Social Feed

GLBorchert
Last reply · posted in DIRECTV General Forum
I've had both D* and E* (it's a long story) but have decided to drop E* and convert completely to D*. Since I need to add three HD receivers it didn't make much sense to buy H10's and then have to tear everything out in a couple of months. So I bought H20's at my local Circuit City. (H20's are in-stock and available at local CC's and BB's even though I live in Dallas and we don't yet have MPEG4 capability.) I was surprised to read in the H20 manual that "To view HD programming you'll need a 5 LNB Multi-Satellite dish antenna—MPEG4 and Ka/Ku compatible."

I presume this is not the case as I have read on this forum that folks in other non-upgraded areas are using H20's with 3LNB Oval Dishes. At least I think I've read that, right??

Please advise if you know the answer to this question as I just spent 20 minutes on hold with two different D* CSR's who didn't have clue one.
18 Replies · 6406 views
C
tx_dude said:
Help me out crappieguy. I have a H10 and all of my HD channels on sat 110 pixelate terribly making it unwatchable. The HD channels on 101 and 119 are fine...not to mention my OTA HD channels are perfect. My signal strength on 110 is 91, 93, 95.

Is the LNB bad? The receiver? What is it? DTV says it is a nationwide problem but no one here is complaining about it.

I am a new DTV customer of 3 months and came over for Sunday ticket from Dish network. I may be going back.
Tell me a little more about your system, how many receivers on system? Any external switches? What about your cabling is it rg6 and the connectors, have you taken them apart and looked inside to make sure there is no corrosion? Also I have had home wiring issues cause that problem. With this receiver having a 3prong plug sometimes the ground inside a home carried excessive residual voltage and these rec are VERY susceptible to stray power. Or i have had so-called electricians cross the neutral and ground since they look like they are the same in the box put them together and that causes problems too. Hmmmm is any of your cabling buried? If so has there been any tilling or anything. There are so many possibilities they are endless without looking at the system. But I will try to help just keep me posted with info.
T
This is a brand new house. I went up in the attic and traced the coax out and there is no damage anywhere. I even pulled a coax from another room into my living room just to make sure, same problem. Nothing is buried or damaged. I called Directtv again and they overnighted me a H20 for free as long as I payed $15 shipping. I figured not bad for the new system. Well...I got it today and the problem is still there. Only on the HD channels on 110. One thing I did notice is the signal strength with the H20 is lower than the H10. I don't understand that.

Anyway, I climbed onto the roof and switched the location of the coax on the multiswitch. I did notice that the LNB had quite a few scrapes (probably from bouncing around in the installers truck). I then went inside and watched the signal strength on 110 transponders. I did notice that the signal would go from 77 to 0 and then back again occasionally. I am chalking it up to a bad lnb, multiswitch. I ordered a new one on EBAY today.

Also, I got an extension cord and plugged the receiver into another outlet to check the grounding issue. That didn't help.

Hopefully replacing the LNB will fix this. Why do you think the H10 shows my signal strength in the 90s and the H20 in the 70s? My PVR in the bedroom shows it in the high 80s and low 90s.
hdtvtechno
tx_dude said:
This is a brand new house. I went up in the attic and traced the coax out and there is no damage anywhere. I even pulled a coax from another room into my living room just to make sure, same problem. Nothing is buried or damaged. I called Directtv again and they overnighted me a H20 for free as long as I payed $15 shipping. I figured not bad for the new system. Well...I got it today and the problem is still there. Only on the HD channels on 110. One thing I did notice is the signal strength with the H20 is lower than the H10. I don't understand that.

Anyway, I climbed onto the roof and switched the location of the coax on the multiswitch. I did notice that the LNB had quite a few scrapes (probably from bouncing around in the installers truck). I then went inside and watched the signal strength on 110 transponders. I did notice that the signal would go from 77 to 0 and then back again occasionally. I am chalking it up to a bad lnb, multiswitch. I ordered a new one on EBAY today.

Also, I got an extension cord and plugged the receiver into another outlet to check the grounding issue. That didn't help.

Hopefully replacing the LNB will fix this. Why do you think the H10 shows my signal strength in the 90s and the H20 in the 70s? My PVR in the bedroom shows it in the high 80s and low 90s.

Yes it sounds as a bad LNB, Do you have the Directv Protection Plan ?
If you would of have it, directv would of fixed it for free :)

Yes there are signal differances between the H10 & H20
T
No protection plan. I will post with the results of the new LNB to let everyone know. I figured it would cost me more than $43 dollars to have them send me one or someone else do it. I got the whole dish for that price.
S
Dealing withe CSRs can be a bit frustrating, I've found after dealing with these clowns since '94. Your best bet is hanging up and calling right back, and dealing with a "qualaified" rep who knows what the hell they're doing.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Can't help but wonder if a worker overlooked checking the harness. I rarely ride a roller coaster anymore but when I do I check the harness myself pretty aggressively.
Can't imagine what the son is going through.

25 Replies · 363 views
Jimbo
dishstaller
Had no idea there were that many redundancies built into those restraints.
Jimbo
Had no idea there were that many redundancies built into those restraints.
It makes sense, however, I would want more types of restraints, so if one doesn't work, the other does ... the restraints coming over the shoulder I would have expected ... with a Seat belt as last resort.

Fwiw, I inquired with what they use on Coasters at Cedar Point, various Coasters, different restraints according to what the car and track requires ...

NONE of the Coasters at CP use THAT particular system :)
I'm glad to see ...
dishstaller
with a Seat belt as last resort.
According to the article, when you see a seat belt on a ride like this, it is basically used as a way of making sure the rider isn't too large/fat to safely ride the ride.
Jimbo
According to the article, when you see a seat belt on a ride like this, it is basically used as a way of making sure the rider isn't too large/fat to safely ride the ride.
Well, the over the shoulder support is better, but would require reconfiguring the cars.
Jimbo
Heres an article from the Akron Beacon ... seeing Six Flags has bought Cedar Point and Kings Island, they are included ...
I said earlier that Cedar Point doesn't use this type of seat restraint ... well, it does use it, But the difference is, the ones up here ALSO have the Over the shoulder restraint as well ... like I was suggesting that they should have used with the Goliath.

One of the new(er) one at Cedar point the Gate Keeper, uses the Clam shell .. I have rode it many times and have Mostly felt secure, that ride will stop you part way on the ride and you just hang, till the ride is ready to continue ... I typically ride the Front Car ... when its getting ready, you ARE hanging, in the car, looking down .... it would require 2 separate restraint systems to unlock at the same time to possibly get out of it.

dishstaller
UPDATE: Six Flags is adding seatbelts to all 9 rollercoasters

dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
Didn't see a thread like this so I figured why not start one. This is about natural supplements. If you aren't into supplements, fine, but please let those of us who do want to discuss this discuss it.

The first one I wanted to mention has been a real life changer. I'm 62 and still do all of my own install work at my business....also do all the yard work at the house. A few years ago I started noticing that I was losing my range of movement, it was even getting hard to bend over and lace up my boots. Almost got stuck in an attic because I couldn't get turned around once the work was done. Didn't think much of it and figured with age comes stiffness that was only going to get worse as time went on.
It was then that I stumbled across a video which was discussing rotator cuff tears and why they were to prevalent these days. Turns out, the culprit is a simple deficiency in MANGANESE which is key in keeping your tendons flexible. Most anti-biotics strip your body of any manganese it might have had which is why certain anti-biotics, especially those in the Cipro family. I actually knew a man who had two tendons tear while on that stuff.
Went to Amazon and ordered some manganese. Now it took a while, it wasn't instant, but gradually I have regained all of my flexibility. I can bend over and touch my toes while standing with no pain and putting on my boots is no longer a chore.
Pretty cheap too. The bottle I ordered was a 200 ct for under $13. They said to take double the normal dose for the first month because most people are severely lacking, then go to one a day.
1 Replies · 32 views
  • Like
Reactions: reubenray
dishstaller
Not sure if this would qualify as a supplement but here goes: When I meet someone who is in their 90s and doing very well healthwise I always ask what they attribute their longevity to. Out of all the people I questioned, there was only ONE thing that they ALL did. They all drank some apple cider vinegar daily....usually before bed. You can water it down all you want. Who knows why, but I do it. You want to buy the organic type with the mother.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
I've always been super interested in things space related so this is a pretty cool event coming up. Nov 18, 2026 early in the morning, Voyager 1 will reach the distance of one full light day from Earth. Took almost 50 yrs. I was 13 when it launched.


View: https://www.youtube.com/shorts/gjHK3clOwIw?feature=share
5 Replies · 118 views
Foxbat
So, 1/1596th the way to Alpha Centauri (if it were headed that way). 79,800 years to go…
Bruce
So, 1/1596th the way to Alpha Centauri (if it were headed that way). 79,800 years to go…
IMG_2175.webp
  • Haha
  • Like
Reactions: Foxbat and navychop
b4pjoe
So, 1/1596th the way to Alpha Centauri (if it were headed that way). 79,800 years to go…
Thanks for that info. I will mark it on my calendar! 🤣
Jimbo
Will the Jupiter 2 make it in time ....
Stay tuned ...
dishstaller
So, 1/1596th the way to Alpha Centauri (if it were headed that way). 79,800 years to go…
Isn't that insane!!!
To reach the nearest galaxy to ours, at its present speed, will take another 44 billion years.
dishstaller
Pub Member / Supporter Lifetime Supporter
Last reply · posted in The Chit Chat Club
I'm surprised Walmart hasn't banned this guy from all of their stores. He has been on their CASE the past few months.


View: https://www.youtube.com/shorts/f3zr37ekgKM?feature=share
71 Replies · 681 views
  • Wow
Reactions: NYDutch
Juan
Then they are stupid. Everyone knows that the price per ounce should be the price per ounce of actual product.
You are paying for the whole thing
T
You are paying for the whole thing
Well, the bag can't weigh that much, right? But by law food product packaging must display the actual net weight of the product, i.e., the contents of the container, so by any logic, if not law, a store's stated per-ounce cost should reflect that figure. But since there's not any law regulating shelf statements, a store can say whatever it wants without violating any rules. So I guess the answer is more consumer legislation. Or simply caveat emptor.
  • Like
Reactions: (((Garyd)))
Juan
Well, the bag can't weigh that much, right? But by law food product packaging must display the actual net weight of the product, i.e., the contents of the container, so by any logic, if not law, a store's stated per-ounce cost should reflect that figure. But since there's not any law regulating shelf statements, a store can say whatever it wants without violating any rules. So I guess the answer is more consumer legislation. Or simply caveat emptor.
But a box can weigh more than an ounce..maybe 2...a can might weigh 5 ounces..a bag...not much
dishstaller
.a bag...not much
Well, according to the price per ounce on that first bag of coffee he mentions, that would mean the bag weighed over 6 ounces. That bag does NOT weigh 6 ounces. According to Google, an empty bag weighs half an ounce.
Jimbo
Well, the bag can't weigh that much, right? But by law food product packaging must display the actual net weight of the product, i.e., the contents of the container, so by any logic, if not law, a store's stated per-ounce cost should reflect that figure. But since there's not any law regulating shelf statements, a store can say whatever it wants without violating any rules. So I guess the answer is more consumer legislation. Or simply caveat emptor.
I would think that the Vendor/Maker of the product would have a say in it, showing the Correct weight ...
You would think it would be in the contract.

I do look at the ounces of items, but unless its way off, I don't check the math, may have to start now.

Remember when you use to get a 13.5 oz bag of Chips .... Thats a PARTY Size now.
  • Like
Reactions: AZ.
TRG
TRG
I would think that the Vendor/Maker of the product would have a say in it, showing the Correct weight ...
You would think it would be in the contract.

I do look at the ounces of items, but unless its way off, I don't check the math, may have to start now.

Remember when you use to get a 13.5 oz bag of Chips .... Thats a PARTY Size now.
I remember when a pound of coffee was 16oz. Now its 12oz, they don't call it a pound anymore and its three times the cost of the 16oz pound.
Jimbo
I remember when a pound of coffee was 16oz. Now its 12oz, they don't call it a pound anymore and its three times the cost of the 16oz pound.
Well, they don't call it a pound anymore ....

Ice cream is that way too, use to be a half gallon, now its 1.5 quart or some say 48 oz
  • Sad
Reactions: Bobby
Juan
Well, according to the price per ounce on that first bag of coffee he mentions, that would mean the bag weighed over 6 ounces. That bag does NOT weigh 6 ounces. According to Google, an empty bag weighs half an ounce.
You need to weigh the actual bag...a deli bag weighs less than that but a thick coffee bag is gonna weigh around an ounce...an empty tin can has some weight
NYDutch
You need to weigh the actual bag...a deli bag weighs less than that but a thick coffee bag is gonna weigh around an ounce...an empty tin can has some weight
Products sold by the ounce, pound, etc, should always be priced for the product only. Only the shipping weight should include the packaging.
harshness
Products sold by the ounce, pound, etc, should always be priced for the product only.
Unless the specific product or its packaging is known at the time of weighing, estimating the tare weight for a PoS system is a tall order.

I'm pretty sure that produce bags can't get any thinner. ;)

You certainly don't want to put unbagged produce on a belt, scale, or in a clerk's hands (gloved or not).
Jimbo
Unless the specific product or its packaging is known at the time of weighing, estimating the tare weight for a PoS system is a tall order.

I'm pretty sure that produce bags can't get any thinner. ;)

You certainly don't want to put unbagged produce on a belt, scale, or in a clerk's hands (gloved or not).
I would think that all the packaging would already be accounted for ... they weigh the container, subtract that from the scale, then add the product , so its weighing the Product only
meStevo
The larger discrepancies are likely from a data or sync issue. Digital tags don't cause the error, but they can spread one bad entry across a whole store or region instantly. The small cent differences are probably just rounding in the weight, the price data, or both.
  • Like
Reactions: Juan
(((Garyd)))
Well, they don't call it a pound anymore ....

Ice cream is that way too, use to be a half gallon, now its 1.5 quart or some say 48 oz
Is it real Ice-cream?
Jimbo
Is it real Ice-cream?
Is it Real Ice cream ???
Depends on what your talking about.
(((Garyd)))
Is it Real Ice cream ???
Depends on what your talking about.
Most don't have any milk in them
Jimbo
Most don't have any milk in them
REAL Ice Cream Does have Milk ... many of them are just Frozen desserts, pretending to be Ice Cream.
T
I would think that all the packaging would already be accounted for ... they weigh the container, subtract that from the scale, then add the product , so its weighing the Product only
I believe that per federal law the "net weight" of the given commodity, without regard to its packaging or the particular weight of that, must be clearly stated by the producer on the packaging. As in "Net wt. 2 lbs., 7 oz." So now the stores themselves commonly state a $ "per oz." or "per count" figure at the shelf whereas they never used to, supposedly to help people to comparison shop and/or to demonstrate that they are offering good prices. I would make the first assumption that they are simply taking the product label net weight and translating from that, as that would seem both the most logical as well as the easiest. If they're otherwise plopping the product onto a scale to arrive at a stated unit cost, then obviously that adds time & effort.

The ultimate question would be, if they are doing that, what really would it gain them? They'd get to show a very slightly lower unit price, but then presumably the competition between brands would still be even. I don't see how it can really much matter, but on principle there should be rules in this regard.
T
REAL Ice Cream Does have Milk ... many of them are just Frozen desserts, pretending to be Ice Cream.
For years the soft-serve places had to post signage stating that "We serve ice milk".
Juan
I believe that per federal law the "net weight" of the given commodity, without regard to its packaging or the particular weight of that, must be clearly stated by the producer on the packaging. As in "Net wt. 2 lbs., 7 oz." So now the stores themselves commonly state a $ "per oz." or "per count" figure at the shelf whereas they never used to, supposedly to help people to comparison shop and/or to demonstrate that they are offering good prices. I would make the first assumption that they are simply taking the product label net weight and translating from that, as that would seem both the most logical as well as the easiest. If they're otherwise plopping the product onto a scale to arrive at a stated unit cost, then obviously that adds time & effort.

The ultimate question would be, if they are doing that, what really would it gain them? They'd get to show a very slightly lower unit price, but then presumably the competition between brands would still be even. I don't see how it can really much matter, but on principle there should be rules in this regard.
It's probably just a programming error in the price labeling computer
TRG
TRG
I buy my coffee beans from a local small batch roaster. The scale they use has a large stainless steel bowl on top. They scoop the beans from large mylar bags containing the roast of your choice. After weighing the coffee the beans are poured into a bag or ground, your choice. I have a grinder and prefer grinding right before I brew.
  • Like
Reactions: Jimbo
NYDutch
Most don't have any milk in them
Ice cream must meet the follow standards:

Contain at least 10% milkfat (from real dairy/cream).
Weigh at least 4.5 pounds per gallon.
Contain at least 1.6 pounds of total solids per gallon and at least 20% total milk solids.
Contain no more than 100% overrun (the amount of air whipped into the mixture).

Products that don't meet those standards must still contain some milkfat and milk solids to be labeled a "frozen dairy treat".
  • Like
Reactions: Bobby
dishstaller
The larger discrepancies are likely from a data or sync issue. Digital tags don't cause the error, but they can spread one bad entry across a whole store or region instantly. The small cent differences are probably just rounding in the weight, the price data, or both.
It's simple math. You take the price and divide by the number of ounces and come up with the price per ounce. I find it hard to believe that Walmart's computers can't carry out simple division.
T
Last reply · posted in Free To Air (FTA) Discussion
IS Amiko MIRA 3 any good ???
Can you recommend the best to cover all bases. NO BEEPS on certain channels 101w (NEWSMAX ,NEWS NATION), a clock that keeps working STEADY for timed recording ,solid unit with good lifespan. My Amiko died AND my Linkbox has NO Favorites Button and BEEPS on many channels. Picking up 105 west with a NEW SHED IN THE Way with 6 foot Cband ..95 percent quality ...unbelievable.
2 Replies · 54 views
primestar31
IS Amiko MIRA 3 any good ???
Can you recommend the best to cover all bases. NO BEEPS on certain channels 101w (NEWSMAX ,NEWS NATION), a clock that keeps working STEADY for timed recording ,solid unit with good lifespan. My Amiko died AND my Linkbox has NO Favorites Button and BEEPS on many channels. Picking up 105 west with a NEW SHED IN THE Way with 6 foot Cband ..95 percent quality ...unbelievable.
Have you tried a new power brick on your Amiko? It's slim pickings out there anymore. The FTA market in the US has pretty much been abandoned.

This would likely be your best bet, and Rick is a good seller. I've never had any issues with him:

T
Have you tried a new power brick on your Amiko? It's slim pickings out there anymore. The FTA market in the US has pretty much been abandoned.

This would likely be your best bet, and Rick is a good seller. I've never had any issues with him:

Thanks
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 4 views
osu1991
Pub Member / Supporter
Last reply · posted in The Chit Chat Club

The number-one US state for EV growth, according to the June 22 Yardi report?
Oklahoma.


:eek


It has no ZEV mandates and "minimal" incentives, Yardi says, but also has cheap electricity, high multi-car household rates (so, for example, a non-Lightning Ford F-150 pulls their trailers), and a consumer base willing to switch.
114 Replies · 1006 views
harshness
The EV company to watch out for is SAIC. They seem likely to take over Government Motors at some point.

GM originally struck a JV deal with SAIC to gain access to China. Now SAIC has taken China back with the substantial library of technology GM shared and they're looking to export to Mexico, South America, the Middle East, and Asia-Pacific.
osu1991
  • Like
Reactions: Foxbat and AZ.
harshness
If it weren't for the sky-high electricity prices...

Of course, the real scare with Winter coming is the insane cost of heating oil.
  • Sad
Reactions: Jimbo
osu1991

GM said its next-generation vehicle architecture will provide 40 times more computing power and 30 percent less wiring than before and will expand from the 2028 Cadillac Escalade IQ to its high-volume SUVs, trucks, crossovers, and fourth-generation EVs, which will be powered by lithium manganese-rich (LMR) prismatic batteries

Despite the politicization and perceived consumer pivot away from EVs in America, GM needs to remain globally competitive, so it's doubling down on its fourth generation EVs, with energy-dense, cheaper-to-manufacture LMR batteries, more efficient motors, and state-of-the-art centralized computing architecture. With a stated goal of cutting the traditional four- to five-year concept-to-production time in half, GM is clearly challenging the concept of "China speed," which in the Chinese automotive industry can be as quick as 18 months from design to start of production. In the AI space, GM is smartly collapsing all of its marque-specific apps under the familiar OnStar brand, while providing more features—both on the phone and in the car—than it ever has before.
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68595 Replies · 2677225 views
  • Like
Reactions: c-spand
Bobby
Stay In Time - Off Broadway USA
harshness
Just In Time - Tony Bennett
gms49ers
Just Get Through This Night - Styx
  • Like
Reactions: long_time_Dish
long_time_Dish
Help Me Make It Through The Night - Sammi Smith
  • Like
Reactions: dishstaller
gms49ers
Make Me Smile/Now More Than Ever - Chicago
KAB
KAB
Pub Member / Supporter Lifetime Supporter
Last reply · posted in TV Shows
Just finished S2. Watching Gary Oldman as deshvilved, dejected MI-6 agent, Jackson Lamb, is one of the best things streaming right now. Already 2 more seasons in the works. HIGHLY recommended. And yes, Mick Jagger sings the theme.
67 Replies · 6795 views
Foxbat
Mrs. Foxbat and I are enjoying another great season so far. We only had to turn on the captions a few times.
KAB
KAB
Mrs. Foxbat and I are enjoying another great season so far. We only had to turn on the captions a few times.
I think this new season is a little too slow of a burn (as of ep #4, probably due to new show runner. However, I can't wait to find out what's up with Taverner!
  • Like
Reactions: Foxbat
KAB
KAB
Well, the season finale went balls to the wall. Non stop action and several twisted twists. Gary Oldman at his best. Very well written and executed. Tavener owes Jackson big time. Only "if" was Jack Lowden's (River) cliffhanger, especially admin-st the buzz that he is the next James Bond in waiting.
K
Planning to start the new season tonight. :)
  • Like
Reactions: Foxbat
KAB
KAB
I missed somewhere that it was renewed for season 8. That's quite something!
  • Like
Reactions: Foxbat
K
Another great season.

Sorry to see Flyte go. I also liked the Coe character. Sooner or later someone is going to take Taverner out. I think I will enjoy that.

I read that Lowden (River) was photographed during production of Season 8. Hopefully he will be back for 7 as well.