Social Feed
?Boy, do I need a manual or a lot of help!I bought one of the original paraclipse 12 ft classic antennas with the standard Polar T linear actuator drive. It performed without missing a lick until I took it down and completely disassembled it for a long distance move with a moving van with similar items taped together and wrapped with moving quilts. I used a couple of pieces of masonite to protect the panels and keep them flat. Everything arrived safely 1200 miles away. The dish was moved again for a few miles, then moved again to the final destination in central Texas. I can't inventory all of the parts, because of not having a list of material, but from memory, it looks like everything is here and undamaged although it has been 19 years since it was disassembled for the original move.
This version does not have any grooves in the ribs for the mesh to slide in and instead uses wire U clips to go across the ribs to hold the panels in place at the ribs. I also remember that this version assembles the mesh panels differently then some of the others because of the method used to hold the panels to the ribs. I did download a manual for a later version that uses the wonderful Horizon to Horizon actuator, but a lot of things are quite different on the polar T version. I also replaced the button hook with the factory 4 pole LNB mount kit.
Fortunately, I bought a new package of j clips, which I unpacked after 19 years of storage. There are lots of J clips, but no U clips. Since the J clips are made from .045 aluminum wire (probably welding wire), I assume this is the best choice for the U clips but not the cheapest since the wire comes in huge spools!
I was so happy that they included two Deldrin washers (.120 thick and .125 thick), although the original had a single machined nylon washer and I am not sure where two washers go. The Polar T actually pivots the entire antenna on a single 3/4 inch bolt that fits in two bronze bushings (that probably need to be greased when assembled again). The 3/4 inch bolt then fits through two holes in an offset C bracket that bolts to the rear hub.
The C Bracket had an 1/8 inch aluminum shim at the top to further space it from the rear hub probably to set the declination angle. They sent me two more of these, one was .059 thick aluminum, and the other was .030 thick plastic. I have no idea which one(s) I need to use. I am about 1 degree latitude further South now that at the original location. ( I can calculate the required shim for the declination angle, if it is not listed in the manual)
I found a place that sells 3.5 inch od pipe for $2.95/foot and I believe it will take about 7 1/2 feet. A lot of rock in the soil, so will dig the hole BEFORE I go buy the pipe and hopefully, will be able to buy it Monday.
I have a place cleared in the barn and the basic pieces laid out for assembly. I plan to guess at the correct bolt sizes and lengths and do a loose assembly.
Boy, do I need a manual! If anyone has one, please let me know and I would be glad to pay for the postage, scan it, and return it to you.
? I sincerely appreciate any help in getting this beautiful antenna back up in the air again!
42 Replies
·
20577 views
Update of 16 ft Paraclipse dish Installation
Couldn't dig a hole 5 ft deep!!!!! Used tractor augar to dig to solid rock at 3 ft, used 70# jackhammer and it just jumped up and down on the solid granite rock!!!! Enlarged hole significantly at bottom, welded piece of angle iron to pipe, cut off six inches so had 4.5 feet sticking out of ground, and poured concrete! Took 3 of us to set the dish up and bolt it in place after it was fully assembled.
Had to make about 100 of the U clips out of aluminum welding wire. Still have the last small panel to install and a few more U clips to tie the last two panels together. This photo was taken with the antenna on the ground and facing NW without LNB. Had to borrow my wife's iPad to photograph the satellite arc superimposed on the dish at its final location.
Hopefully a few more days, the system should be working.
Looks like Intelsat 903 will be my East satellite at the tree line with an Orbital Position of -34.5 degrees and a Elevation of 13.5 degrees. Completely clear to the horizon to the West.
Couldn't dig a hole 5 ft deep!!!!! Used tractor augar to dig to solid rock at 3 ft, used 70# jackhammer and it just jumped up and down on the solid granite rock!!!! Enlarged hole significantly at bottom, welded piece of angle iron to pipe, cut off six inches so had 4.5 feet sticking out of ground, and poured concrete! Took 3 of us to set the dish up and bolt it in place after it was fully assembled.
Had to make about 100 of the U clips out of aluminum welding wire. Still have the last small panel to install and a few more U clips to tie the last two panels together. This photo was taken with the antenna on the ground and facing NW without LNB. Had to borrow my wife's iPad to photograph the satellite arc superimposed on the dish at its final location.
Hopefully a few more days, the system should be working.
Looks like Intelsat 903 will be my East satellite at the tree line with an Orbital Position of -34.5 degrees and a Elevation of 13.5 degrees. Completely clear to the horizon to the West.
Well the system worked for a while, until the Monster Motor 24 inch actuator (1 5/8 inch diameter) got a little gust of wind! Even though it was listed for up to 12 foot dish, the clamp on the actuator could not hold the actuator and prevent it from slipping (even with rubber in the clamp). Back to full size (2 inch diameter) actuators.
That's not looking good!
The inability of the clamp to hold, no matter how tightly bolted down or with rubber lining, was the major contributor to the failure. At least now I know why Paraclipse added a safety cable to later production units. Wish I knew the dimensions of it and I would make one for mine. It looks like it keeps the dish from flopping even if the actuator clamp slips! Most of the import items today have absolutely no specifications for them and buyer beware is the guarantee! I actually had radiator type clamps on both sides of the actuator clamp, and that didn't help either.
Staff member
HERE TO HELP YOU!
Cutting Edge
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
67106 Replies
·
2662252 views
Pub Member / Supporter
Lifetime Supporter
Did anyone have a price increase today on their equipment? I own my VIP211k's, and they have been $5.00. My bill that I received last week shows the "add-ons" as being $5.00. However, I just logged into my Dish account, and my "add-ons" are now $10.00. Did the additional receivers go up by $5.00 recently?
As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.
As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.
0 Replies
·
12 views
Staff member
HERE TO HELP YOU!
Cutting Edge
Our DNS provider is encouraging us to enable DNSSEC on our domains for added security.
I have gone ahead and enabled it, and am told it may take anywhere from 90 minutes to 24 hours for it to take effect.
Hopefully doing this does not harm the site in any way. (It shouldn't) but if it does, you will then know why and I will revert the settings.
But from what I am reading it should be ok. so just giving a warning as I have screwed up DNS stuff in the past.
I have gone ahead and enabled it, and am told it may take anywhere from 90 minutes to 24 hours for it to take effect.
Hopefully doing this does not harm the site in any way. (It shouldn't) but if it does, you will then know why and I will revert the settings.
But from what I am reading it should be ok. so just giving a warning as I have screwed up DNS stuff in the past.
1 Replies
·
24 views
Ham Radio 2.0
Time for another AWESOME video from Ham Radio 2.0!
View: https://www.youtube.com/watch?v=erpXkKWLg54
Direct YouTube Link - I Went Wardriving for Meshtastic and Meshcoree Nodes!
Ham Radio 2.0 Website
Ham Radio 2.0 on Facebook
View: https://www.youtube.com/watch?v=erpXkKWLg54
Direct YouTube Link - I Went Wardriving for Meshtastic and Meshcoree Nodes!
Ham Radio 2.0 Website
Ham Radio 2.0 on Facebook
0 Replies
·
4 views
Staff member
HERE TO HELP YOU!
Cutting Edge
Due to security concerns and the fact that the Tapatalk Plugin for Xenforo is no longer being updated we have removed Tapatalk support from SatelliteGuys.
For those who were using it we recommend using our PWA App instead which is faster and does not have all the spam Tapatalk had. Below is a graphic showing how to add SatelliteGuys to your devices home screen. (While iOS is shown the process is mostly the same for Android.)
Thanks for your understanding.
For those who were using it we recommend using our PWA App instead which is faster and does not have all the spam Tapatalk had. Below is a graphic showing how to add SatelliteGuys to your devices home screen. (While iOS is shown the process is mostly the same for Android.)
Thanks for your understanding.
7 Replies
·
179 views
Actually, PWA stands for "Progressive Web Application" and is basically just saving a site's homepage to your desktop where it appears as an "App" with the rest of your smartphone's Apps.
A PWA is a custom version of SatelliteGuys which is optimized for mobile devices. While it may look like the website, its actually different so that only the files needed for mobile are sent, meaning its a much faster experience all around.
TapaTalk is essentially dead. It was written for PHP 5.4 and we are now running PHP 8.4. There have been a LOT of PHP security updates since then and since Tapatalk for Xenforo has not been updated in a long long time it is not the safest idea to keep running it.
In addition those trying to view the site on their mobile devices using a browser were getting spammed on the top of the screen for people to install TapaTalk, this ad in some cases would take up 20% of the users screen. We could get rid of that ad but we would have to pay $20 a month to get rid of it.
In addition TapaTalk could and was inserting their own ads on SatelliteGuys in the app which only benefitted them, SatelliteGuys was not paid for those ads they were displaying on our site. Again we could pay to get rid of those ads.
And here was the cost of the Premium Tier.
Now to make matters worse Tapatalk recently announced that they are going to start charging users of the app 99 cents a month to continue using it.
So soon you would be paying them each month to access SatelliteGuys via their app, again all the money going to them... and you would still see all their ads too.
Tapatalk was a great program which we run for many many years, and for a long time we DID pay for the premium tier. But now with such a small offset using it (My numbers show a total of 6 members) it wasn't work paying for any longer.
In addition Tapatalk was sold to a different owner who made lots of promises of improvements and updates but then that owner has been really radio silent since, instead they have been letting TapaTalk rot on the vine.
If you visit their support forum at https://www.tapatalk.com/groups/tapatalksupport/ you will see there is not much going on, in fact most of the support questions posted there go unanswered.
Please give the PWA a try, I was a die hard Tapatalk user myself but now only use the PWA on devices. It is a much better all around experience, with no bloatware or additional ads based on your user membership level.
I don't have an android phone so I could not make a graphic showing you how to add SatelliteGuys PWA to your phones apps or home screen. But here is a site that explains how to do it on all kinds of devices. How to Install a PWA on iOS, Android, Windows & Mac [2025 Guide]
The above link also explains PWA's better as well.
If Tapatalk were to update their plugins so we know we are more secure and up to date and allow us to remove the "Smart Banner" without having to pay $20 a month, we would consider adding it back. I don't even care about their ads, as if a user wants to use their app and is willing to sit through their ads in order to use that app then I am ok with it.
But hopefully that explains better why it was removed. It was not done to cut anyone off from the site. Please give the PWA a try.
TapaTalk is essentially dead. It was written for PHP 5.4 and we are now running PHP 8.4. There have been a LOT of PHP security updates since then and since Tapatalk for Xenforo has not been updated in a long long time it is not the safest idea to keep running it.
In addition those trying to view the site on their mobile devices using a browser were getting spammed on the top of the screen for people to install TapaTalk, this ad in some cases would take up 20% of the users screen. We could get rid of that ad but we would have to pay $20 a month to get rid of it.
In addition TapaTalk could and was inserting their own ads on SatelliteGuys in the app which only benefitted them, SatelliteGuys was not paid for those ads they were displaying on our site. Again we could pay to get rid of those ads.
And here was the cost of the Premium Tier.
Now to make matters worse Tapatalk recently announced that they are going to start charging users of the app 99 cents a month to continue using it.
So soon you would be paying them each month to access SatelliteGuys via their app, again all the money going to them... and you would still see all their ads too.
Tapatalk was a great program which we run for many many years, and for a long time we DID pay for the premium tier. But now with such a small offset using it (My numbers show a total of 6 members) it wasn't work paying for any longer.
In addition Tapatalk was sold to a different owner who made lots of promises of improvements and updates but then that owner has been really radio silent since, instead they have been letting TapaTalk rot on the vine.
If you visit their support forum at https://www.tapatalk.com/groups/tapatalksupport/ you will see there is not much going on, in fact most of the support questions posted there go unanswered.
Please give the PWA a try, I was a die hard Tapatalk user myself but now only use the PWA on devices. It is a much better all around experience, with no bloatware or additional ads based on your user membership level.
I don't have an android phone so I could not make a graphic showing you how to add SatelliteGuys PWA to your phones apps or home screen. But here is a site that explains how to do it on all kinds of devices. How to Install a PWA on iOS, Android, Windows & Mac [2025 Guide]
The above link also explains PWA's better as well.
If Tapatalk were to update their plugins so we know we are more secure and up to date and allow us to remove the "Smart Banner" without having to pay $20 a month, we would consider adding it back. I don't even care about their ads, as if a user wants to use their app and is willing to sit through their ads in order to use that app then I am ok with it.
But hopefully that explains better why it was removed. It was not done to cut anyone off from the site.
Please give the PWA a try.
I just installed the PWA on my Android phone. It was pretty easy to do, and now I'm posting this from my phone. Thanks, Scott!A PWA is a custom version of SatelliteGuys which is optimized for mobile devices. While it may look like the website, its actually different so that only the files needed for mobile are sent, meaning its a much faster experience all around.
TapaTalk is essentially dead. It was written for PHP 5.4 and we are now running PHP 8.4. There have been a LOT of PHP security updates since then and since Tapatalk for Xenforo has not been updated in a long long time it is not the safest idea to keep running it.
In addition those trying to view the site on their mobile devices using a browser were getting spammed on the top of the screen for people to install TapaTalk, this ad in some cases would take up 20% of the users screen. We could get rid of that ad but we would have to pay $20 a month to get rid of it.
View attachment 191729
In addition TapaTalk could and was inserting their own ads on SatelliteGuys in the app which only benefitted them, SatelliteGuys was not paid for those ads they were displaying on our site. Again we could pay to get rid of those ads.
View attachment 191730
And here was the cost of the Premium Tier.
View attachment 191731
Now to make matters worse Tapatalk recently announced that they are going to start charging users of the app 99 cents a month to continue using it.
View attachment 191732
So soon you would be paying them each month to access SatelliteGuys via their app, again all the money going to them... and you would still see all their ads too.
Tapatalk was a great program which we run for many many years, and for a long time we DID pay for the premium tier. But now with such a small offset using it (My numbers show a total of 6 members) it wasn't work paying for any longer.
In addition Tapatalk was sold to a different owner who made lots of promises of improvements and updates but then that owner has been really radio silent since, instead they have been letting TapaTalk rot on the vine.
If you visit their support forum at https://www.tapatalk.com/groups/tapatalksupport/ you will see there is not much going on, in fact most of the support questions posted there go unanswered.
Please give the PWA a try, I was a die hard Tapatalk user myself but now only use the PWA on devices. It is a much better all around experience, with no bloatware or additional ads based on your user membership level.
I don't have an android phone so I could not make a graphic showing you how to add SatelliteGuys PWA to your phones apps or home screen. But here is a site that explains how to do it on all kinds of devices. How to Install a PWA on iOS, Android, Windows & Mac [2025 Guide]
The above link also explains PWA's better as well.
If Tapatalk were to update their plugins so we know we are more secure and up to date and allow us to remove the "Smart Banner" without having to pay $20 a month, we would consider adding it back. I don't even care about their ads, as if a user wants to use their app and is willing to sit through their ads in order to use that app then I am ok with it.
But hopefully that explains better why it was removed. It was not done to cut anyone off from the site.
Staff member
HERE TO HELP YOU!
Cutting Edge
As you may have noticed we are doing a Fund Raiser for SatelliteGuys!
As many of you know I have been paying for a majority of the operation of the site out of my own pocket for awhile now. Now looking at things we have a number of renewals coming up that I could use some help with. These renewals include the license renewal for our Forum Software, Renewal of a number of our add on's the site uses, renewal of domain names etc.
I have set a goal of $400.00 - any extra that comes in will just go to fund the operations of the site. None of the money will go to me (I tried BuyMeACoffee a few months ago, and they denied me saying they do not do business with Satellite Piracy sites... which we are not... hell we host the beta programs for both DISH and DIRECTV here...)
Anyways... if you would like to help out please click the link below.
www.satelliteguys.us
Thank you in advance.
As many of you know I have been paying for a majority of the operation of the site out of my own pocket for awhile now. Now looking at things we have a number of renewals coming up that I could use some help with. These renewals include the license renewal for our Forum Software, Renewal of a number of our add on's the site uses, renewal of domain names etc.
I have set a goal of $400.00 - any extra that comes in will just go to fund the operations of the site. None of the money will go to me (I tried BuyMeACoffee a few months ago, and they denied me saying they do not do business with Satellite Piracy sites... which we are not... hell we host the beta programs for both DISH and DIRECTV here...)
Anyways... if you would like to help out please click the link below.
SatelliteGuys Maintenance Fund Raiser
www.satelliteguys.us
Thank you in advance.
18 Replies
·
558 views
I planned on removing it today, but then my fathers car broke down and I had to drive him all around to get his stuff done. Then I had a doctors appointment after that which was annoying...
Dr asks me if I have had any changes, so I tell him something wrong with me that started a month or so ago and his reply back is, that it sucks to get old... I hate that. Why ask me. if your going to come back with a smart ass answer.
Anyays I hope to get rid of Tapatalk tomorrow.
And we had more people donate today, thank you! The extra money is going to future expenses since things like add ons don't expire at the same time.
THANK YOU, THANK YOU, THANK YOU AGAIN!
Dr asks me if I have had any changes, so I tell him something wrong with me that started a month or so ago and his reply back is, that it sucks to get old... I hate that. Why ask me. if your going to come back with a smart ass answer.
Anyays I hope to get rid of Tapatalk tomorrow.
And we had more people donate today, thank you! The extra money is going to future expenses since things like add ons don't expire at the same time.
THANK YOU, THANK YOU, THANK YOU AGAIN!
Tapatalk has been removed.
I have added a new feature which is a work in progress called "Social Feed" which displays the forums Facebook style. Its nice for people who like that, but needs work. But i have been watching this one for awhile and the author is being really responsive to suggestions and adding them. So if you have any please let me know and I can pass them along.
I have added a new feature which is a work in progress called "Social Feed" which displays the forums Facebook style. Its nice for people who like that, but needs work. But i have been watching this one for awhile and the author is being really responsive to suggestions and adding them. So if you have any please let me know and I can pass them along.
Staff member
HERE TO HELP YOU!
111 Replies
·
2721 views
TFLEV
Time for another AWESOME video from TFL Electric Vehicles!
View: https://www.youtube.com/watch?v=c7CB6m89_RY
Direct YouTube Link - How the Heck Do You Tell the NEW 2027 Rivian R2 from the R1? I Compare Both Side-By-Side!
View: https://www.youtube.com/watch?v=c7CB6m89_RY
Direct YouTube Link - How the Heck Do You Tell the NEW 2027 Rivian R2 from the R1? I Compare Both Side-By-Side!
0 Replies
·
7 views
Supporting Founder
Lifetime Supporter
I have had good experiences with Brave but lately I am frustrated with it.
Now when I launch the app it shows a box at the bottom asking if I want to go back to the last opened page. It is in conveniently located and I would prefer to eliminate it.
Does anyone know how to do this?
Please let's not sidetrack the discussion into an exploration of why I don't care for it or a lecture about all the wonderful aspects of the feature. I just do not care for it.
Now when I launch the app it shows a box at the bottom asking if I want to go back to the last opened page. It is in conveniently located and I would prefer to eliminate it.
Does anyone know how to do this?
Please let's not sidetrack the discussion into an exploration of why I don't care for it or a lecture about all the wonderful aspects of the feature. I just do not care for it.
3 Replies
·
68 views
I don't have an Android phone so I don't know if this will apply to the Brave settings on your android device but it works on the desktop for me.
Change this setting to either startup to a different website or a new tab page. I have mine set to open to google.com instead of where I left off and it doesn't ask me at the next startup if I want to open the last opened page unless it crashed.
Change this setting to either startup to a different website or a new tab page. I have mine set to open to google.com instead of where I left off and it doesn't ask me at the next startup if I want to open the last opened page unless it crashed.
Supporting Founder
Since the Reds have there thread we should too!
Last watched Nine inch Nails
Next 3:10 to Yuma
Last watched Nine inch Nails
Next 3:10 to Yuma
5346 Replies
·
509288 views
