Social Feed

mastermesh

Last reply Jun 7, 2006 · posted in Free To Air (FTA) Discussion

anyone anywhere working on a circular+linear+cband lnbf

I'd suspect whoever could come up with something like t hat would be extremely rich in an extremely short amount of time... doubt it's possible, but new technology always pushes the limits... Who'd think circular+linear lnbfs would exit or cband+ku ? It's probably just a matter of time...

6 Replies · 3831 views

Load Replies (6) Reply Legacy View

voomvoom

Jun 5, 2006

master, I haven't tried it, but I've given it a lot of thought as well as discussed it (or tried to) in this forum and come to the conclusion that the closest you might get to doing this would be using an ADL Dual C/ku feedhorn with a regular lnb for one and an lnb with dielectric plate for the other lnb. I don't know if it will work, but I don't know why it wouldn't. I've sort of been waiting for this (below), to see how well it works first. Although it has nothing to do with you question?

PSB said:
The new BSC621-2 C/KU LNBF comes with a dielectric plate that turns it into a circular LNB!

Have not tried it yet!

http://www.satelliteguys.us/showthread.php?t=60807

Speaking of which, it's June are these ready for the consumer (me) yet?

Al

mikekohl

Jun 6, 2006

Isolation is the ugly word that is going to come up with any such device.
A dielectric plate device on a C-band feedhorn, LNBF or polarizer is only a poor man's short-cut at achieving slight improvements in circular reception without
the use of a proper true circular feedhorn (such as the ADL CP-300, the former
CP-400 polarizer, or the two port CPOR-100 circular feed).

Look at the specifications for isolation between horizontal and vertical
polarization on a typical linear C-band feedhorn. Your average everyday
inexpensive C-band polarizers are typically 25 to 30 dB between H and V.
Look at a dual port orthomode feedhorn; 35 dB can be had on some models.
Then look at a circular feedhorn such as the ADL units mentioned above,
if you can find documentation, and you will sometimes struggle to get
isolation in the teens (15-17 dB) with an orthomode circular device.

A dielectric plate is lucky to provide isolation in the single digits of dB.

What this means is that unwanted signals from the other polarity may sometimes tend to overwhelm the desired signal. It's a balancing act that is best done with an oversized antenna for the job, unless you have a proper circular feed.

Leave a dielectric plate in the feed and then try looking at a linear C-band signal.
Try one of the transponders on PAS 9 at 58 West that happens to share the exact frequency on H and V, with only a minor difference in symbol rate. This will show you true effects of poor isolation. In many cases you will be lucky to resolve one of the two signals. In some situations, maybe unacceptable on either.

A true circular feedhorn will normally reduce one linear polarity by about 3 dB
(half power), while coming very close to full power on the other linear polarity.

This is all about mathematics, and numbers usually do not lie.
Which is probably the reason why nothing fully acceptable has hit the market
even in this day and age that combines circular and linear, and especially C and
Ku-band, in the same device. Something is always going to have to be compromised, and there will never be a "perfect" feed for all situations.
You have to decide what positive attributes are important, and hope that any negative performance does not overwhelm your desired result.

(Off the soap box)

Mike

mastermesh

Jun 6, 2006

So PSB, how's that testing going on the Primestar?

And what can you pick up with it? I'd just be interested in this sort of stuff if it worked on that since I have an old Primestar sitting in the basement that and some old Direct TV dishes just waiting to be torn apart to get Primestar working as a KU/Circular (and maybe C Band?) dish

PSB

Jun 6, 2006

I gave up on the 40" P* dish for C-Band when I got a 6' dish! I get about 99% of the C-band satellites NO PROBLEM now

Tron

Jun 7, 2006

Pete, nice dish farm you have growing

And they're all painted the same color too!

View all replies (6)

Gary Toma

Staff member Pub Member / Supporter Cutting Edge

Last reply 3 minutes ago · posted in DIRECTV Technical Resources Forum

DIRECTV Transponder Map ~ Data 10/21/2026

The TPN Map Excel Presents all DIRECTV Channels:

National (50-States or wide/NAT+PR beams)
Local (Local-Into-Local or narrow/Spot beams)

Additional tabs provide:

OTA the (Over-The-Air) Database
VOD (Video On_Demand) Records
Offline Records
Engr Records
Net Decoder a graphic presentation of all satellites and transponders

Domestic Satellites
@99W...... D11, D14
@101W.... D16
@103W.... D12, D15
@110W.... D5
@119W.... D8

Understanding the TPN Map

Making Sense of the TPN Map Display Conventions

DIRECTV_TPN_Map_261021.xlsx 1,876 KB

2163 Replies · 937279 views

Load Replies (2163) Reply Legacy View

Reactions: Zakdj, Mr Tony, Tom Speer and 3 others

jamieh1

Wednesday at 8:24 PM

Now in the Hornets and Hurricanes markets we just get the TV promise screen. But Directv still charges sports fee I am assuming.
Luckily my DTV stream package doesn't have a rsn fee. Figure DTV that always says is the leader in sports would have come to an agreement by now.

Reactions: Mr Tony

KyL416

Wednesday at 9:33 PM

jamieh1 said:
Now in the Hornets and Hurricanes markets we just get the TV promise screen. But Directv still charges sports fee I am assuming.

Greenville-New Bern is $11.99 for MASN (Orioles) and Nationals
Raleigh is $11.99 for MASN and Nationals
Charlotte is $12.99 for BravesVision, MASN, Nationals and Reds

The fee in NC also includes the higher in state rate they have to pay for ACCN. Down in SC the fee is $15.99 as they are also a SEC state.
I'm not sure if they're doing it with those teams, but in some markets they also use the fee to cover the additional cost they have to pay for independents and MyNet stations that picked up full season NHL and NBA rights.

If you go to the TVPromise site, you'll likely be able to get a credit for not getting the Hurricanes and additional Hornets games that air on WITN-D2

jamieh1 said:
Figure DTV that always says is the leader in sports would have come to an agreement by now.

Part of the hold out might be the packaging and price for outer areas like how the Thunder needs sports pack for other states. Hopefully they are also pushing for a guarantee from the teams that they would require whoever wins their local broadcasting rights in 2028 to negotiate with MVPDs. Commercial distribution rights are probably a factor too.

I'm guessing they got a deep discount for the Clippers based on how long it took them to officially announce ClipperVision and their KTLA simulcasts after they were basically handed a multi-year draft death penalty.

The Predators and Pistons channels are using feeds supplied by Scripps Sports

The Heat likely depends on whoever they sign for the Fort Myers DMA, as there's no point in paying a high price for the Heat just for that DMA when WPLG is streaming it for free on their app and website for viewers in the Miami DMA, and they already carry the West Palm Beach station.

Reactions: Mr Tony

KyL416

Today at 3:20 PM

660 CAVLIERS, 668 TWOLVES and 680 SPURS are now available

Reactions: Mr Tony, coolman302003 and Nate.O’Brien

KyL416

Today at 5:57 PM

KyL416 said:
The Heat likely depends on whoever they sign for the Fort Myers DMA, as there's no point in paying a high price for the Heat just for that DMA when WPLG is streaming it for free on their app and website for viewers in the Miami DMA, and they already carry the West Palm Beach station.

WINK-D3 (Weather) for Fort Myers

https://www.nba.com/heat/news/heat-...st-partnership-with-wink-in-southwest-florida

Reactions: Mr Tony

KyL416

Today at 6:57 PM

WPLG Miami is testing on the stream server again

Reactions: Nate.O’Brien

Mr Tony

44 minutes ago

KyL416 said:
660 CAVLIERS, 668 TWOLVES and 680 SPURS are now available

Still with Choice package? My stepdad says when the game started he got black screen and something to do with not the right package.
He had the Twins the last 2 years and I saw the Wild screen on 668-1 when I was there a few weeks ago.

KyL416

14 minutes ago

There were some technical issues during the pregame, where 668 was showing the Pacers feed instead of the Timberwolves feed until a few minutes before the game.

On the stream API it looks like some areas need the Sports Pack, what's his zip code?

Reactions: Mr Tony

Mr Tony

3 minutes ago

KyL416 said:
There were some technical issues during the pregame, where 668 was showing the Pacers feed instead of the Timberwolves feed until a few minutes before the game.

On the stream API it looks like some areas need the Sports Pack, what's his zip code?

55379
It's Shakopee (suburb of Minneapolis and considered part of the Twin Cities). They have the satellite version, not streaming

View all replies (2163)

Bobby

Supporting Founder Lifetime Supporter

Last reply 46 minutes ago · posted in DISH Network Support Forum

4K Events Discussion Thread

This thread is a place to discuss the 4K events that appear on channel 540. We are getting, at this point, one college football game a week. Let's hope there is more coming.

1933 Replies · 299546 views

Load Replies (1933) Reply Legacy View

Reactions: Rixos, DWS44 and charlesrshell

Bobby

Oct 13, 2026

MLB, Brewers at Dodgers, Thursday 10-15, 6PM PDT, Channel 148-02.

Reactions: charlesrshell

Foxbat

Oct 15, 2026

Bobby said:
MLB, Brewers at Dodgers, Thursday 10-15, 6PM PDT, Channel 148-02.

Bobby said:
CFB, Notre Dame at BYU, Saturday 10-27, 4:30PM PDT, Channel 148-03.

Bobby said:
CFB, Ohio State at Indiana, Saturday 10-17, 9AM PDT, Channel 148-01.
CFB, Arizona State at Texas Tech, Saturday 10-17, 12:30PM PDT, Channel 148-01.

Hmmm, I'm not seeing anything like those events in our Hopper 3 guide for tonight or Saturday.

I went into the Tools menu and requested a Guide Update. I'll try looking at it after the update completes.

edit — I now have the 148-01 4KFox events for Saturday, but not anything for 148-02 or 148-03 which don't even show as available channels. I do have 148-04 4KUSA.

Reactions: charlesrshell

Bobby

Oct 15, 2026

Foxbat said:
Hmmm, I'm not seeing anything like those events in our Hopper 3 guide for tonight or Saturday.

I went into the Tools menu and requested a Guide Update. I'll try looking at it after the update completes.

edit — I now have the 148-01 4KFox events for Saturday, but not anything for 148-02 or 148-03 which don't even show as available channels. I do have 148-04 4KUSA.

As I recall you have the Flex package. Do you sub to multisport? -02 is FS1 and -03 is ESPN. -01 is Fox so you would get that if you sub to locals.

Reactions: Foxbat and charlesrshell

Bobby

Oct 15, 2026

Bobby said:
As I recall you have the Flex package. Do you sub to multisport? -02 is FS1 and -03 is ESPN. -01 is Fox so you would get that if you sub to locals.

As an edit, you need to sub to the National Action Pack at $12 a month to receive those channels.

Reactions: Foxbat and charlesrshell

Foxbat

Oct 15, 2026

Which is what is interesting, I see the 4KFox channel on 148-01 but we're not subscribed to our Locals. So why it's coming in is puzzling. I thought that maybe it was a perk for Dish subscribers for the MLB Postseason.

I set a Timer for the Indiana - Ohio State game on Saturday. I'll take advantage of it while I can.

Reactions: long_time_Dish, slow_poke_pete and charlesrshell

Foxbat

Today at 4:48 PM

Foxbat said:
I set a Timer for the Indiana - Ohio State game on Saturday. I'll take advantage of it while I can.

Even though it didn't work out for the Hoosiers, this event recorded and I was able to watch it in full 4K HDR.

Bobby said:
MLB, Rays at Brewers, Friday 10-23, 5PM PDT, Channel 148-01.

Timer is set to Record the Series. Thanks, Bobby!

Reactions: long_time_Dish, charlesrshell and Bobby

long_time_Dish

46 minutes ago

No NASCAR in 4K on Sunday? Bummer...

Reactions: charlesrshell

View all replies (1933)

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply 50 minutes ago · posted in The Chit Chat Club

Song Name Game Part 3!

Sometimes a thread gets so many posts in it that is can cause issues for the server so that why today we introduce The Song Name Game Part 3!

So let the game continue!

The last song was added by Bobby who posted...

One Meat Ball - Andrews Sisters

CONTINUE ON AND HAVE FUN! WELCOME HOME TO SATELLITEGUYS.US!

Here are the original rules for the game as posted by WebbyDude back in 2006. http://www.satelliteguys.us/threads/68645-Song-Name-Game

Just name a song title and the band who performed it. The next person does the same thing, but needs to list a song title or band name which includes a word from the previous entry. Pick songs from any genre.

Example:

Long Live Rock and Roll -- Rainbow

Rainbow in the Dark -- Dio

Another example:

Ride the Lightning -- Metallica

Lightning Strikes -- Ozzy Osbourne

Get it?

An additional note: we all know that song titles, sometimes, use profane words. Because this is a family friendly website it is advised that you clean up that title up a bit. This is accomplished by using something like sh!t instead of the real word. Thanks....

68586 Replies · 2676530 views

Load Replies (68586) Reply Legacy View

Reactions: c-spand

long_time_Dish

Today at 4:23 PM

Go On Cry - Heart

Reactions: dishstaller

dishstaller

Today at 4:25 PM

Let Her Cry - Hootie & the Blowfish

harshness

Today at 4:33 PM

Let Her In - Vince Gill

sdfntx

Today at 4:52 PM

Devil in Her Heart - The Beatles

long_time_Dish

50 minutes ago

Take Me To Heart - Quarterflash

View all replies (68586)

dishstaller

Pub Member / Supporter Lifetime Supporter

Last reply Today at 6:50 PM · posted in The Chit Chat Club

You can't even trust the cost per ounce info in grocery stores anymore

I'm surprised Walmart hasn't banned this guy from all of their stores. He has been on their CASE the past few months.

View: https://www.youtube.com/shorts/f3zr37ekgKM?feature=share

35 Replies · 396 views

Load Replies (35) Reply Legacy View

Reactions: NYDutch

Juan

Wednesday at 1:38 PM

dishstaller said:
Then they are stupid. Everyone knows that the price per ounce should be the price per ounce of actual product.

You are paying for the whole thing

telstar_1

Wednesday at 2:22 PM

Juan said:
You are paying for the whole thing

Well, the bag can't weigh that much, right? But by law food product packaging must display the actual net weight of the product, i.e., the contents of the container, so by any logic, if not law, a store's stated per-ounce cost should reflect that figure. But since there's not any law regulating shelf statements, a store can say whatever it wants without violating any rules. So I guess the answer is more consumer legislation. Or simply caveat emptor.

Juan

Wednesday at 3:07 PM

telstar_1 said:
Well, the bag can't weigh that much, right? But by law food product packaging must display the actual net weight of the product, i.e., the contents of the container, so by any logic, if not law, a store's stated per-ounce cost should reflect that figure. But since there's not any law regulating shelf statements, a store can say whatever it wants without violating any rules. So I guess the answer is more consumer legislation. Or simply caveat emptor.

But a box can weigh more than an ounce..maybe 2...a can might weigh 5 ounces..a bag...not much

dishstaller

Wednesday at 3:13 PM

Juan said:
.a bag...not much

Well, according to the price per ounce on that first bag of coffee he mentions, that would mean the bag weighed over 6 ounces. That bag does NOT weigh 6 ounces. According to Google, an empty bag weighs half an ounce.

Juan

Yesterday at 7:13 AM

dishstaller said:
Well, according to the price per ounce on that first bag of coffee he mentions, that would mean the bag weighed over 6 ounces. That bag does NOT weigh 6 ounces. According to Google, an empty bag weighs half an ounce.

You need to weigh the actual bag...a deli bag weighs less than that but a thick coffee bag is gonna weigh around an ounce...an empty tin can has some weight

NYDutch

Yesterday at 7:44 AM

Juan said:
You need to weigh the actual bag...a deli bag weighs less than that but a thick coffee bag is gonna weigh around an ounce...an empty tin can has some weight

Products sold by the ounce, pound, etc, should always be priced for the product only. Only the shipping weight should include the packaging.

Reactions: navychop, Foxbat, slow_poke_pete and 2 others

harshness

Yesterday at 9:21 AM

NYDutch said:
Products sold by the ounce, pound, etc, should always be priced for the product only.

Unless the specific product or its packaging is known at the time of weighing, estimating the tare weight for a PoS system is a tall order.

I'm pretty sure that produce bags can't get any thinner.

You certainly don't want to put unbagged produce on a belt, scale, or in a clerk's hands (gloved or not).

Jimbo

Yesterday at 9:27 AM

harshness said:
Unless the specific product or its packaging is known at the time of weighing, estimating the tare weight for a PoS system is a tall order.

I'm pretty sure that produce bags can't get any thinner.

You certainly don't want to put unbagged produce on a belt, scale, or in a clerk's hands (gloved or not).

I would think that all the packaging would already be accounted for ... they weigh the container, subtract that from the scale, then add the product , so its weighing the Product only

Reactions: Bobby, dishstaller and NYDutch

harshness

Today at 4:42 PM

Jimbo said:
I would think that all the packaging would already be accounted for ... they weigh the container, subtract that from the scale, then add the product , so its weighing the Product only.

You would be thinking wrong when it comes to goods that are sold by weight (meat, produce, nails). Those items typically go on the scale wrapped without an associated tare. The weight only excludes the sticker because it hasn't been printed yet.

Jimbo

Today at 5:08 PM

harshness said:
You would be thinking wrong when it comes to goods that are sold by weight (meat, produce, nails). Those items typically go on the scale wrapped without an associated tare. The weight only excludes the sticker because it hasn't been printed yet.

Thats ridiculous ....

Thats not how Deli does it, I know your talking pre packaged.
They need to CHANGE that.

Jimbo

Today at 5:14 PM

A pound of Coffee, does that include the package it's in ?

No, a pound of coffee refers strictly to the net weight of the coffee itself (16 ounces), not including the weight of the bag or packaging. [1, 2]

Net Weight: Food and coffee sold by weight are required by law to list the net weight on the label, which measures only the contents inside the package. [1, 2]
- Packaging Weight: The foil bag, valve, and label add extra weight to the total item when you hold it, meaning the gross weight on a scale will be slightly more than 16 ounces.
- Watch Out for Bag Sizes: Always check the label carefully, as many specialty roasters now sell 12-ounce (three-quarter pound) bags while keeping the price or visual impression similar to a full pound. [1, 2, 3]

meStevo

Today at 5:40 PM

The larger discrepancies are likely from a data or sync issue. Digital tags don't cause the error, but they can spread one bad entry across a whole store or region instantly. The small cent differences are probably just rounding in the weight, the price data, or both.

Reactions: Juan

harshness

Today at 6:50 PM

Jimbo said:
Thats not how Deli does it, I know your talking pre packaged.

Perhaps only for sliced meat and cheese. Salads and similarly "shifty" or "drippy" items are typically weighed in deli cartons of some sort.

My monster burritos (up to two lbs.) are weighed in their foil jackets or paper mache take-out trays, and the jacket/tray is then "sealed" with the printed label as it comes off the printer.

Precision has to give way to practicality in situations like that.

View all replies (35)

iJustine

Today at 6:33 PM · posted in iJustine

iPhone Duo Day at The Apple Store Los Angeles!

Time for another AWESOME video from iJustine!

View: https://www.youtube.com/watch?v=q8XjBdqOb-0

Direct YouTube Link - iPhone Duo Day at The Apple Store Los Angeles!
The official iJustine Website's Website
Buy her book!

0 Replies · 6 views

Replies Reply Legacy View

Scott Greczkowski

Staff member HERE TO HELP YOU! Cutting Edge

Last reply Today at 6:08 PM · posted in Free To Air (FTA) Discussion

Memories

View: https://youtu.be/2B6vCcmvnJc?si=i-ewdyqeAwBWEPgR

12 Replies · 251 views

Load Replies (12) Reply Legacy View

Reactions: iBoston, byron, osu1991 and 5 others

reubenray

Oct 14, 2026

I had a BUD in the 80's before the little small dishes started showing up. The signals were unsrambled and then I had to get a monthly code.

Reactions: dfergie

FTA4PA

Oct 14, 2026

Scott Greczkowski said:
View: https://youtu.be/2B6vCcmvnJc?si=i-ewdyqeAwBWEPgR

Only 28 years ago and look how different things are now.

dfergie

Oct 14, 2026

I forgot about the tv antenna rotator to change polarity…

telstar_1

Oct 14, 2026

reubenray said:
I had a BUD in the 80's before the little small dishes started showing up. The signals were unsrambled and then I had to get a monthly code.

You mean you were pirating the VCII and entering "Wizard numbers" every month after key change? GI finally resorted to changing out the keys twice as often, then even more often, down to just hours, making it mostly untenable?

Reactions: FTA4PA and reubenray

iBoston

Today at 5:55 PM

When i was a kid, i used to salivate envisioning me having a Cband dish. It wasn't until about 1995, I installed my first Cband dish, and i remember it took me about 2 weeks to get that dish aligned properly.. This was before internet, and i had to call and talk with people on the phone about advice on how to properly tune the dish. I can't remember the receiver, but it had a UHF remote. I had the satellite receiver in the living room, but i ported it to two TV's, one in the living room and one in the bedroom. It was so nice being able to control the receiver with the remote in the bedroom about 40 feet from the living room. I remember watching Rosanne feeds where it would air the entire week in succession. Nice nostalgia.

navychop

Today at 6:08 PM

iBoston said:
I remember watching Rosanne feeds

I'd wipe THAT memory ASAP!

View all replies (12)

SuperDish_Fan23

Last reply Today at 5:58 PM · posted in DISH Network Support Forum

Its crazy how the ViP922 is so rare for no reason.

Why are ViP922s So rare? like its crazy how ebay has none, i checked everywhere, also, i got a ViP222k now, which is actually activated!

32 Replies · 899 views

Load Replies (32) Reply Legacy View

Almighty1

Yesterday at 8:53 PM

I remember this in the news too...

$14,000 spent on rented rotary phone

A widow rented a rotary dial telephone for 42 years, paying what her family calculates as more than $14,000 for a now- outdated phone.

www.nbcnews.com

Reactions: MikeD-C05 and charlesrshell

Bobby

Yesterday at 9:21 PM

Almighty1 said:
I remember this in the news too...

$14,000 spent on rented rotary phone

A widow rented a rotary dial telephone for 42 years, paying what her family calculates as more than $14,000 for a now- outdated phone.

www.nbcnews.com

That is a misnomer. In the old days you subscribed to telephone service. That included the telephone line and one telephone. An extension cost $1 a month extra. So that $14,000 over 42 years was for the service not the leased telephone. There is no way they paid $28 a month for 42 years for a leased telephone.

Reactions: MikeD-C05, charlesrshell, AZ. and 2 others

HIFI

Today at 12:44 AM

anybody remember this disaster ?

Reactions: MikeD-C05, charlesrshell and dishdude

SuperDish_Fan23

Today at 4:24 PM

SuperDish_Fan23 said:
Why are ViP922s So rare? like its crazy how ebay has none, i checked everywhere, also, i got a ViP222k now, which is actually activated!

Whoever still has their 922, please let me know i just wanna see photos of the ui and other stuff

Reactions: charlesrshell

slow_poke_pete

Today at 5:51 PM

SuperDish_Fan23 said:
Whoever still has their 922, please let me know i just wanna see photos of the ui and other stuff

View: https://www.youtube.com/watch?v=7wL6dsORmXg

Reactions: charlesrshell

telstar_1

Today at 5:58 PM

Slicker guides never did much for me

Reactions: charlesrshell

View all replies (32)

JSheridan

Lifetime Supporter

Last reply Today at 5:58 PM · posted in DISH Network Support Forum

All DMA's now Western Arc

I know HipKat said that they were working on conversions but we got the official news yesterday right from Dish that starting next month all DMA's will be on the western arc, and all customers will be assigned to that. That's gonna mean a lot of customers around here aren't gonna get Dish unless there are exceptions. Too many mountains and trees.

145 Replies · 3748 views

Load Replies (145) Reply Legacy View

Reactions: That American Girl, MikeD-C05, AkaDoubleG and 6 others

navychop

Oct 3, 2026

Years down the road

Reactions: scoob83 and charlesrshell

renjy651

Oct 4, 2026

navychop said:
Years down the road

Looks like Charlie Ergen will never give up satellite TV. The reason Echostar 25 the most poweful DBS satellite ever built at 110 location already. Also Echostar 26 another super satellite on order for 119 orbital location will be ready in 15 months. he will have 110/119 for another 20 years. Dish will be the only satellte company left. The reason for rural areas and some people like satellite easy to operate and change channels in seconds.

Reactions: Jimbo, HipKat, MikeD-C05 and 1 other person

Mister B

Oct 5, 2026

renjy651 said:
Looks like Charlie Ergen will never give up satellite TV. The reason Echostar 25 the most poweful DBS satellite ever built at 110 location already. Also Echostar 26 another super satellite on order for 119 orbital location will be ready in 15 months. he will have 110/119 for another 20 years. Dish will be the only satellte company left. The reason for rural areas and some people like satellite easy to operate and change channels in seconds.

I hope these new "most powerful" satellites will mean that DISH can provide every channel that can be sourced in HD in HD. I do not like the fact that two of my favorite channels (Start and H&I) are SD. I was also very disappointed after installation that METV has to be streamed from my internet connection. Finally, I dropped the locals upon seeing that my local CW channel is in blurry letterboxed SD when it has been HD OTA for years.

Reactions: scoob83, telstar_1, zippyfrog and 3 others

slow_poke_pete

Oct 5, 2026

Mister B said:
I hope these new "most powerful" satellites will mean that DISH can provide every channel that can be sourced in HD in HD. I do not like the fact that two of my favorite channels (Start and H&I) are SD. I was also very disappointed after installation that METV has to be streamed from my internet connection. Finally, I dropped the locals upon seeing that my local CW channel is in blurry letterboxed SD when it has been HD OTA for years.

my me t.v. is in HD via the sat. though it's better PQ via ota

Reactions: MikeD-C05 and charlesrshell

zippyfrog

Oct 5, 2026

Mister B said:
I hope these new "most powerful" satellites will mean that DISH can provide every channel that can be sourced in HD in HD. I do not like the fact that two of my favorite channels (Start and H&I) are SD. I was also very disappointed after installation that METV has to be streamed from my internet connection. Finally, I dropped the locals upon seeing that my local CW channel is in blurry letterboxed SD when it has been HD OTA for years.

This piece gets me - the fact that Dish has removed SD channels from satellite completely in the name of "HD upgrades". I pay for satellite TV, not streaming...I don't see why they couldn't leave the SD version of the channels on Satellite then put the HD streaming version like they have for other channels.

Reactions: Mister B and charlesrshell

telstar_1

Oct 5, 2026

Is any SD-only receiver still operating?

Reactions: charlesrshell

brad1138

Oct 5, 2026

telstar_1 said:
Is any SD-only receiver still operating?

Reactions: charlesrshell

navychop

Oct 5, 2026

zippyfrog said:
This piece gets me - the fact that Dish has removed SD channels from satellite completely in the name of "HD upgrades". I pay for satellite TV, not streaming...I don't see why they couldn't leave the SD version of the channels on Satellite then put the HD streaming version like they have for other channels.

CONTRACTS!

Reactions: charlesrshell, zippyfrog and dishrich

Mister B

Oct 6, 2026

slow_poke_pete said:
my me t.v. is in HD via the sat. though it's better PQ via ota

Yes, I considered D* as I knew some of my favorite channels had better PQ but too many require moving up to the "Choice" package and incurring the Regional Sports Fee.
I do not have METV or any of the Weigel owned channels here in El Paso.

Reactions: slow_poke_pete and charlesrshell

Henry Sanchez

Today at 5:21 PM

What about the commercial services? will they keep using single Stacked or DP single/dual LNB's?

Reactions: charlesrshell

telstar_1

Today at 5:58 PM

navychop said:
CONTRACTS!

At this point one can only ask whether any live ch's are still distributed in SD. Other than maybe "classics" ch's that run only older stuff

Reactions: charlesrshell

View all replies (145)

TWiT Tech Podcast Network

Today at 5:02 PM · posted in TWiT Tech Podcast Network

Glenn's Pick of the Week: The Vevor Automatic Tape Dispenser

Time for another AWESOME video from the TWIT Network!

View: https://www.youtube.com/shorts/Yn1fIBkbJDQ

Direct YouTube Link - Glenn's Pick of the Week: The Vevor Automatic Tape Dispenser
TWIT's Website
TWIT Live Feed

0 Replies · 8 views

Replies Reply Legacy View

SatZach

Last reply Today at 4:30 PM · posted in The Chit Chat Club

Hello again

I haven't posted in almost 17 years. Over the air, sat, offline, anything-but-the-internet is still one of my avid pursuits. Been playing with offline tv viewing and offline web browsing. I have great appreciations for this site still being here. It's so hard to find public communities that haven't sold out to social media company.

4 Replies · 83 views

Load Replies (4) Reply Legacy View

Reactions: Scott Greczkowski, dishstaller, FTA4PA and 1 other person

dishstaller

Today at 3:11 PM

Got to admit, I had to look up "offline web browsing". I had never heard of it.

Reactions: Jimbo

Scott Greczkowski

Today at 3:12 PM

Welcome back, as you can see we branched off into a bunch of things since Satellite is what it is now, so lots to talk about here.

Reactions: comfortably_numb

Jimbo

Today at 3:16 PM

dishstaller said:
Got to admit, I had to look up "offline web browsing". I had never heard of it.

From what I understand, it's just saving a article or whatever, to Save it so you can read it later ....
Unless he's talking something entirely different ... the way I am looking at it, you Still need the Internet to load it originally.

Reactions: comfortably_numb

dishstaller

Today at 4:30 PM

Jimbo said:
the way I am looking at it, you Still need the Internet to load it originally.

That was kinda the way I understood it as well.

Reactions: comfortably_numb

Top

Back

Search

Search

Social Feed

anyone anywhere working on a circular+linear+cband lnbf

DIRECTV Transponder Map ~ Data 10/21/2026

4K Events Discussion Thread

Song Name Game Part 3!

You can't even trust the cost per ounce info in grocery stores anymore

iPhone Duo Day at The Apple Store Los Angeles!

Memories

Its crazy how the ViP922 is so rare for no reason.

$14,000 spent on rented rotary phone

$14,000 spent on rented rotary phone

All DMA's now Western Arc

Glenn's Pick of the Week: The Vevor Automatic Tape Dispenser

Hello again