Social Feed

L
Last reply · posted in The SkyAngel / FaveTV IPTV Forum
As you may already be aware, on April 14th, Good Friday, we experienced a sudden loss of programming on 10 of our 36 channels. EchoStar Communications Corp., owner of the DISH Network satellite service, communicated to us that this loss was due to a technical failure of its EchoStar III satellite that we are currently sharing with EchoStar per a technical agreement we have with the company. We were successful in working with EchoStar to get seven of our 10 channels back on the air fairly quickly. Regrettably, three channels were not reinstated, and this technical failure evolved into contractual issues with EchoStar that, due to confidentiality restrictions in our agreement, we cannot publicly discuss. Unfortunately, despite our best efforts, we were unable to negotiate through the issues and are now prohibited from reinstating the channels that carried Three Angels Broadcasting, Golden Eagle Broadcasting and SPIRIT. Now that there is finality concerning our negotiations with EchoStar and it is certain that we will not be able to provide these three channels at this time, I wanted you to understand the reason.

I deeply regret the inconvenience that this interruption in programming may have caused you. As many of you know, we've faced a number of challenges with our relationship with EchoStar over the past few years; the Lord has guided us to positive outcomes in these cases (Romans 8:28) and we will continue to trust in Him for guidance and strength (Proverbs 3:5,6).

Presently we are exploring an option that might enable us to add one or two channels sometime in the future. We are happy to be able to continue carrying "3ABN Today" on our Angel One channel and hope to work with 3ABN to air special events, such as 3ABN's "Ten Commandments Weekend" special that we carried in May on our special events channel, Angel Two. We continue to carry Safe TV which airs several of the same programs that 3ABN airs, including Sabbath programming. Additionally, in early June, we are trading the SuperChannel TBN feed with the national Trinity Broadcasting Network (TBN) feed on Channel 9709. TBN carries many of the same programs that aired on Golden Eagle and many others that were not previously airing on Sky Angel. Also, there are programs that aired on Golden Eagle that are airing on other Sky Angel channels as well, such as Richard Roberts' "Hour of Healing" on our Angel One and Angel Two channels. Additionally, while Sky Angel already offers more contemporary Christian music than any other cable or satellite provider, we will be looking for ways to add more Christian music in cooperation with SPIRIT Television. If you are not a subscriber to our monthly printed TV guide, "Sky Angel Guide", I encourage you to visit our free online program guide at www.skyguide.org or by clicking here to find out when your favorite shows are airing.

I ask for your prayers as we continue to move forward with the vision the Lord gave my father, Robert Johnson, Sr., for this project a little more than 25 years ago. Sky Angel's mission is to build and operate a global direct broadcast satellite system, using our own satellites, as the most effective means of assuring that the Gospel will penetrate every nation, culture and people—even the most unreachable regions of the world. To build and launch our own satellite will cost in the neighborhood of $150 million dollars to achieve. It's an awesome mission in both magnitude and cost, however, one that our studies have shown is attainable with the dedication of our staff and the growing support of Christians here in America subscribing to the Sky Angel service. We have been in negotiations with a satellite manufacturer for some time and have begun an effort to identify sources that will be helpful in raising the necessary funds. Sometimes the challenge seems almost beyond comprehension, but I'm constantly reminded that with God's help everything is possible and that God's will always prevails. As we grow, it is my prayer that additional resources will become available that will enable Sky Angel to support various other works of ministry around the world with one common purpose: to share the life-changing message of Jesus Christ.

Yes, Sky Angel is a television service, still delivering into your home, church or business a wonderful array of TV and radio channels to edify, inform and entertain. But Sky Angel is also a unique work of ministry whose impact for the Kingdom has the potential to be huge. I pray that we can count on your support as we continue to trust in the Lord to guide us during this challenging yet exciting journey.

In His service,


Rob Johnson
CEO


P.S. Please understand that our call center representatives have no further information to provide.
29 Replies · 7410 views
andrews777
So will SkyAngel be over next year (in 2007)?

It doesn't look like they are really close to getting their own satellite.

Brad
TNGTony
Again, Dish Network would LOSE 6 transponders if they just let SA die by not continuing the contract. As I mentioned elsewhere, Dish does not automatically get the 8 transponders licensed to SA. The FCC's mood right now is not condusive to Dish even buying these transponders.

So it is in Dish's best interest to renew the contract in some form allowing SA access to whatever satellite is up there in exchange for the sub-lease of 6 of SA's transponders.

Tony
andrews777
That could be true, but I don't think Dish's actions here are all that helpful either. Sure, they may get some extra space at SA's expense, but it is ticking off long-term customers too. SA is something that has kept me loyal to Dish all these years. :/

Brad
K
JeffH said:
Some of what you say may be correct, but I've done a Google search on Ellen G. White. The internet allows you to do research in a way that was never possible before.

Sky Angel has sure been getting flack from some about the loss of 3ABN, even though they were carried free of charge.

As far as FTA, go for it, you don't want to be Left Behind.

Jeff

If you depend upon what you find on google to formulate your spiritual decisions, you are seriously short changing yourself.

DB
Peter Iowa
I will not be getting another annual subscrition from S.A. for the present, but
I hope they remain viable and that the situation improves.
Bruce
Supporting Founder Lifetime Supporter
Last reply · posted in Internet Television (IPTV) Discussion Forum
I was reading this article


That said this-
Last summer, for the first time, streaming services like Netflix and Amazon Prime claimed the largest share of the television viewing audience, surpassing both cable and broadcast TV. Streaming captured 34.8 percent of July viewers, according to Nielsen data, compared to 34.4 percent for cable and 21.6 percent for broadcast.

And then, sometime in the second half of 2022, cord-cutters became the majority. The share of cable and satellite television subscribers dipped to 48 percent, according to a report from Samba TV, a television technology company.


Now I do not consider those with YTTV and the likes, Cord Cutters, but they still do not have Traditional Cable/Satellite delivered Live TV, so I decided to do the math.

There are, now, 129 Million Households in the United States.

In 2015, there were 100 Million Cable/Sat Subscribers , no streaming Live TV Service.

Today, there are 66 Million Live TV subscribers, including Cable, Satellite and Streaming.

Roughly, Streaming Live TV has 14 Million subs including all of them.

So that means, Cable/Satellite now has, roughly, 51 Million Households

So in just 8 years, lost 49% of their subscribers and by the end of this year, expected sub count to be, roughly, 45 million households.

That means a total loss of 55% since 2015 at the end of 2023.

But out of 129 Million households, 45 million will mean only 35% will get Cable/Satellite Delivered Live TV by the end of 2023.

Imagine what 2024 will be like.
903 Replies · 72991 views
  • Wow
Reactions: MikeD-C05
dishdude
skipped the OLED Tv entirely?

AI slop
Bruce
According to industry figures reported by Sports Media Watch, this year's World Series averaged 11.69 million viewers on FOX, down 26% from the 15.71 million average the 2025 series delivered.
Jimbo
According to industry figures reported by Sports Media Watch, this year's World Series averaged 11.69 million viewers on FOX, down 26% from the 15.71 million average the 2025 series delivered.
That thier own stupidity ...

They make it hard to find the game when its on FOX 1 game, then FS1, then on Tru or some other little ity biyy channel that people rerely watch and can't find. (I don't know if FOX is TRU or not, but thats what I'm saying, they put games on obscure channels and expect people to easily find it and watch.
  • Like
Reactions: AZ.
Bruce
That thier own stupidity ...

They make it hard to find the game when its on FOX 1 game, then FS1, then on Tru or some other little ity biyy channel that people rerely watch and can't find. (I don't know if FOX is TRU or not, but thats what I'm saying, they put games on obscure channels and expect people to easily find it and watch.
Every WS game was on the main Fox Broadcast Channel, what are you referring to?
AZ.
AZ.
Every WS game was on the main Fox Broadcast Channel, what are you referring to?
Throughout the playoffs most games were not over the air. They were on FS1 or TrueTV, HBO, TBS....So without a sports package you need FS1, and the others you need a old school TV package. If I had to guess, close to 75% of playoff games were not on free local TV.
KAB
KAB
Pub Member / Supporter Lifetime Supporter
· posted in DISH Network Support Forum
Wireless Joey 4. Yesterday, I noticed a little green dot on a small black field in the upper right hand corner of the screen, regardless of channel, recordings, etc. A restart got rid of it, but I am curious as to what It meant and what I did to get it there.
0 Replies · 11 views
Scott Greczkowski
Staff member HERE TO HELP YOU! Cutting Edge
Last reply · posted in The Chit Chat Club
Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne


Get it?


An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....
68786 Replies · 2688478 views
  • Like
Reactions: c-spand
long_time_Dish
My Maria - Brooks & Dunn
long_time_Dish
Don't Lose My Number - Phil Collins
H
Rikki DON'T LOSE That NUMBER-Steely Dan
  • Like
Reactions: ClarkGable
ClarkGable
Longer - Dan Fogelberg
G
Lifetime Supporter
Last reply · posted in Computers and Gadgets
I have a DX100 American Electrola Radio, AM FM SW. It is a receiver only, which quit working many years ago. Several years ago the seller had stated that capacitors would need replaced because they go bad.

In this particular xxx://www.youtube.com/watch?v=3zUbXgNT8Oo they mentioned the backup battery being the problem.

Several years back when asking about having the capacitors replaced one former repairman said send it back to the factory, well there is not any. Another response several years ago from a person who repaired circuit boards for industry said they could repair it if they had a schematic, again I do not have.

This radio was built in Pittsburgh, PA out of as many American parts as they could find. Your thoughts on getting the radio to work?
24 Replies · 8283 views
D
I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.
  • Like
Reactions: Gray Hair
G
I can e-mail you pdf copies of the the manuals and schematics. The tuning not working is probably the tuning encoder. I recently found one that fits my DXC-100 from Mouser Electronic Supply. I'll be glad to include the encoder part number used to repair my radio. My radio doesn't have the battery so may be a bit different than mine.

Deheza,

Thanks for your information and offer. My Radio is actually a DXC 100 as well, was a typo in the title. Am puzzled by yours not having the battery, since they only made two runs. While the schematics would be great, I believe by the amount of views it would be better to post all the information here.

I see where numerous people have posted pdf files, just not sure how they do it.

Sorry about the long response time, just was not sure how to handle it.

Thanks,

Respectively,

Gray Hair
. Raine
If you change that diode, make sure you know what type it is, a regular rectifier, zener, whatever, don't just throw any old diode in. Try to read the number on it and look it up. Do you have a multimeter? A lot of the things in there can be easily checked with a meter.

Trying to run it off a clean 12 V source like a battery would be a good idea, like someone else suggested. In a couple of your pictures there's a 9v regulator [7809CT], and I think I saw a 5 V regulator [7805]. The 5v probably supplies the display and the 9v the radio circuitry. If you have a meter that would be a first place to check, check the three pins on each for a 12v input, a gnd, a 5v output on the 5v and a 9v output on the 9v. Bad solder connections is another good possibility.

That radio looks to be in nice shape inside. It doesn't look like anyone's worked it over, looks nice.

The back-up battery is probably just for a memory function, when you replace it make sure you use the same type, cadmium, lithium-ion, whatever it is, it should say on it what type it is and the voltage, or have a part# that can be looked up.
  • Like
Reactions: Gray Hair
O
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA
Revenerd
Another necropost here. I picked one of these up today. Does anyone out there have this manual (I'd take schematics too). I too found azenithnut's post with the missing pages 16 and 17.
(((Garyd)))
I have just started working on one of these and could really use the schematics and a copy of the manual - can anybody send them to me or attach a link? I did construct a manual from "azenithnut" , but his zip file is missing pages 16,17. My radio display only briefly lights up when powered on. the tuner and audio section appears to work fine. I have already replaced the back-up battery. I have the second generation radio. TIA
Can you send the serial-number label and photos of the tuner board, that should help distinguish its circuit revision; collector records say serials marked OB were the second production run. Use a heat gun or hair dryer to find bad caps if it works for A FEW SECONDS ITS A BAD CAP, THAN ONLY HEAT HALF OF THE RADIO
TWiT Tech Podcast Network
· posted in TWiT Tech Podcast Network
0 Replies · 48 views
G
Last reply · posted in DISH Network Support Forum
After a strange reboot last night in the middle of viewing, this morning several more reboots and about a half an hour download.
3 Replies · 284 views
Almighty1
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
  • Like
Reactions: charlesrshell
jsmit86
Just did the update check manually about an hour ago with Hopper 3 on H713 and Hopper Plus on P15403.
Noticed something new when I clicked on the Update Software, it presented a pop-up as follows:
"Update software 1573
Update later Update now Cancel" with those three buttons which did not exist before.

After updating the H715 - I guess there must be major bugs as both H709 and H714 were skipped.

So here are the issue(s):

Issue #1
It did fix the problem with H713 which was:
"One of the problems I am seeing is that the Available Joey Software section no longer is showing the Android TV versions even after a manual software reset twice and the nightly reboot. Until it does, nether Technician Android TV download and Hopper Plus is able to check, download and update the Android TV software."

This was a major problem with H703.

H710 removed that dependency so H711 and H712 were working without that dependency but H713 brought it back which is fixed in H715 as no P versions or Android TV versions are shown in the Available Joey Software on the main Diagnostics screen.
However, with that said, the TECHNICIAN SETTINGS, Download ATV (Android TV) Files is not working correctly as the Download ATV Files shows:
"Download ATV Files 3000
Download in progress. This operation will be
complete when the files are downloaded

Joey 4 : P554- Failed
Joey 4 : P55403- Failed
Wireless Joey 4 : P654- Failed
Wireless Joey 4 : P65403- Complete
HopperPlus : P154- Complete
HopperPlus : P15403- Failed

OK"
From what I can tell, each of them goes through the Downloading followed by the Processing stages first before it goes into the Failed or Complete stage. It seemed to be going in a loop earlier as it will start downloading from the first item being the Joey 4 each time before it eventually stopped. This is the first time ever since 2023 that I had ever seen it Failed.

With that said, the dependency appears to still be required for the Hopper Plus to check, download and update the Android TV software as it says Failed, No Target when going to "Device Preferences", About, "Software Update"

Issue #2
Still cannot cast to Hopper 3 with Hopper Plus(Software P15317) with the Hopper Plus "Google Chromecast Built-In" feature" as it shows up as a casting device when the Hopper Plus is online and disappears when the Hopper 3 and Hopper Plus does it's nightly reboots but times out when one tries to cast to it and always shows up as Not available in the Google Home app on Android phone. No one else anywhere on the internet had confirmed whether it is working for them or not. Per brittanygarden in DM on October 16, 2026:
"We've been working with Google on this. We have a fix on the Google side projected for Q4. I know we're in Q4 now, but I will try to get a narrowed down timeline for you."

brittanygarden and Rick Durham

jsmit86 and naptime - If you are able to use H715, does the issue mentioned below still exist?
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Almighty1
I have not been updated to 715 yet. I am on a QE "Beta" or Test version that did fix the audio issue. The last communication I had with the team mentioned that the full release of that fix was likely in December.
It would be nice to know if 715 does solve that issue of no audio when Dolby is ON, during 4K HDR events.
Interesting, is QE "Beta" or Test version different than the H708 you had mentioned that they rolled you back to or is that a newer version after that?
  • Like
Reactions: charlesrshell
Ramy
Supporting Founder
Last reply · posted in The Sports Section
Really excited for this season with Kentucky having a new coach and some really exciting recruits. Probably won't last long, but here's hoping this season is great.
190 Replies · 3644 views
  • Haha
Reactions: Mike0616
Ronnie-
The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.


Roll tide.
Jimbo
The game time was just a product of so many top 25 matchups. I think they said it was the most in one day since the 1930s.

Not everyone can play at night and get a tv slot.

Of course Lane is gonna complain. It's what he does.


Roll tide.
With Streaming, they should all be able to be on at night, no issue with TV slots :(

(Everybody can be on Peacock ... :argue:mad:) :tombstone
Ronnie-
With Streaming, they should all be able to be on at night, no issue with TV slots :(

(Everybody can be on Peacock ... :argue:mad:) :tombstone
Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.


You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.


Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.


None of them was going to be a streaming only game, and none where going on an "alternate" channel.
Jimbo
Could. Yes.

But you know as well as I that they are not going A: put all of their prime matchups on at the same time. And B: take their main games off of the main channels.


You had bama vs lsu, and Georgia vs Ole Miss to choose from.

Considering Georgia had beaten Bama and Ole Miss had beaten LSU, I can see that why they chose that game for the night matchup (without the benefit of hindsight as to how the game's Saturday would play out).

You also had Tennessee vs Kentucky to fit in the mix.


Someone had to be at 2:30. Which imo is honestly my preferred slot for bama games no matter who they are playing or where.


None of them was going to be a streaming only game, and none where going on an "alternate" channel.
Of course ... but they Could.

Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.
Ronnie-
Of course ... but they Could.
Yes. I even said so. But for reasons I gave, they won't. Wouldn't make sense for them too and they would lose money. A lot of these people that watch one of these games, watch more than one.

They want those eyeballs on as many games as possible. It just makes financial sense.

Did you realize how early that Utah vs BYU game was Saturday ... I believe it was 12 Noon EST, they are in Mountain time zone, which means they started thier game a 10 AM.
It was early. Sure.
dfergie
Staff member HERE TO HELP YOU!
Last reply · posted in What's Cooking?
We have a Breakfast and Dinner thread so... :)
Continuing from the Breakfast thread, found Cornbread mix so ...
Yellow Cornbread Mix
2 Hatch Green Chiles -diced
1 Egg
2/3 cup of milk
add to greased pan
Bake for 400f 20-25 minutes(From instructions)
now to put together and try... this to go with pinto beans...
5453 Replies · 337026 views
TRG
TRG
Tuna salad sandwich on toasted honey whole wheat bread with a handful of kettle chips. Water.
  • Like
Reactions: Bobby
TRG
TRG
Breakfast for lunch. Crispy corned beef hash, home fries, two over easy eggs and sourdough toast.

1653.webp
TRG
TRG
Grabbed a burrito on the run. Beef, pinto beans, green chile and cheese. Stewart's cream soda.

burr.webp
  • Like
Reactions: Mr Tony and dfergie
dfergie
Beef, bean green chile, cheese homemade burritos here... Water
  • Like
Reactions: TRG
dfergie
Juicy Lucy jalapeño burger… Tea
  • Like
Reactions: TRG