Social Feed
Lifetime Supporter
Hello everyone! I just wanted to post an update on the 8' mesh dish I bought from Tek2000 a while ago. Well, I've had it up and have been using it for a few weeks now and overall I'd have to say I'm happy with a few reservations. I'm using an 18" actuator to scan from 55.5W to 125W with a WSI NS741 C/KU LNB and an X2 Premium receiver. I can lock most everything I would like to get with the exception of a few S2 channels. For example, I have not been able to lock RTV on 87W but I am able to get the S2 channels on 3743V on 87W. Receiver did show signal several times but could not lock it. Also, not able to lock 3780H (S2 NBC) on 105W. Granted, I have not done any serious tweaking (just got it on the arc and working) and I do have a long run into the house (about 140 feet) so maybe that accounts for some channels not locking. I have not tried getting KU yet. As far as quality, I'd say it's OK. There are few places on the dish where the mesh is not flat on the frame so I guess I will need to put a rivet here and there. Also, there is some rust showing on the ring where the paint chipped off during setup that will need touched up. Don't see any on the dish itself as it appears to be all aluminum. My personal opinion is the mount could be improved but it does work. I have attached a few pics of the dish. If you would like any other pics let me know. Please feel free to comment or ask questions.
43 Replies
·
12882 views
B
OK, I finally got around to getting my pictures off the camera and resized. They cover from receiving the packages, and noted package damages, initial setup and the mostly finished project. The one thing I did change were the nuts on the declination adjustment. I was afraid that I might not have enough adjustment space with the full size nuts, so I replaced them with half nuts. So, assuming I am able to get them all uploaded, here they are:
Here are some measurements I took of the dish and mount. Being aluminum, the dish is really light but I still think the mount could be improved.
Thanks! The C band goes from 55.5W to 125W (KU from 30W to 125W). The ground slopes up gradually to the west of the dishes but the tree line is probably over 150' away so not a real problem at this point. I may need/want to trim them at the spot the dishes point to in the future (may even get further west satellites then).
I can't remember what thread but I saw where someone posted that their dish arrived well packed and undamaged. It seems they are improving with their shipping but you may want to check things out the best you can before the delivery man leaves and have them make note of any damage.
EDIT: Here is the post - Tek2000 10' Mesh Dish Install & Initial Review
Pub Member / Supporter
Cutting Edge
I created this thread on the original Edgecutter Cutting Edge Forums site. It's simply a place for those to review the latest software available for those using Windows 10 and Windows 11. To date it has received 112,559 views. I have been asked by staff to continue this thread here.
521 Replies
·
47184 views
To each there own but I've found that Windows can't do much more than Linux can. Can't have everything.
For niche use cases, yes I agree. Kali for ethical hacking and security testing, and running a Cacti server for network monitoring are the two things I have experience in. Plus thousands and thousands of other things, but for every day use I just can't see it. The owner of the GMRS repeater that I pay to access is changing the Tx DPL tones tomorrow, while Chirp is available on Linux, the software to program my MXT500 is not.To each there own but I've found that Windows can't do much more than Linux can. Can't have everything.
I run Fedora and Ubuntu in VMWare, honestly I don't care much for the UI of either of them and I don't feel like spending days/weeks to customize the UI to make it look Windows-like when I could just use Windows. The cartoonish dock at the bottom of the screen reminds me of Apple products.
As I said above, and, FWIW, I run Win11 Pro and Arch on separate 250 GB NVME drives, using F8 to select which I boot to, with a 1TB SSD for storage, accessible to both OSs and a third formatted Nvme I want to use to learn Kali. It was much faster to setup Arch than it was to strip down Windows. Windows still takes much longer to boot.
For some reason, the satelliteguys.us site is loading a lot slower than usual on both Chrome on my Asus laptop and Safari on my iPhone.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
I'm also seeing longer appearances of the blue bar at the top and the "3 blue bars" loading symbol.
Is anyone else also having the same problem? Thanks in advance.
527 Replies
·
17907 views
Remember folks... just like DNS... its always Foxbat. 
WTF… …What the Foxbat!Remember folks... just like DNS... its always Foxbat.
S
wow what a kick in the balls!!! the wife blames you when things don't work now scott's blaming youWTF… …What the Foxbat!
I know. Here's what Scott has in store for me if I get out of line:wow what a kick in the balls!!! the wife blames you when things don't work now scott's blaming you
Help, I'm a little confjused on the activation process.
I purchased the Joey 4 from Solid Signal and shipping box has Call 866 726-4282 to Avtivate new Receiver. That number is Solid Signals number.
I googled and that search said call Dish to activate. I assume that is correct unless this requires a 2 step process.
Please let me know.
Thanks
I purchased the Joey 4 from Solid Signal and shipping box has Call 866 726-4282 to Avtivate new Receiver. That number is Solid Signals number.
I googled and that search said call Dish to activate. I assume that is correct unless this requires a 2 step process.
Please let me know.
Thanks
6 Replies
·
192 views
All good called Dish and new Joey 4 is activated and working.
Old Joey 2 deactivated and no need to return.
Old Joey 2 deactivated and no need to return.
S
i bought mine straight from dish as it was only $ 100.00 bucks!!! had the protection plan they came out removed and deactivated the 4k joey and activated and installed the joey 4.All good called Dish and new Joey 4 is activated and working.
Old Joey 2 deactivated and no need to return.
Supporting Founder
Pub Member / Supporter
Lifetime Supporter
Apple has finally released their Apple TV 4K with built-in Siri and a microphone so it can respond to your queries even if you don't have the remote. It also increases in price, to $299. I had been planning on updating my current Apple TV 4K streamers, but that's $600 for the two of them, and that's a pass at this point.
At $299, it had better come with 256 GB of Storage, Gigabit (or better) Ethernet, the latest HDMI tech and standards, and one year of free Apple One. But it probably won't…
At $299, it had better come with 256 GB of Storage, Gigabit (or better) Ethernet, the latest HDMI tech and standards, and one year of free Apple One. But it probably won't…
Apple TV 4K
Apple TV 4K. New Siri AI and hands-free control. Stunning picture and immersive HomePod surround sound. Works with your Apple and smart home devices.
www.apple.com
14 Replies
·
174 views
S
. apple's been making money off of software and not hardware for a while
they all do that anyways.. ever notice your cell phone slows down when you come up for an upgrade..
. apple's been making money off of software and not hardware for a while
The new curated multiview is now live.
While on many of the sports channels and non sports channels there is a multi view option button. It will pull up a side bar with many different multi view options.
While on many of the sports channels and non sports channels there is a multi view option button. It will pull up a side bar with many different multi view options.
3 Replies
·
158 views
Supporting Founder
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
141 Replies
·
1348 views
Supporting Founder
Lifetime Supporter
This thread is a place to discuss the 4K events that appear on channel 540. We are getting, at this point, one college football game a week. Let's hope there is more coming.
1931 Replies
·
298854 views
Hmmm, I'm not seeing anything like those events in our Hopper 3 guide for tonight or Saturday.
I went into the Tools menu and requested a Guide Update. I'll try looking at it after the update completes.
edit — I now have the 148-01 4KFox events for Saturday, but not anything for 148-02 or 148-03 which don't even show as available channels. I do have 148-04 4KUSA.
As I recall you have the Flex package. Do you sub to multisport? -02 is FS1 and -03 is ESPN. -01 is Fox so you would get that if you sub to locals.Hmmm, I'm not seeing anything like those events in our Hopper 3 guide for tonight or Saturday.
I went into the Tools menu and requested a Guide Update. I'll try looking at it after the update completes.
edit — I now have the 148-01 4KFox events for Saturday, but not anything for 148-02 or 148-03 which don't even show as available channels. I do have 148-04 4KUSA.
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/watch?v=87N42NxLPC0
Direct YouTube Link - 8 U.S. States Sue OpenAI Over Safety Concerns With Younger Users
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/watch?v=87N42NxLPC0
Direct YouTube Link - 8 U.S. States Sue OpenAI Over Safety Concerns With Younger Users
TWIT's Website
TWIT Live Feed
0 Replies
·
12 views
Pub Member / Supporter
On Tuesday, I recorded the first episodes of the new season's NCIS shows on CBS (Dish provided, not OTA). The new New York series and Origins will both do Auto Skip, but the original, now season 24 does not. What's stranger, when I do a search for NCIS, Origins and New York show the current recording and the next episode it will record, but the original show only shows the current recording and some other channel showing the very first episode of season one. It makes no sense. When I set up the timers, I was able to use search for Origins and New York, but for the original, I had to scroll ahead in the guide until last Tuesday when the show was airing. Then set the timer from there. You can see its timer type is DVR where the other two are Seek. What am I missing?
Thanks!
Thanks!
20 Replies
·
392 views
