lot of changes that I posted in the other MPEG2 Western Arc shutdown thread. Now that 129 is (basically) out of commission, here is where Western Arc stands. This is just a national channel list, (no local channels) based off what I can see and what others have contributed. Thanks to everyone who has helped me come up with the locations of some of the channels – I would try and list all of you out, but I know I would forget someone! As has been suggested in other parts of the forum, it would be great to collect the spotbeam data for those who could contribute!

A couple of pieces of info:
  • Out of the 64 transponders between 110/119, there are currently 50 transponders that Dish is licensed to use. 22 are Spotbeams, 28 are ConUS transponders (14 transponders are licensed to DirecTV and Dish doesn't have access to them)
  • Those 28 ConUS transponders are divided as follows:
    • 10 are dedicated to National HD channels (ESPN, CNN, Disney Channel, etc). Dish is maxing out at 16 HD channels per transponder (note – in an earlier post I said there was one transponder with 17 HD channels, that was an error on my part. When I double checked my listings, one channel changed transponders). Before the transition, there was a maximum of 14 HD channels per transponder.
    • 1 transponder is dedicated to adult content
    • 2 are a mixture HD PPV Movies/4k channels
    • 3 are set aside for HD Sports channels that are only on for live games (NBA League Pass, the PAC 12 alternate channels, some PPV events, etc); 3 SD PPV Sports Channels are there as well.
    • 7 are for SD and/or music channels. Dish is maxing out at 26 SD channels per transponder thus far on the SD transponders.
    • 5 transponders on 110 I have no channels listed but Dish operates. (they are labeled as ConUS on my chart below) There are other things that could be on those transponders, like RV Distant Networks, internal testing channels, etc, that I can't see. They might be able to be used for additional content, but I am not sure exactly what is on those transponders.
There are two transponders that have lower than normal SD channels – 110, TP 21 and 119, TP 19. Previously those transponders contained the programming guides that get downloaded from the satellite when the receivers download EPG. I assume that is where the programming guides are still downloaded from, thus less channels there.

When I talk about number of channels on a transponder, all my numbers are unique channels – for example, channel 101 and 199 are the same channel mapped to two different numbers, but in terms of space, only takes up 1 channel worth of bandwidth on the transponder.

Finally, I have to give Dish a ton of credit. When it was 110/119/129, Dish had 82 transponders they were using – it took a lot to get it down to 50 transponders and figure out where all the pieces were going to go. What are the things they did to get there? Here are the things I saw:
  • During this migration from 129, Dish converted 7 ConUS transponders on 119 into Spotbeams – that is how they ended up fitting on all the HD locals that used to be on 129. (for those interested, TP 6, 7, 8, 9, 10, 11, 13 are the ones that used to be ConUS on 119 that are now Spotbeam)
  • Removed almost all SD duplicate channels that are offered in HD
  • Converted remaining SD channels from MPEG2 to MPEG4
  • There are also 2 subtle things that changed from the HD channel perspective
    • At the beginning of the transition, Dish decreased the number of PPV Movie channels – prior to this transition the PPV channels HD PPV movies were 502-522; now they are 502-517.
    • At the beginning of April when MLB, NBA, and NHL regular seasons were all going on at the same time and this transition began, there were a ton of games "joined in progress" for the HD feeds. That wasn't common since the days before the full time HD RSN's. The reason for that was prior to the transition, Dish had 4 transponders set aside for HD Sports – 2 transponders was the bandwidth set aside from the HD RSN's before Dish dropped the RSN's, then 2 transponders were for alternate channels. Now we are down to 3 transponders for HD sports.
240 Replies · 63543 views
navychop
Short packing list. Left out the libations…..
:whistle
  • Like
Reactions: charlesrshell
M
If 110 was to be for locals, why are my Sacramento local channels on 119 / Transponder 1 ?? Last month they were on 110. Thanks for your updates, truly appreciated.
MPH in CA
zippyfrog
If 110 was to be for locals, why are my Sacramento local channels on 119 / Transponder 1 ?? Last month they were on 110. Thanks for your updates, truly appreciated.
MPH in CA
Unless I missed it, we don't know for sure what Dish's plans are with 110 and 119. I don't know if there has been a press release or document that says their plans. However, the 110 satellite can easy handle all locals for all markets and there are more than enough spotbeams to cover everything. Over the years I have been tracking moves, it isn't unlike Dish to play musical chairs with where channels go until they end up at a long-term resting spot.

The other piece is that a transponder can't function a ConUS (National channels) and spotbeams. Right now on 110, there are still 11 transponders that are ConUS. It could be that once those are running as Spotbeams, Sacramento could be on one of those. Chicago locals used to be on spotbeams on 110 TP 31; now the locals are on 110 TP 12 and 110 TP 26. And in Chicago with the new satellite at 110, TP 31's spotbeams don't get near our area.
zippyfrog
Well, these past couple of months have been a lot more boring than I was expecting. I thought for sure by August 1 we were going to see all national HD channels off of 110.

Right now, here is what we have - 43 National HD channels left on 110.

110, TP 01: 7 channels ( TNT, OAN, Paramount Network, TBN, HBO Latino, Indieplex, Tennis)
110, TP 02: 15 channels (ESPNews, Fox Sports 2, GFamily, AXS, WeatherNation, RFD, C&I, Comet, Smithsonian, Retroplex, FXM, Sony, Pixl, Sportsman, Movie Channel East)
110, TP 04: 4 channels (Cinemax East, Encore Esp, TUDN, MGM+ Hits)
110, TP 07: 3 channels (Magnolia, Hallmark Movies, Discovery Turbo)
110, TP 12: 14 channels (FXX, Fuse, Dest. America, BITV, Fox Weather, BET Her, Logo, MTV Live, Universo, Fox Deportes, Showtime East, Showtime BET, Starz West, Starz Edge)

I thought for sure all of these would have been moved to 119. I was wrong! After moving locals from 119 to 110, the 119 transponders that used to be spotbeams do have room for the channels to be moved to. So very surprised they are still on 110.

There are still a ton of national SD channels and music channels on 110, as well as the PPV Movie Channels and 16 channels that are used for sports.
D
824 Baby TV has ceased operations (on all providers)
  • Like
Reactions: charlesrshell
N
Last reply · posted in DISH Network Support Forum
My OTA is not working anymore. This started after the latest update. I have the OTA dongle with a OTA antenna that I've been using for years. My hopper does not recognize the dongle anymore and when I go to the OTA setting, it has a screen that says to plug a dongle into the USB. I tried unplugging and plugging back, in the same usb port and other ports. The Hopper does not recognize it. Anyone have same issue?
29 Replies · 622 views
  • Like
Reactions: charlesrshell
J
My OTA is not working anymore. This started after the latest update. I have the OTA dongle with a OTA antenna that I've been using for years. My hopper does not recognize the dongle anymore and when I go to the OTA setting, it has a screen that says to plug a dongle into the USB. I tried unplugging and plugging back, in the same usb port and other ports. The Hopper does not recognize it. Anyone have same issue?
I'm having the same issue. It all started with the latest update. Mine would randomly reboot, picture would jump in and out and it totally crashed my OTA channels. I called dish tech and after an hour on the phone they shipped me a replacement hopper 3. Hopefully it works..
dishstaller
they shipped me a replacement hopper 3.
Been hearing that from several customers. Problem is that if you are on EA, a H3 virtually won't download. I finally repointed to WA and the issue went away.
HipKat
Been hearing that from several customers. Problem is that if you are on EA, a H3 virtually won't download.
That's not true. And "virtually"?? Sure you know what that means?
dishstaller
That's not true. And "virtually"?? Sure you know what that means?
Ummm, YES, it IS. It is a major problem right now. Now you CAN download off EA if you do multiple forced downloads...that is where you press the up button on the H3 while it is booting up. Technically it is called a boot strap recovery. This kills a LOT of time and it is something a customer would really have a hard time navigating through.
But THAT is the reason I used the term virtually, because for most people it is a non-starter.
Actually had a Dish customer reach out to me last week. Dish had sent them a replacement H3. After over an hour the Dish online tech gave up and set them up for a svc call about 10 days out. They are on EA. I told them if they wanted they could run the rec up to my store and I'd hook it up to a WA dish and it would download properly....they did and it did.
HipKat
Ummm, YES, it IS. It is a major problem right now. Now you CAN download off WA if you do multiple forced downloads...that is where you press the up button on the H3 while it is booting up. Technically it is called a boot strap recovery. This kills a LOT of time and it is something a customer would really have a hard time navigating through.
But THAT is the reason I used the term virtually, because for most people it is a non-starter.
Actually had a Dish customer reach out to me last week. Dish had sent them a replacement H3. After over an hour the Dish online tech gave up and set them up for a svc call about 10 days out. They are on EA. I told them if they wanted they could run the rec up to my store and I'd hook it up to a WA dish and it would download properly....they did and it did.
So what you're saying is that people who live in EA only markets can't download software.... You're doing a good job of channeling your old buddy there
  • Like
Reactions: charlesrshell
dishstaller
So what you're saying is that people who live in EA only markets can't download software.... You're doing a good job of channeling your old buddy there
It depends on what you mean by download software. The EA CAN download updates when they come out. What I was discussing, very plainly, was that it is extremely hard to do the INITIAL software download, so yes, if a customer who is on EA gets a replacement H3 shipped to them, they are not going to be able to download it. The technique I mentioned on how you CAN download it on EA would require a customer svc rep to stay on the phone with them for hours....literally.

How in the world am I "channeling" someone when all I am doing is presenting the facts...facts that every retailer and installer are very well acquainted with.
JSheridan
So what you're saying is that people who live in EA only markets can't download software.... You're doing a good job of channeling your old buddy there
Hey man. I gotta say that working through the initial wizard on a 'new' Hopper3 is a no go on the EA. The only way it works for us now is the boot strap recovery then a couple of reboots during the wizard when it gets hung up. I do it at the shop so I start it and go do something else. The whole process takes a long time now. We don't do a lot of Dish installs anymore so it's something we just deal with.

Hope things are going your way and you're not overheating out there.
dishstaller
I do it at the shop so I start it and go do something else.
That's what I did initially. It was a real time killer. Can't remember now how I found out about the WA working.....think I talked to a dealer out in CO.
  • Like
Reactions: charlesrshell
jbones
My OTA is not working anymore. This started after the latest update. I have the OTA dongle with a OTA antenna that I've been using for years. My hopper does not recognize the dongle anymore and when I go to the OTA setting, it has a screen that says to plug a dongle into the USB. I tried unplugging and plugging back, in the same usb port and other ports. The Hopper does not recognize it. Anyone have same issue?
I am also having the same issue all of a sudden they are gone and nothing I do is letting the hopper recognize the OTA adapter. I have had this working for years and all of a sudden out of nowhere it no longer works, very annoyed by this haven't called in yet but guess I'm going to have to.
HipKat
It depends on what you mean by download software. The EA CAN download updates when they come out. What I was discussing, very plainly, was that it is extremely hard to do the INITIAL software download, so yes, if a customer who is on EA gets a replacement H3 shipped to them, they are not going to be able to download it. The technique I mentioned on how you CAN download it on EA would require a customer svc rep to stay on the phone with them for hours....literally.

How in the world am I "channeling" someone when all I am doing is presenting the facts...facts that every retailer and installer are very well acquainted with.
Because it's not a fact. We set up replacement Hoppers on EA almost daily, as there are three EA-only markets in our region. Do you think refurbs get sent out with no software?? Every download is an update. And EA downloads software no differently than WA
  • Like
Reactions: charlesrshell
HipKat
Hey man. I gotta say that working through the initial wizard on a 'new' Hopper3 is a no go on the EA. The only way it works for us now is the boot strap recovery then a couple of reboots during the wizard when it gets hung up. I do it at the shop so I start it and go do something else. The whole process takes a long time now. We don't do a lot of Dish installs anymore so it's something we just deal with.

Hope things are going your way and you're not overheating out there.
The heat is killing me. Don't you guys have access to the USB Software updates? I must be missing something. Every Hopper we get has production software, usually several updates behind, which gets caught up with the overnight update after install, or we have updateable USB sticks that we can flash the newest software on. I never do that, myself. I have a workaround to avoid the initial software download
  • Like
Reactions: charlesrshell
M
Last reply · posted in Cable Television and Fiber Providers
Here's one cable owner who is trying to keep his cable company above water.

1 Replies · 17 views
navychop
Can only read a little bit before the unpassable pitch.

But it's Business Insider, so NBD.
jamieh1
Last reply · posted in DIRECTV Programming Forum
DIRECTV Stream/Internet added Ch 4105 SportsGrid
262 Replies · 37677 views
  • Like
Reactions: c-spand and KyL416
K
They're testing the 24/7 news streams for the ABC O&Os:
KFSN Fresno
WPVI Philly
KTRK Houston
KGO Bay Area
WLS Chicago
KABC Los Angeles
WABC New York
WTVD Raleigh-Durham
  • Like
Reactions: mario315
Y
They're testing the 24/7 news streams for the ABC O&Os:
KFSN Fresno
WPVI Philly
KTRK Houston
KGO Bay Area
WLS Chicago
KABC Los Angeles
WABC New York
WTVD Raleigh-Durham

Would everyone get these or just that market?
lordodogg
everyone I'm sure, I believe they're already available to everyone on other services
harshness
everyone I'm sure, I believe they're already available to everyone on other services
Theoretically, these streams are available from each station's website.

Roku and perhaps Amazon Prime deliver may of them as well.
K
Would everyone get these or just that market?
The API has them geoblocked to their respective DMAs, similar to what Samsung TV+, LG Channels, Plex and some others do with the local news streams, and what Pluto does with the FOX Local, NBC and city specific WeatherNation streams.
K
They're now live in their respective markets:
4051 WABCFAST (NYC only)
4052 KABCFAST (LA only)
4053 WLSFAST (Chicago only)
4054 WPVIFAST (Philly only)
4055 KTRKFAST (Houston only)
4056 KGOFAST (San Francisco only)
4057 KFSNFAST (Fresno only)
4058 WTVDFAST (Raleigh only)

EDIT: They are available nationwide for streaming customers, DMA only for sat customers
S
They're now live in their respective markets:
4051 WABCFAST (NYC only)
4052 KABCFAST (LA only)
4053 WLSFAST (Chicago only)
4054 WPVIFAST (Philly only)
4055 KTRKFAST (Houston only)
4056 KGOFAST (San Francisco only)
4057 KFSNFAST (Fresno only)
4058 WTVDFAST (Raleigh only)

EDIT: They are available nationwide for streaming customers, DMA only for sat customers
I have the entertainment + news duo and I only get the local LA channel. What's interesting I have another ID that is myFree only and I get all of them on that ID.
jamieh1
I have the entertainment + news duo and I only get the local LA channel. What's interesting I have another ID that is myFree only and I get all of them on that ID.
Confirmed here also. Logged in my free Directv acct and get all as well. And I'm not in any of those markets.
They should make them free for all signature customers as well.
  • Like
Reactions: mario315
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 4 views
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
67695 Replies · 2664882 views
  • Like
Reactions: c-spand
dishstaller
Funk #49 - James Gang
long_time_DNC
Back On The Chain Gang - The Pretenders
  • Like
Reactions: gms49ers
gms49ers
Back in Black - AC/DC
dishstaller
Blue on Black - Kenny Wayne Shepherd
long_time_DNC
Black Friday - Steely Dan