Social Feed
Title says it all. I have a Hopper Duo with DVR in the living room. I have two 40.0 remotes. Both remotes can control the Hopper from across the room (25 feet?) as long as they have line-of-sight to the Hopper, but as soon as the line-of-sight is interrupted (by my hand, for example), neither one works. This tells me that the remotes are controlling the Hopper via IR. Changing MENU / SETTINGS /REMOTE / IR ON/OFF doesn't change this.
I need to control the Hopper via the UHF link, but I can't make it work. All of the on-line references tell me to "move the UHF antenna" or "extend the UHF antenna" or "use a length of cable to put the UHF antenna in a better spot". But since the Hopper doesn't have a connector for a UHF antenna, this is impossible.
Suggestions?
I called Dish Support, but since the guy who answered didn't speak English, and I don't speak Hindi, I 'm not expecting much there. If it would help, I can take a picture of the rear panel of the Hopper, if I can figure out how to attach a picture.
Bill
I need to control the Hopper via the UHF link, but I can't make it work. All of the on-line references tell me to "move the UHF antenna" or "extend the UHF antenna" or "use a length of cable to put the UHF antenna in a better spot". But since the Hopper doesn't have a connector for a UHF antenna, this is impossible.
Suggestions?
I called Dish Support, but since the guy who answered didn't speak English, and I don't speak Hindi, I 'm not expecting much there. If it would help, I can take a picture of the rear panel of the Hopper, if I can figure out how to attach a picture.
Bill
27 Replies
·
5322 views
iJustine
Time for another AWESOME video from iJustine!
View: https://www.youtube.com/shorts/YJjxjYvmQ8s
Direct YouTube Link - Good Bye, Tim! Last WWDC
The official iJustine Website's Website
Buy her book!
View: https://www.youtube.com/shorts/YJjxjYvmQ8s
Direct YouTube Link - Good Bye, Tim! Last WWDC
The official iJustine Website's Website
Buy her book!
0 Replies
·
6 views
Pub Member / Supporter
Cutting Edge
WANTED DirecTV LCC
Anyone have a DirecTV Local Channel Connector that you'd like to get rid of at a reasonable price? DirecTV is currently in a contract dispute with owner of my local ABC affiliate.
12 Replies
·
293 views
I did that. The response was that the LCC is not available. Escalated the issue to a tech support person with the same results.
Could be out of them I guess ... I'd keep trying, every 3-4 days.I did that. The response was that the LCC is not available. Escalated the issue to a tech support person with the same results.
If they are not out of them as them WHY you can't get one, seeing Your in a Dispute. Thats what they are for.
I would make them give you a real answer, don't let them off the hook.
I had one, and it worked well, but I believe I gave it to another D* friend (also had a AM21), I know I gave them away ...
According to the tech support guy, they don't have any in stock. He said I should receive an email when and if they have them. I even told him I would accept a refurbished unit.
I'm not sure your going to find any Refurbished ones as D* doesn't ask for them back.According to the tech support guy, they don't have any in stock. He said I should receive an email when and if they have them. I even told him I would accept a refurbished unit.
Pub Member / Supporter
Lifetime Supporter
Did anyone have a price increase today on their equipment? I own my VIP211k's, and they have been $5.00. My bill that I received last week shows the "add-ons" as being $5.00. However, I just logged into my Dish account, and my "add-ons" are now $10.00. Did the additional receivers go up by $5.00 recently?
As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.
As I mentioned, my last bill shows $5.00 and under the notes, nothing is mentioned about a price increase.
11 Replies
·
192 views
Hello everyone, new guy here. I'm trying to solve problem I'm having with Dish bonus view channels. When I'm watching the bonus view channels then I switch back to regular dish channels, after few minutes the screen flips to black and after 30 seconds flips back to regular channels and continues to flip back and forth until I turn off TV. After I wait 30 minutes and turn back on , I can use regular channels again. So, its after I switch from bonus view channels to regular dish channels the problem starts. Been trying to fix this for a month, but no luck
Here what I've done.
i contacted Dish support and they sent me a new Joey3, but no help. Switched to a different HDMI input on TV, no help. Used different HDMI cable , no help. Used different electrical wall plug, no help.
Finally got a Dish tech to check it. He ran all systems check and was OK. Finally he brought in a small TV and plugged in the HDMI out from the Joey to the small TV. He could not get the problem to occur on his small TV, so the new Joey was working OK. So, then the problem must be myTV. He made some phone calls and came back with the answer that there must be a problem with the analog to digital switch in my TV. Has anyone ever heard of a problem like this, or is it time to be looking for a new TV? My tv LG OLED65C8PUA. TV has been trouble free til now. Thanks
Here what I've done.
i contacted Dish support and they sent me a new Joey3, but no help. Switched to a different HDMI input on TV, no help. Used different HDMI cable , no help. Used different electrical wall plug, no help.
Finally got a Dish tech to check it. He ran all systems check and was OK. Finally he brought in a small TV and plugged in the HDMI out from the Joey to the small TV. He could not get the problem to occur on his small TV, so the new Joey was working OK. So, then the problem must be myTV. He made some phone calls and came back with the answer that there must be a problem with the analog to digital switch in my TV. Has anyone ever heard of a problem like this, or is it time to be looking for a new TV? My tv LG OLED65C8PUA. TV has been trouble free til now. Thanks
6 Replies
·
96 views
Staff member
HERE TO HELP YOU!
Cutting Edge
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
So let the game continue!
The last song was added by Bobby who posted...
One Meat Ball - Andrews Sisters
CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!
Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game
Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.
Example:
Long Live Rock and Roll -- Rainbow
Rainbow in the Dark -- Dio
Another example:
Ride the Lightning -- Metallica
Lightning Strikes -- Ozzy Osbourne
Get it?
An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
67109 Replies
·
2662359 views
Staff member
HERE TO HELP YOU!
House of the Dragon, the prequel to Game of Thrones, premieres on HBO Max on 8/21. I will be warching
www.syfy.com
View: https://youtu.be/fNwwt25mheo
S~
'Game of Thrones' spinoff 'House of the Dragon' fires up release date at HBO, drops new character pics
The wait’s felt a little like watching for a dragon egg to hatch, but HBO’s hugely anticipated Game of Thrones prequel series finally has a release date. House of the Dragon will debut the first of its initial 10-episode season this summer, the network revealed today in a series of tweets that...
View: https://youtu.be/fNwwt25mheo
S~
39 Replies
·
5644 views
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/watch?v=unH0Z1jl228
Direct YouTube Link - Why New FCC Rules Could Crush Phone Privacy in the US
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/watch?v=unH0Z1jl228
Direct YouTube Link - Why New FCC Rules Could Crush Phone Privacy in the US
TWIT's Website
TWIT Live Feed
0 Replies
·
7 views
Hi all, I recently inherited a FTA system off Craiglist and have been trying to get it set up. What I got was a Glorystar-branded ~90cm offset dish with a ground mount (/flat roof) frame, and GEOSATpro DSR200c receiver. From that initial equipment, I've replaced the old LNBF with a (cheap!) new one and also splurged on an SG-2100 H-H motorized rotor which does respond from the receiver's USALS menu.
The previous owner had it set up for religious programming on Galaxy 19 and I've been trying to start by finding that same bird at least. After a couple sessions I'm not sure I have, but I've found *something* at least! A handful of motor ticks further than the dish wants to be for 97W after starting from motor 0 pointing as much south as I can guess at. (I don't have great references to aim for and it's really hard to sight where exactly the dish is pointing anyway….)
Anyway, so far there's only one transponder that I've ever been able to catch as I search. It's 12146 V and when the receiver scans it I get this list of video channels:
but it's a long-winded spiel about "you know us as an industry-leading satellite solutions provider with over a quarter million sites" and to call them For All Your Every Needs™ type thing.
While I get little blips from other frequencies, this is the only strong transponder I've been able to come across. My receiver shows it as S 75 and Q up to 85 when I adjust it. It actually seemed to get better as I **un**skewed my LBNF — iiuc G19 was supposed to be -20º for me but however I'm supposed to be reading/referencing the angles the puck is now basically at 0º relative to the dish/arm got the strongest on this transponder.
Anyway sorry this is so long winded already… my question is, do I even have the right satellite? None of the other transponders that are supposed to be active on G-19 seem to come in. And if not the right satellite does anyone happen to recognize which one I might have found instead? I think knowing that would help me then adjust for a truer south aim and then hopeful the USALS will work automatically once I can get it dialed in.
The previous owner had it set up for religious programming on Galaxy 19 and I've been trying to start by finding that same bird at least. After a couple sessions I'm not sure I have, but I've found *something* at least! A handful of motor ticks further than the dish wants to be for 97W after starting from motor 0 pointing as much south as I can guess at. (I don't have great references to aim for and it's really hard to sight where exactly the dish is pointing anyway….)
Anyway, so far there's only one transponder that I've ever been able to catch as I search. It's 12146 V and when the receiver scans it I get this list of video channels:
- 1.1 Srv_1
- 2.84 OU_Chan
- 3.2 Srv_2
- 4.5 Srv_5
- 5.3 Srv_3
- 6.4 Srv_4
- 7.6 Srv_6
- 8.7 Srv_7
but it's a long-winded spiel about "you know us as an industry-leading satellite solutions provider with over a quarter million sites" and to call them For All Your Every Needs™ type thing.While I get little blips from other frequencies, this is the only strong transponder I've been able to come across. My receiver shows it as S 75 and Q up to 85 when I adjust it. It actually seemed to get better as I **un**skewed my LBNF — iiuc G19 was supposed to be -20º for me but however I'm supposed to be reading/referencing the angles the puck is now basically at 0º relative to the dish/arm got the strongest on this transponder.
Anyway sorry this is so long winded already… my question is, do I even have the right satellite? None of the other transponders that are supposed to be active on G-19 seem to come in. And if not the right satellite does anyone happen to recognize which one I might have found instead? I think knowing that would help me then adjust for a truer south aim and then hopeful the USALS will work automatically once I can get it dialed in.
9 Replies
·
267 views
Done and done and done! I ended up doing a bit more iteration (back and forth between the left-right and up-down adjustments) but I've now got it landing on G19 at its default position for 97W.
Yep, ended up with a page or two full on my receiver's search. Didn't double-check that my receiver has all six of the right transponders but I can mess with that later if it turns out I'm missing something interesting but still DVB-S / MPEG-2 compatible.
Yep, can see definite signal degradation as soon as I skew the LNB either way from "straight" (seam on the LNB lined up with the clamps on the mounting bracket). Will make setup easier if I want to try swapping anything else in!
I don't know if there's any good (unencrypted, DVB-S) satellite farther away to really check the sweep against, but I was at least able to program in my original find at 101.0 W back in (now at the correct "12000 V 20000" setting) and can get both birds automatically.
Shouldn't be *that* exciting since it's just an ad, but still really fun to choose channels on the other one and have it jog over and lock on
B
beside 123W, another one to try (if it's above the horizon at your location) is Hispasat @30W. It has at least 2 DVB-S transponders with SD/Mpeg2 channelsDone and done and done! I ended up doing a bit more iteration (back and forth between the left-right and up-down adjustments) but I've now got it landing on G19 at its default position for 97W.
Yep, ended up with a page or two full on my receiver's search. Didn't double-check that my receiver has all six of the right transponders but I can mess with that later if it turns out I'm missing something interesting but still DVB-S / MPEG-2 compatible.
Yep, can see definite signal degradation as soon as I skew the LNB either way from "straight" (seam on the LNB lined up with the clamps on the mounting bracket). Will make setup easier if I want to try swapping anything else in!
I don't know if there's any good (unencrypted, DVB-S) satellite farther away to really check the sweep against, but I was at least able to program in my original find at 101.0 W back in (now at the correct "12000 V 20000" setting) and can get both birds automatically.
Shouldn't be *that* exciting since it's just an ad, but still really fun to choose channels on the other one and have it jog over and lock on
No luck finding this one. I motor over and it seems like a pretty dead spot of sky. I did get a slight blip (Q up to 1% or 2%) if I lowered the dish slightly. So I wonder if my polar mount itself maybe needs a bit of fine tuning?
Even when loosening the bolts and manually nudging the dish up/down/left/right nothing seemed to really wake it [new receiver, see below!] up and never saw anything more than 4% or 5% which I don't know is even real or could have been just noise?
I'm in Washington state (northwest CONUS) so this one's not an option for me.
I now have a V8 Finder 2
I've been able to scan in more now on G-19, and as well as watching the ad on SES 1 and getting some PBS stations there and G-16 both. So three satellites kinda in the general vicinity of each other (97W/101W/99.1W) programmed and able to rotate between.
Is G-18 at 123W as strong as the others? According to Satbeams I should be at least somewhat in its footprint although it looks like it's maybe focused more on Alaska.
Now that I'm back at my computer waiting for the Finder to charge back up looks like the Eutelsat(s) 117W have a couple Ku transponders I could look for too.
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/watch?v=wW3qReY-JYA
Direct YouTube Link - Google's New Translate Tool
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/watch?v=wW3qReY-JYA
Direct YouTube Link - Google's New Translate Tool
TWIT's Website
TWIT Live Feed
0 Replies
·
11 views
TWiT Tech Podcast Network
Time for another AWESOME video from the TWIT Network!
View: https://www.youtube.com/watch?v=-zh1RgcJue0
Direct YouTube Link - Another Cisco SD-WAN 0-day?
TWIT's Website
TWIT Live Feed
View: https://www.youtube.com/watch?v=-zh1RgcJue0
Direct YouTube Link - Another Cisco SD-WAN 0-day?
TWIT's Website
TWIT Live Feed
0 Replies
·
9 views